Versandkosten: 4,99 €
Our brake light cameras are vehicle-specific tailor-made solutions for the integration of a rear view camera. Due to the elegant integration via the exchange with the brake light, the camera on the vehicle is very inconspicuous. Due to its precise fit, it is securely and permanently installed there.
Due to the positioning instead of the brake light, the camera is far up and looks down at an angle. This allows you to see the entire relevant rear area of the vehicle when parking, turning or manoeuvring.
With the achieved protection class IP68 the camera is prepared for all environmental influences, i.e. protected against dust and water. Even temperatures from -30 to +70°C cannot damage the camera.
A 10 m connection cable is included in the scope of delivery with which you can easily master even long installation paths.
By the simple exchange of the factory brake light against our with integrated rear view camera the original appearance is hardly changed. The high-quality workmanship and materials ensure a long service life and reliable operation at all times. The installation is simple, fast and without drilling.
The curvature of the roof edge above the rear doors makes installation more difficult and thus severely restricts the rear visibility area. The integration into the brake light glass and the distance gained as a result allow a much better view of elements behind the vehicle.
The integrated camera module is already optimally installed in the angle in order to be able to see the field of vision behind the vehicle optimally. A wide-angle view of 140° is optimal for displaying the close range, so that the largest part behind the vehicle can be detected.
The video signal is transmitted via the supplied video connection cable and automatically displayed in the navigation system on a monitor, a retrofit navigation system (e.g. from Pioneer, Sony, Alpine, Kenwood, etc.) or via the rear view camera interface (optional) directly on the factory navigation system when reverse gear is engaged.
The number of TV lines determines the sharpness of the image and thus the resolution. The higher the resolution, the clearer and more detailed the camera image is displayed on the monitor.
With protection class IP68 the camera is well protected against environmental influences such as moisture and dust. The first digit shows the protection against foreign objects / contact, while the second digit refers to the water resistance.
The number of TV lines determines the sharpness of the image and thus the resolution. The higher the resolution, the clearer and more detailed the camera image is displayed on the monitor.
With protection class IP68 the camera is well protected against environmental influences such as moisture and dust. The first digit shows the protection against foreign objects / contact, while the second digit refers to the water resistance.
Not permitted within the scope of StVZO and ECE. The commissioning of these articles is not permitted in the area of the StVZO. Illustrated and listed articles serve only for show purposes and for the motor sport!
An increase in the vehicle dimensions, except for cars and motorcycles, is subject to registration and must be inspected immediately by the Technical Inspection Centre or an officially recognised inspection organisation (DEKRA, GTÜ, KÜS, TÜV). Before installation or modification, ask an officially recognised expert for motor vehicle traffic or a test engineer of a monitoring organisation whether the operating permit is impaired or whether the modification can be approved at all. The return of a used camera for crediting is excluded.
| Scope of delivery |
|
|---|---|
| Brand | AMPIRE |
| Product Type | Brake light camera |
| Integration | Car-specific |
| Mounting position | Brake lights |
| Picture sensor | Color sensor, 1/3" CMOS |
| Video norm | NTSC |
| Lens angle | 140° |
| Light sensitivity | 0 Lux (with IR ON) |
| Cam resolution | 756 x 504 px |
| color resolution | 480 TV lines |
| Mirroring function | Yes |
| Distance lines | No |
| Night vision function | Yes |
| Backlight Compensation | Automatic |
| White balance | Automatic |
| Protection class | IP68 |
| Color | black |
| max. Amperage | 200mA |
| Operating voltage | 12V |
| Operating temperature | -30°C - 70°C |
| EAN | 4047442089046 |
| Important notes | The red brake light glass in the illustration is for illustration purposes and is not included! |
|---|
