Versandkosten: 4,99 €
They do not miss out on a necessary alarm system in their vehicle because of the complexity of the installation. The Ampire CAN bus alarms are sharpened through the vehicle CAN data bus and convenience electronics and supplied with all alarm specific information, whereby the installation costs are considerably cheaper compared to conventional systems.
In addition, the CAN bus alarms of Ampire the blinker and convenience closing automatically control on when it is supported by car. Because unlike most favorable CAN bus alarm systems on the market, Ampire CAN bus alarm systems not only read to the data bus information, but also write commands.
This CAN bus alarm systems are delivered without vehicle-specific firmware. Because the alarm systems can read and write on the data bus, the firmware is significantly more complex and must first be uploaded to the XKLOADER2 or XKLOADER3 programmer. We may like to play for free the appropriate firmware for you. When you place your order the exact vehicle type and Year of manufacture of. It is also important whether the vehicle is a Comfort Access (Smart Key) has. For more information and the latest firmware for your vehicle can be found at: www.directechs.com in English.
The Ampire CAN bus alarm system assures your vehicle over 6 separate alarm zones optimally. With the "NPC" Anti-false alarm feature individual zones are automatically disabled when a malfunction. The long-term memory allows you at any time to read the two alarm zones that triggered the last alarm.
Warnings by slight shocks (via the integrated shock sensor) or by the optional sensor are switched off not as an alarm zone.
This ultra-compact siren 514LN with ferrite magnet is the best and loudest siren in our program with 121dB SPL (measured at 1 meter distance). The siren has 6 different siren sounds are played back sequentially and change every 5 seconds. In addition, the volume of Sirenenchirpens when arming and disarming by the "soft chirp" function can be set. Factory alarm duration is set to 30 seconds and may be extended by the user to 60 seconds.
We recommend activating the siren sounds at Activation / deactivation (menu 1-2). This gives you as a user of the alarm system acoustic feedback on the status of the alarm system. Recorded information on the silent siren sounds (siren chirp) if the alarm has been sharpened correctly. An audible alarm (siren chirp) would etc. Report still an open door, manipulated alarm sensor immediately. However, this Sirenenchirpen is not permitted within the EU. The EU rules allow only a constant siren when erfolgtem slump of <30 seconds duration.
Web browser
Please use only Microsoft Internet Explorer 4.3 XpressVIP (ActiveX) software to the firmware on the CAN3901V aufzuspielen alarm. Other browsers are not supported automatically and could lead to errors.
installation
The optional 508A radar sensor can not be connected directly to the 4-pole sensor socket of CAN3901. The power consumption of 508A is it too high. Connect "sharpened mass when" the power lines of 508A directly to continuous positive and the output.
equipment
Depending on the vehicle model and equipment additional costs for installation, adaptations and data modules may arise if you want to control and remote start the vehicle.
Technical data |
|
---|---|
Scope of delivery |
|
Brand | AMPIRE |
Product Type | Alarm system |
EAN | 4260052633335 |
Compatible with: | Link Compatibility: https://pdf.ampire.de/ampire/CAN390X_Kompa.pdf Acura
Audi
BMW
Dodge
ford
Honda
Jeep
land Rover
Lincoln
Maserati
Mercedes Benz
Mini
Nissan
Pontiac
Porsche
Subaru
Toyota
VW
Volvo
|
---|