Versandkosten: 4,99 €
Nowadays, modern vehicles have highly complex media and sound systems installed at the factory. These systems expect low impedance, a typical 4 ohm load at the speaker outputs. If you then connect an active amplifier or DSP, they usually have a much higher input impedance in the kiloohm range, which the clever factory diagnostic functions interpret as a broken speaker. This can cause the following problems:
These problems are solved by AudioControl AC-LGD's with carefully selected resistors and a sable network in such a way that they generate load and stabilisation signals to simulate a 4-Ohm load typical for loudspeakers to the factory system.
The AC-LGD's are supplied in pairs and can be easily connected with the pre-assembled connectors of the AudioControl Factory System Upgrade products. The AC-LGD's are installed between the factory speaker outputs and either the AudioControl High-Low Converter, the speaker inputs of an amplifier or a DSP. Each LGD pair is supplied with standard front and rear wire colors.
AudioControl's active high-low converters and DSP's (like LC2i and DM-810) are known worldwide for having the widest available voltage range. When using AC-LGD's you have to limit the voltage input through the device. The recommended maximum load capacity of the AC-LGD's is 150 watts or 25 volts.
Technical data |
|
---|---|
Scope of delivery |
|
Brand | AudioControl |
Product Type | signal stabilizer |
EAN | 4047442090592 |
Compatible with: | these OEM non-amplified (no external amplifier) vehicles (2015 up):
|
---|