Powered by Smartsupp
Produktfinder Finde alles für Dein Fahrzeug

Wird geladen …

AudioControl LC2i PRO 2CH Line Out Converter with GTO™, AccuBASS® & Subwoofer Control incl. ACR-1 remote control

199,00 €
Incl. 19% VAT.
  • Two channels of Active speaker level inputs (Up to 400W RMS/Ch)
  • 9,5 volt preamp output w/ level matching controls
  • Fixed and variable outputs with discrete level controls
  • AccuBASS® equalization to correct bass roll-off in factory systems
  • Threshold and Boost controls for AccuBASSTM optimization
  • Selectable GTOTM Auto sensing turn-on circuit (no remote wire needed)
  • Compact chassis for quick unobtrusive installation
  • ACR-1 Remote Bass Level Control included
Bitte beachten Sie, dass der Versand nach Belgien, Luxemburg, Niederlande nicht möglich ist.
A21073
Delivery Time 1 - 4 Days*
Delivery Cost 6,49 € in Dtl.

Versandkosten: 4,99 €

AudioControl LC2i PRO 2CH Line Out Converter with GTO™, AccuBASS® & Subwoofer Control incl. ACR-1 remote control

The LC2i is a compact, two-channel processor with an active input circuit that enables speaker signals of up to 400 watts per channel to be received from factory-installed source devices or amplifiers. It converts them into high-quality preamplifier signals, which can then be forwarded to retrofit processors and / or amplifiers. Users can enjoy maximum sound quality while maintaining factory volume and steering wheel remote control.

Who will like the LC2i?

For everyone who does not want to do without their own dashboard, but wants a great sound.
Nowadays, automobile manufacturers integrate all possible comfort functions into the radio systems that consumers do not want to do without. In addition, they make the radio system an integral part of the dashboard and even integrate heating, air conditioning and other control functions. The LC2i allows the customer to improve the sound system without disrupting the factory features and functions.

Adding retrofit amplifiers and subwoofers to factory source devices is a breeze.
The LC2i runs after the factory amplifier so that it can be integrated into any factory system. With AudioControl's active balanced inputs you get a much better bass than with passive converters.

Factory system with bass reduction. Factory systems may not be able to produce the bass levels that most customers want.
To protect their speakers, more and more car manufacturers are removing the bass frequencies at higher volumes. The AccuBASS® EQ in the LC2i corrects this rolling so that you get full bass at all volumes.

Why do AudioControl Line Output Interface sound so good?

Passive high / low converters have been used for years, but they add distortion, reduce the signal and roll off the bass. In short ... they sound bad!

With AudioControl's active high impedance inputs you are in a completely different world. AudioControl's input stage results in a linear, flat frequency response, so you get a solid bass without the signal you get with these passive high / low converters.

The AudioControl LC2i is also an extremely low-distortion (typically <0.01%) 9.5 volt line driver and a line converter. You now have a sound quality that is just as good as that of a retrofit main unit, while maintaining the comfortable and optical properties of the factory-installed unit.

In short, the LC2i offers you the brilliant sound quality that AudioControl has been offering for over 33 years. Combine this with the AccuBASS® equalization discussed below and you get impressive performance from a factory system.

Overview of all features

  • AccuBASS® Processing

    Factory installed amplifiers and woofers are (unfortunately) not designed to reproduce bass at high volumes. Car manufacturers adapt to this by taking the bass out of the signal when you turn up the volume. AudioControl developed the patent pending AccuBASS™ circuit to restore bass. After a quick and easy one-time setting, the AccuBASS™ circuit takes over the bass just as the factory system rolls off. You get smooth, seamless, and rock solid bass response regardless of volume level.

  • GTO™ Signal Sense ("Great Turn On")

    Many cars can turn on the factory amplifier even if the source unit is off (Alarms, Cell phones, etc). To prevent this from turning your system on unexpectedly, you can bypass the GTO™ circuit by moving the GTO™ jumper, and using an applied 12-volts at the Remote In terminal. Using the jumper may result in some factory features not working fully.

  • Subwoofer remote control ACR-1

    With the retrofitting of powerful retrofit amplifiers and speakers, the need to have more control over your own system is increasing. With the included subwoofer remote control, you can add a control mounted on the dashboard to the LC2i PRO , with which you can conveniently adjust the level of a channel (usually a subwoofer). This allows you to balance the bass level with the rest of the system and increase or decrease it as needed.

  • ACCUBASS® STATUS LED

  • VARIABLE BASS OUTPUT (1 KHZ HP)

  • LOAD SELECT SWITCH

  • MAIN OUTPUT

  • MAXIMIZED LED

  • TRIGGER MODE SWITCH

FAQ

Does the LC2i need power?

Yes, the LC2i is an active line output converter and should be connected to the battery for constant 12 V and to the common ground for amplifiers and processors.

Do I have to find a remote-controlled switch-on line?

No, the LC2i has a GTO signal sampling, which switches the device on when it detects a signal at the input of your factory amplifier or main unit.

Audiocontrol - OEM Integration made simple

  • Perfect for adding a quick bass package.

    The LC1i offers all of the features you'd expect in a high quality LOC without AccuBass or an ACR-1 dash mounted control knob port.

  • The ultimate 2 channel line converter.

    The LC2i Pro provides all the essential features needed when integrating aftermarket amplifiers with today's more complex factory sound systems.

  • One of the simplest solutions for adding multiple amplifiers to a factory sound system.

    The LC6i offers easy signal summing, 40 volts input handling and clean high to low level conversion.

    When installing multi-channel amplifier systems into vehicles that will retain their factory radio, the LC6i offers a popular set of features to get the install done right and the vehicle sounding great... the first time.

  • Looking for DSP features, but aren't interested in software?

    The DQ-61 provides most of the popular features of a digital signal processor, but allows the installer to use traditional dials and switches instead of apps or software. With it's built-in EQ, time correction, signal summing, line driver, line output conversion and AccuBass features, the DQ-61 is an incredible value.

  • Need more inputs and outputs? Looking for the easiest way to add an AUX in?

    The LC8i offers 8 channels of easy signal summing, 40 volts input handling and clean high to low level conversion as well as an easy-to-use AUX input that can be controlled via the included ACR-2 dash mounted remote level control.

  • Want the ultimate in control and flexibility?

    A digital signal processor is your solution. Our DM series (digital matrix) DSP's feature line output conversion, equalization, crossover, time alignment, signal summing, AccuBass and remote level control that can be assigned to any output. Our DM-Smart DSP app allows control of all features, runs on all popular platforms, and is among the easiest to use in the industry.

Or simplify the installation even further by combining your amplifier and LOC or DSP all in one!

  • Power, precision, control, and convenience.

    That's what makes the new LC-5.1300 an installer's dream. The combination of class-leading power levels, built-in line output converter with signal summing, flexible crossover section and unmatched warranty make the LC series of amplifiers like nothing else you've ever installed. This particular model boasts 1300 watts of RMS power and a streamlined interface for easier installation.

  • Ultimate power + ultimate flexibility.

    That's what the D series of amplifiers from AudioControl represent. If you're looking to install one amplifier that can truly "do it all", then the D-5.1300 is for you. With 1300 watts of RMS power, an onboard DSP, built-in LOC & signal summing, as well as a pair of RCA outputs from the DSP for future system expansion, there is truly nothing else quite like it.

Weitere Informationen
Technical data

Inputs

  • Speaker inputs: 1 (2 channels)
  • Maximum speaker input power: 40Vrms / 400W per channel (20kΩ setting)
  • Input impedance (selectable): 20Ω, 60Ω, 20kΩ

Outputs

  • Preamp outputs: 2 (2 main channels, 2 bass channels)
  • Maximum output power: 9.5Vrms / 13V maximum
  • Output gain: +/- 12 dB
  • Output impedance: 150Ω

Performance

  • Total harmonic distortion (THD): 0.01%
  • S / N ratio:> 110dB
  • Frequency range: 10Hz-50kHz ± 1 dB

General

  • Power consumption: 200mA
  • Recommended fuse size: 1A

Weight & dimensions

  • Dimensions: 17.5 x 7.6 x 2.6 cm (including mounting bracket)
  • Weight: 0.34kg
Scope of delivery
  • AudioControl LC2i PRO
  • ACR-1 dash remote
  • Power and Speaker Connectors
Brand AudioControl
Product Type High-Low Adapter
Eingangs-Kanäle 2
Ausgangs-Kanäle 4
Vorverstärker-Leistung 9,5Vrms
Color black
EAN 4047442092039
Schreiben Sie eine Bewertung
Nur registrierte Benutzer können Bewertungen schreiben. Bitte loggen Sie sich ein oder erstellen Sie ein Konto

Customer Support
maxxcount.de GmbH & Co. KG
Gostritzer Straße 61-63
DE-01217 Dresden

Phone: +49 (0)351 871 8222
Fax: +49 (0)351 / 2145 12 16

You can reach us by phone:
Monday to Friday from 8 a.m. to 5 p.m.
Diese Artikel könnten Ihnen eventuell auch gefallen!