AMPIRE CPM100 Smartphone display 25.4cm (10'') with Apple CarPlay, Android Auto, dashcam, rear view camera input

DISPLAY
- 10" IPS LCD touch screen monitor
- 9.2" / 23.4cm visible diagonal
- 24:9 aspect ratio
- Touchscreen operation
- Adjustable LED backlight
- Extremely high resolution of 1600 x 600
- Brightness 750cd/m²
- Contrast 1000:1
- Clock frequency 60Hz
- Vertical viewing angle 130°
- Horizontal viewing angle 150°
- Our monitors are subject to ISO 9241-307, pixel error class II


SMARTPHONE INTEGRATION
Wireless Apple CarPlay
Minimum requirement: iPhone 5 and higher

Wireless Android Auto
Minimum requirements: Android 11, Android Auto 4.8 and WiFi 5GHz*
*IEE Standards 802.11a, 802.11ac, 802.11ax, 802.11be & 802.11n
ATTENTION! Devices that only have WiFi 2.4GHz are not supported and are not compatible!

Bluetooth


AHD dual dash cam
Integrated front camera on the back of the monitor
- Analog high definition
- 1080p (1920 x 1080 pixels resolution)
- 30fps frame rate
- Viewing angle: 120° horizontal, 145° diagonal

System rear camera
- Analog high definition
- 1080p (1920 x 1080 pixels resolution)
- 30fps frame rate
- Viewing angle: 120° horizontal, 145° diagonal
- 4P MINI-DIN system connector
- Dimensions without butterfly holder: 23 x 23 x 32mm

recorder
- Recording resolution: 1080p+1080p or 720p+720p (adjustable)
- Segment length: 1 minute, 3 minutes, 5 minutes
- Audio recording can be switched on
- Parking lot mode with motion detection and time-lapse recording. 12h or 24h adjustable, undervoltage protection at 11.8V
- Memory card type: microSD (not included)
- microSD Speed Class: Class 10 or higher
- microSD storage capacity: min. 32GB to max. 256GB
- Recording capacities: 32GB approx. 4.5 hours, 64GB approx. 9.5 hours, 128GB approx. 19 hours, 256GB approx. 38 hours, then the oldest recordings are overwritten.
- Power-on delay (ACC ON): 17 seconds
- Parking mode activation delay: 0 seconds
- Switch-off delay (ACC OFF): 15 seconds


BACKUP CAMERA
- The system rear camera is used as the reversing camera. No need to install an additional reversing camera.
- 12 volt switching input for activation
- Immediate switching to the system rear camera in full screen with guides when reverse gear is engaged
- Auxiliary lines individually adjustable
- Switch-off delay of 3 seconds when disengaging reverse gear
- The dash cam recording function is not interrupted in rear camera mode
- Image display can be set to normal/mirrored


AUDIO OUTPUT
- Audio output with 3.5mm jack cable
- FM transmitter for alternative sound reproduction (87 - 108 MHz.)
- Integrated 2 watt speaker with its own housing


OTHER
- LINUX 4.9 OS operating system with 1GB memory
- Apple CarPlay and Android Auto in full screen mode, or in half screen mode with simultaneous display of one camera (selectable)
- SD card reader (Mirco SD)
- USB-C input for power supply
- USB-C wired power supply with ACC ignition logic
- Menu languages: DE, EN, FR, ESP, RU, JPN, CN, KOR
- Automatic switch-on when the operating voltage is applied
- Operating voltage 9V - 36V DC
- Current consumption ACC ON: 600mA@12VDC
- Current consumption ACC OFF: 8.1mA@12VDC
- Current consumption in parking lot mode: 290mA@12VDC
- Operating temperature: -20° to 70°C
- Storage temperature: -30° to 80°C
- Monitor dimensions (without stand): 240 x 100 x 33mm (42mm with front camera)
- System hack camera dimensions: 23 x 23 x 32mm
- Weight of monitor with stand: 518g

• 10" (25.4cm) touchscreen monitor
• foot mount
• USB-C connection cable for power supply with +12V, ground and ignition (ACC), 320cm
• AHD system rear camera, 1080p, with butterfly holder and 50cm cable
• Connection cable for system rear camera, 550cm
• Connection cable audio output (3.5mm jack), 120cm