Customer Hotline
+49 (0)351 871 8222
Einkaufsoptionen
What is the CAN bus?
Today's radio or navigation systems not only play back the music of the radio or navigation commands, but are also deeply networked with the vehicle's electronics. This communication structure, called CAN-Bus, connects ECUs, sensors, multimedia devices and much more.
Therefore, when replacing the factory radios / notifications, a vehicle-specific CAN bus adapter is required to maintain / keep the communication of all devices integrated in the CAN bus intact.
What can the CAN bus adapter do?
These active radio adapters are required in vehicles with CAN bus (also known as "GM Databus", "GMLan" or "LAN bus" for general engines) to exchange the standard radio or navigation system for an aftermarket device.
The adapters read the CAN bus, generate all required signals and control the original sound system with the audio signal of the new radio / navigation system. They are also required in many vehicles to connect the steering wheel remote control.
» Radio / Navi retrofit simple and fast: PAC RadioPRO 3 / 4 / 5 Serie
- 599,00 €Incl. 19% VAT.
Axxes AXDIS-LR82 CAN-BUS Interface set including SWC Interface for Land Rover Range Rover Vogue 2006-2012 (MOST 25 amplifier)- Allows the factory radio to be exchanged and the functions of the original steering wheel remote control to be retained
- Steering wheel remote control adapter already integrated in the interface
- For Land Rover Range Rover Vogue with amplifier
- Includes audio controls on the steering wheel
- Provides the following signals: speed signal, handbrake signal, reversing signal,
599,00 €Incl. 19% VAT.Delivery Cost in Dtl.A21715Delivery Time 8 - 11 Days* - 319,00 €Incl. 19% VAT.
Axxess AX-JP901 CAN-BUS Interface set including SWC Interface for Jeep Renegade from 2015- Enables replacement of factory radio & preserves functions of original steering wheel remote control
- Steering wheel remote control adapter already integrated in the interface
- For non-amplified Jeep Renegade
- Retains Balance and Fading
- Retains audio controls on the steering wheel
- Retains parking sensor chimes
- Retains most of the vehicle settings that was displayed on the factory radio1
- Provides the following signals: speed signal, handbrake signal, reversing signal
319,00 €Incl. 19% VAT.Delivery Cost in Dtl.A21173Delivery Time 11 - 14 Days* - 319,00 €Incl. 19% VAT.
PAC RP5-GM41 CAN-BUS Adapter Set for Chevrolet Sonic & Spark (from 2012)- Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control.
- Steering wheel remote control in the interface already integrated.
- Controls (if available) to the car's amp via CAN bus
- In addition to ignition plus with RAP (delayed disconnection) The following signals
- Speed signal,
- Hand brake signal,
- Reversing signal,
- instrument lighting
319,00 €Incl. 19% VAT.Delivery Cost in Dtl.A17058Delivery Time 8 - 11 Days* - 299,00 €Incl. 19% VAT.
Axxess AX-FT901 CAN-BUS Interface set including SWC Interface for Fiat 500 / 500L with U-Connect- Allows the factory radio to be exchanged and the functions of the original steering wheel remote control to be retained
- Steering wheel remote control adapter already integrated in the interface
- For Fiat 500 / 500L with U-Connect (non-amplified)
- Balance and fading are retained
- Includes audio controls on the steering wheel
- Receives parking sensor warning tones
- Preserves most of the vehicle settings that were displayed on the factory radio 1
- Provides the following signals: speed signal, handbrake signal, reversing signal,
299,00 €Incl. 19% VAT.Delivery Cost in Dtl.A21275Delivery Time 11 - 14 Days* - 299,00 €Incl. 19% VAT.
Axxess AX-FT902 CAN-BUS Interface set including SWC Interface for Fiat 500X with U-Connect- Allows the factory radio to be exchanged and the functions of the original steering wheel remote control to be retained
- Steering wheel remote control adapter already integrated in the interface
- For Fiat 500X with U-Connect (non-amplified)
- Balance and fading are retained
- Includes audio controls on the steering wheel
- Receives parking sensor warning tones
- Preserves most of the vehicle settings that were displayed on the factory radio 1
- Provides the following signals: speed signal, handbrake signal, reversing signal,
299,00 €Incl. 19% VAT.Delivery Cost in Dtl.A21276Delivery Time 11 - 14 Days* - 279,00 €Incl. 19% VAT.
Axxess AXDIS-GMLN11 CAN-BUS Interface set incl. SWC for Chevrolet, Opel, Pontiac, Saturn 2006-2011- Allows you to swap the factory radio and preserve the functions of the original steering wheel remote control
- Steering wheel remote control adapter already integrated in the interface
- Includes Factory AUX, Factory Bluetooth & OnStar
- Balance and fading are maintained (for vehicles with / without amplifier)
- Provides the following signals in addition to ignition plus with RAP (delayed switch-off)
- Speed signal,
- Hand brake signal,
- Reversing signal
279,00 €Incl. 19% VAT.Delivery Cost in Dtl.A20328Delivery Time 11 - 14 Days* - 279,00 €Incl. 19% VAT.
Axxes AX-TYAMP2-SWC CAN-Bus Adapter (Amplifier + SWC) for Toyota 2012+- Necessary when replacing the factory radio / navigation device with a retrofit radio / navigation device
- Especially for selected Toyota 2012 up
- Keeps the CAN data bus communication intact
- Retains audio controls on the steering wheel
- Retains the factory AUX-IN jack
- Retains balance
- Always "up-to-date": software updates via micro-B USB port
279,00 €Incl. 19% VAT.Delivery Cost in Dtl.A20532Delivery Time 8 - 11 Days* - 279,00 €Incl. 19% VAT.
Axxess AXDIS-CH13 CAN bus Interface Kit incl. SWC Interface for Chrysler, Dodge , Jeep- Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control
- integrated steering wheel remote control in Interface
- Retains balance and fade (non-amplified models only)
- Controls (if available) to the car's preamp via CAN bus
- Situated beside ignition positive with RAP (delayed disconnection) The following signals
- Speed signal,
- Hand brake signal,
- Reversing signal,
279,00 €Incl. 19% VAT.Delivery Cost in Dtl.A17858Delivery Time 1 - 4 Days* - 279,00 €Incl. 19% VAT.
Axxess AX-HYKIA2-SWC CAN bus Adapter for Hyundai Veloster from 2012- Allows simple exchanging the factory radio / -navis against an aftermarket device
- Provides required when retrofitting data (eg Ignition, speedometer and reverse signal, gain control)
- replaced the original Blue Link system
- Designed for amplified (Requires the AX-HYKIA-SPDIF) and non-amplified models
279,00 €Incl. 19% VAT.Delivery Cost in Dtl.A17254Delivery Time 15 - 18 Days* - 279,00 €Incl. 19% VAT.
Axxess AXDIS-FD2 CANBus Interface for Ford (from 2011) with ACC & NAV- Necessary when replacing the factory radio / -Navi against an aftermarket radio / navigation system
- Especially for selected Ford vehicles with ACC + NAV
- Does the CAN databus communication intact
- Receives audio operation of the steering wheel remote control
- Provides the following amplifier functions still available:
- High-level speaker input
- Plug & Play installation
- Always "up-to-date": software updates via micro-B USB Port
279,00 €Incl. 19% VAT.Delivery Cost in Dtl.A17676Delivery Time 8 - 11 Days*
