Voltage Stabilizer for Start-Stop Vehicles (Quadlock-ISO)

Voltage Stabilizer for Start-Stop Vehicles (Quadlock-ISO)

Vehicle manufacturers often use special radio connector and factory radio with special connections. If you now want to install a universal radio, they fit each other rarely. tailored to the respective vehicle radio adapter cable, partly universal radio adapter, this provide a satisfactory solution to adapt.

This adapter is required to an aftermarket radio with ISO connecting terminals in the vehicle or to produce the correct polarity of the power supply.

Start / Stop without problems

Not enough power?

Many vehicles need to start the engine so much electricity that devices such as the car radio during the starting phase of the system will weggechaltet or gets too little voltage. Whether or Moniceiver Naviceiver, the units shut down at short notice and have after the vehicle running again, re-boot. may take a process of up to 90 seconds!

Just a built-up in the new vehicles "start-stop" technique vermießt one so the car audio enjoyment! Particularly unfortunate if one has yet to buy a new aftermarket device only.

Our Radio cable with start-stop module provides the necessary power!

The adapter prevents the shutdown of aftermarket radios when starting the vehicle, eg when traffic lights stop.

• Especially suitable for vehicles with start-stop system.
• The module constantly supplies 12V voltage to the radio
• All settings selected in Radio retained after starting
• Delayed power failure
• Ensures voltage stability: interesting for vehicles with power fluctuations