Powered by Smartsupp
Produktfinder Finde alles für Dein Fahrzeug

Wird geladen …

AudioControl Matrix Plus 6CH Line Driver with optional Level Control

279,00 €
Incl. 19% VAT.
  • High signal voltage capability: 13 volts peak output
  • 24dB of gain
  • Six channels of input and output
  • Balanced differential inputs
  • Low-impedance outputs
  • Optional Remote Level Control (ACR-1)
  • PFM Subsonic filter
  • Output level controls
  • Ultra-low distortion, ultra-quiet operation
  • Selectable ground isolation
  • Optimum voltage indicator LED’s
Bitte beachten Sie, dass der Versand nach Belgien, Luxemburg, Niederlande nicht möglich ist.
A18064
Delivery Time 8 - 11 Days*
Delivery Cost in Dtl.

Versandkosten: 4,99 €

AudioControl Matrix Plus 6CH Line Driver with optional Level Control

AudioControl created the MATRIX PLUS six channel line driver with one goal in mind, to make your car audio system sound better. Modern car stereos boast many features but in many cases rather low pre-amp outputs, especially at low levels. Turn your stereo to a normal volume level, send the signal through a 20-foot cable, and your amps may end up with very little audio signal resulting in weak sound.

Equipped with 24 dB of gain, which can increase pre-amp signal levels up to 9.5 volts RMS/13 volts peak, the MATRIX PLUS line driver will transform your audio system. When integrating multi-media and video games or for driving dozens of amplifiers the MATRIX PLUS line driver gives your system a boost. With multiple sources, like video, the MATRIX PLUS level matches the different volume levels so switching between them is seamless. For SPL vehicles, the internal linking system of the Matrix means that two channels of input can drive all six outputs and each output can drive up to seven amplifiers.

The MATRIX PLUS line driver features an optional dash control input which facilitates remote control of pre-amp signal levels. This makes the MATRIX PLUS line driver an ideal controller for overall system master volume or subwoofer levels.

Let the AudioControl’s MATRIX PLUS put your system into high gear.

Alle Features im Überblick

  • High-Voltage Line Driver

    The Matrix Plus is a pre-amp line driver that takes the input signal from up to three source units, increases it (up to 13 volts peak) and then delivers it downstream. No more low signal output voltages to allow noise into the rest of your performance car audio system.

  • Six Channel Inputs & Outputs

    The Matrix Plus was designed for ultimate pre-amp flexibility. With that in mind we have provided six channels for input and six for output! For even more flexibility, the Matrix Plus inputs can be linked internally whereby one input channel can feed one, two, or three output channels.

  • Balanced Inputs

    The Matrix Plus features balanced differential input circuit that rejects noise that radiates into the signal path between the source unit and your Matrix Plus. Even better, this circuit uses standard RCA connectors.

  • Anti-Oscillation Output Circuitry

    Driving long lengths of cable can present a nasty capacitive load to the source that has to drive them. This capacitance can cause instabilities, which can lead to oscillations, radio interference and excessive system hiss. The Matrix Plus’s low-impedance, high-current output circuitry easily handles long cable runs without their associated problems.

  • Output Voltage Indicators

    Setting voltage levels for optimum signal-to-noise performance can be a real pain - especially when you have to get out the old digital voltmeter and find a way to make those probes stay put while you try to read the dancing LCD display. With the Matrix Plus’s voltage indicator LED’s, you can say good-bye to that headache. Just turn the Matrix Plus gain control until your favorite light flickers and you’re done!

  • Selectable Ground Isolation

    Avoiding ground loops and grounding-related noises are of paramount importance in any installation. For this reason we have provided a flexible scheme of isolating signal grounds and power grounds.

  • Programmable Frequency Match (PFM) Subsonic Filter

    Many car audio systems truly push the limits of their subwoofer... without really knowing it. Tuned enclosures affect the roll-off of many speakers, yet lots of source material force the speakers to play lower than expected. The net result is wasted amplifier power and damaged speakers. The AudioControl PFM (Programmable Frequency Match) filter is a programmable subsonic filter. It allows you to only let the speaker play as low as it should be playing. Because every system is different, we allow you to change the PFM roll-off frequency to whatever you choose.

  • Remote Level Control (optional)

    You can purchase separately, the ACR-1 remote control to adjust volume output from the comfort of the driver’s seat.

Weitere Informationen
Technical data

Inputs

  • Preamp Inputs: 3 (6 channels)
  • Input Gain: 24dB
  • Input Impedance: 20kΩ

Outputs

  • Preamp Outputs: 3 (6 channels)
  • Maximum Output Level: 9.5Vrms
  • Output Gain: -12dB to +24dB
  • Output Impedance: 50Ω

Performance

  • Total Harmonic Distortion: 0.005%
  • Frequency Response: 10Hz-100kHz ±1dB
  • Signal to Noise: >110dB

Control

  • Remote In

General

  • Power Supply: Transformer Isolated PWM
  • Current Draw: 250mA
  • Recommended Fuse Rating: 1A

Weights & Dimensions

  • Dimensions: 15,7 x 22,1 x 3 cm
  • Weight: 1,0kg
Scope of delivery
  • AudioControl Matrix Plus
  • Power Connector
Brand AudioControl
Product Type Pre-amplifier
EAN 4047442070150
Schreiben Sie eine Bewertung
Nur registrierte Benutzer können Bewertungen schreiben. Bitte loggen Sie sich ein oder erstellen Sie ein Konto
Kataloge & Broschüren / Catalogues & Flyers

Customer Support
maxxcount.de GmbH & Co. KG
Gostritzer Straße 61-63
DE-01217 Dresden

Phone: +49 (0)351 871 8222
Fax: +49 (0)351 / 2145 12 16

You can reach us by phone:
Monday to Friday from 8 a.m. to 5 p.m.