Versandkosten: 4,99 €
When you require total control and optimization to achieve great sound quality, AudioControl’s DM-810 Processor is the solution.
The powerful DM-810 processor allows users to truly optimize the performance of their audio system, regardless of whether they are using a factory or aftermarket source, and to truly achieve the goal of “Making Good Sound Great”.
These highly versatile Digital Signal processors are equipped with key features, such as active speaker level inputs, line-level and digital audio inputs, providing up to 10 channels of output. AudioControl’s “smart user” interface contains the power of AudioControl processing through a flexible PC interface packed full of features in a simple lay out. Configure signal summing, 30 bands of equalization, signal time-alignment, input delay and phase correction, plus AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM as well as integrated input and output RTA’s.
The built in Option Port on the DM-810 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions.
Designed to be the ultimate in sound quality and enhanced audio performance, the DM-810 is our latest AudioControl processor that sets a new standard for sound and what can be achieved in car audio systems.
The DM-810 features AudioControls MILCTM (Maximum Input Level Control) patent-pending source clip detection circuit. TM calculates when the waveform of an incoming audio signal is clipping, and if it is, the LED will fulfill its prime objective and shine forth, aiding in precise level matching control.
This is AudioControl’s patented bass restoration for factory head units.
The GTO or “Great Turn On” circuit automatically turns the unit on whenever it senses a signal on the channel 1 audio input. It enables the user to not have to run a remote trigger to the unit to turn the system on. You can still use the remote out on the unit when using the GTO.
The built in Option Port on the DM-810 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. Watch this space for future Option Port expansion options. For Example connect our new optional Bluetooth adapter, so you can stream audio into channels 7 and 8 from your Bluetooth-enabled devices. Further details will be available when this accessory and others become available.
Connect your laptop to the DM-810 using AudioControl’s DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity then precisely tune the DM-810 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals.With a clear GUI and intuitive workflow, AudioControl’s Smart User Interface will take the guesswork out of tuning your system to your exact specifications.
The speaker-level output from amplifiers and factory installed radios can connect here, so the DM-810 will receive the audio signals this way and do its thing. Make sure that you follow the plus and minus polarity markings on the DM-810 and match it to the polarity of the speaker wiring. Analog signal entering the DM-810 are the sum of the speaker-level inputs and the respective RCA Line-level inputs.
The line-level output from the head unit or factory-installed radios can connect here, so the DM-810 will receive the line-level audio signals. The inputs are 1-2 (stereo), 3-4 (stereo), 5 (mono), 6 (mono), and 7-8 (stereo). Note that inputs 7 and 8 will default to the digital inputs (3) if there is a digital input signal present. Inputs 1-2 have the GTO™ (great turn on) signal-sense circuit that will awaken the DM-810 when an analog input signal is present.
These S/PDIF and Toslink inputs allow you to connect the digital audio output from source units. These inputs share the use of inputs 7 and 8 as follows: If a digital signal is present, then input channels 7 and 8 receive the audio from the digital source. If there is no digital signal present, then inputs 7 and 8 are the sum of the speaker-level inputs 7 and 8, analog line-inputs 7 and 8, and any streaming audio coming in via Bluetooth connection on the Option Port.
These line-level analog outputs from the DM-810 connect to the line-level inputs of your power amplifiers and other equipment. The matrix capabilities of the DM-810 allow you to pick and choose the outputs from any combination of inputs, add crossovers and EQ as required.
The Remote Power Input connects to the 12V remote trigger output of some head units. When the head unit is turned on, then the DM-810 will turn on. Alternatively, you can use the GTO feature of the DM-810 so it will turn on when an audio signal is detected at the speaker-level or line-level inputs of channels 1-2.
The Remote Power Output connects to the 12V remote trigger input of other units and amplifiers down the line. When the head unit is turned on, then the DM-810 will turn on and this daisy-chain connection will allow other units in your system to turn on.
These LEDs illuminate when a maximum audio signal is present on any of the analog audio inputs / outputs.
This connects to the USB A port of your computer in order to use the control software to configure the DM-810.
This connects to the optional ACR-3 remote level control using a standard telephone cord and connectors.
The LC1i offers all of the features you'd expect in a high quality LOC without AccuBass or an ACR-1 dash mounted control knob port.
The LC2i Pro provides all the essential features needed when integrating aftermarket amplifiers with today's more complex factory sound systems.
The LC6i offers easy signal summing, 40 volts input handling and clean high to low level conversion.
When installing multi-channel amplifier systems into vehicles that will retain their factory radio, the LC6i offers a popular set of features to get the install done right and the vehicle sounding great... the first time.
The DQ-61 provides most of the popular features of a digital signal processor, but allows the installer to use traditional dials and switches instead of apps or software. With it's built-in EQ, time correction, signal summing, line driver, line output conversion and AccuBass features, the DQ-61 is an incredible value.
The LC8i offers 8 channels of easy signal summing, 40 volts input handling and clean high to low level conversion as well as an easy-to-use AUX input that can be controlled via the included ACR-2 dash mounted remote level control.
A digital signal processor is your solution. Our DM series (digital matrix) DSP's feature line output conversion, equalization, crossover, time alignment, signal summing, AccuBass and remote level control that can be assigned to any output. Our DM-Smart DSP app allows control of all features, runs on all popular platforms, and is among the easiest to use in the industry.
That's what makes the new LC-5.1300 an installer's dream. The combination of class-leading power levels, built-in line output converter with signal summing, flexible crossover section and unmatched warranty make the LC series of amplifiers like nothing else you've ever installed. This particular model boasts 1300 watts of RMS power and a streamlined interface for easier installation.
That's what the D series of amplifiers from AudioControl represent. If you're looking to install one amplifier that can truly "do it all", then the D-5.1300 is for you. With 1300 watts of RMS power, an onboard DSP, built-in LOC & signal summing, as well as a pair of RCA outputs from the DSP for future system expansion, there is truly nothing else quite like it.
| Technical data | Inputs
Outputs
Performance
Control
General
Weights & Dimensions
|
|---|---|
| Scope of delivery |
|
| Brand | AudioControl |
| Product Type | DSP |
| Inputs | 8x Analog |
| Outputs | 10x Analog |
| Remote control | via App |
| EAN | 4047442070242 |
