AudioControl AC-LGD Load Generating Device & Signal Stabilizer

AudioControl AC-LGD Load Generating Device & Signal Stabilizer

Open / test report (PDF)

Today’s factory systems include more Class D amplifier technology which can mute, distort or emit damaging frequencies to your new aftermarket audio equipment when the factory speakers are removed. Using carefully selected resistors and a Zobel Network, the AC-LGD has been designed to generate load and stabilize signal from the factory system to ensure the best possible audio.

The LGDs come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors. The LGD is installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor. Each LGD pair comes with standard wire colors for front and rear connections

Alle Features im Überblick

• Important things to remember

  AudioControl active line output converters and processors (such as LC2i and DM-810) are world renowned for having the widest voltage range available. When using the AC-LGD, you must limit voltage input through the device. The maximum recommended power handling for the AC-LGD is 100 watts or 20 volts. To prevent damage or overheating, do not install or mount the AC-LGD below carpet or near heat sensitive components.

• Installation is simple

  Remove one input plug from your AudioControl active line output converter (LOC). Unplug one end of AC-LGD then plug the AC-LGD into the LOC. Install the plug you removed from the LOC to the open end of the AC-LGD. Connect your factory speaker signals to the AC-LGD. If you are using a LOC with different style connectors, you may unscrew the connectors from the AC-LGD wires and install different ones.