Powered by Smartsupp
Produktfinder Finde alles für Dein Fahrzeug

Wird geladen …
Einkaufsoptionen
CAN Bus Adapter - Mitsubishi

What is the CAN bus?

Today's radio or navigation systems not only play back the music of the radio or navigation commands, but are also deeply networked with the vehicle's electronics. This communication structure, called CAN-Bus, connects ECUs, sensors, multimedia devices and much more.

Therefore, when replacing the factory radios / notifications, a vehicle-specific CAN bus adapter is required to maintain / keep the communication of all devices integrated in the CAN bus intact.

What can the CAN bus adapter do?

These active radio adapters are required in vehicles with CAN bus (also known as "GM Databus", "GMLan" or "LAN bus" for general engines) to exchange the standard radio or navigation system for an aftermarket device.

The adapters read the CAN bus, generate all required signals and control the original sound system with the audio signal of the new radio / navigation system. They are also required in many vehicles to connect the steering wheel remote control.

» Radio / Navi retrofit simple and fast: PAC RadioPRO 3 / 4 / 5 Serie

Aufsteigend sortieren
Anzeigen als Liste Liste

8 Elemente

pro Seite
  1. 279,00 €
    Incl. 19% VAT.
    Axxess AXDIS-CH13 CAN bus Interface Kit incl. SWC Interface for Chrysler, Dodge , Jeep
    • Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control
    • integrated steering wheel remote control in Interface
    • Retains balance and fade (non-amplified models only)
    • Controls (if available) to the car's preamp via CAN bus
    • Situated beside ignition positive with RAP (delayed disconnection) The following signals
      • Speed ​​signal,
      • Hand brake signal,
      • Reversing signal,
      to disposal!
    279,00 €
    Incl. 19% VAT.
    Delivery Cost in Dtl.
    Delivery Time 1 - 4 Days*
    A17858
  2. 229,00 €
    Incl. 19% VAT.
    Axxess AXTO-MI2 CAN-BUS Adapter for Mitsubishi 2007-2013 with Rockford Fosgate Amp
    • Allows simple exchanging the factory radio / -navis against an aftermarket device
    • Provides required when retrofitting data (eg Ignition, speedometer and reverse signal, gain control)
    229,00 €
    Incl. 19% VAT.
    Delivery Cost in Dtl.
    Delivery Time 11 - 14 Days*
    A16212
  3. 229,00 €
    Incl. 19% VAT.
    PAC RP4-CH11 CAN-BUS Adapter Set (C2R-CHY4 + SWI-RC) for Chrysler, Dodge & Jeep with amplifier
    • Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control.
    • Steering wheel remote control in the interface already integrated.
    • Controls (if available) to the car's amp via CAN bus
    • Controls (if present) the on-board video entertainment system
    • Balance and fading are maintained (only for vehicles without amplifier!)
    • Situated beside ignition positive with RAP (delayed disconnection) The following signals
      • Speed ​​signal,
      • Hand brake signal,
      • Reversing signal,
      • instrument lighting
      to disposal!
    229,00 €
    Incl. 19% VAT.
    Delivery Cost in Dtl.
    Delivery Time 1 - 4 Days*
    A16552
  4. 209,00 €
    Incl. 19% VAT.
    Axxess AXTO-MI3 CAN-BUS Adapter for Mitsubishi from 2014 with Rockford Fosgate Amp
    • Necessary when replacing the factory radio from an aftermarket radio / navigation system
    • Easy installation thanks to pre-assembled cable set
    • Especially for vehicles with Rockford Fosgate Amp
    • Does the CAN databus communication intact
    • Provides amplifier functions still available:
      • High-level speaker input
      • Adjusting the fader
      • Balance adjustment
    • Incl. Pre-wiring for optional steering wheel remote control adapter ASWC-1
    • Adapter always "up-to-date" on micro-B USB Port
    209,00 €
    Incl. 19% VAT.
    Delivery Cost in Dtl.
    Delivery Time 8 - 11 Days*
    A17240
  5. Regulärer Preis 229,00 € Sonderpreis 171,75 €
    Incl. 19% VAT.
    Axxess AXTO-MI1 CAN-BUS Interface for Mitsubishi from 2006 to 2012 with original amplifier
    -25%
    Axxess AXTO-MI1 CAN-BUS Interface for Mitsubishi from 2006 to 2012 with original amplifier
    • Necessary when replacing the factory radio against a retrofit radio / navi
    • Easy installation thanks to pre-assembled cable set
    • Especially for vehicles with original factory amplifiers
    • Keeps CAN data bus communication intact
    • Continues to provide amplifier functions:
      • Adjusting the fader
      • Balance adjustment
    • Eliminates "COM ERROR" message
    Regulärer Preis 229,00 € Sonderpreis 171,75 €
    Incl. 19% VAT.
    Delivery Cost 6,49 € in Dtl.
    Delivery Time 1 - 4 Days*
    A18143
  6. 159,00 €
    Incl. 19% VAT.
    PAC C2R-CHY4 CAN-BUS Adapter for Chrysler, Dodge & Jeep with amplifier
    • Necessary when replacing the factory radio from an aftermarket radio / navigation system
    • Holds a complete CAN bus communication intact
      (optimally at workshop service or emission inspection)
    • Integrated connection for steering remote control modules PAC SWI
    • Situated beside ignition positive following CAN bus signals are available:
      • Reversing signal
      • Hand / parking brake signal
      • speed
      • lighting
      • Accessories Power Reserve / prolonged power (RAP)
      • Station amplifier signal
    159,00 €
    Incl. 19% VAT.
    Delivery Cost in Dtl.
    Delivery Time 1 - 4 Days*
    A14408
  7. 34,90 €
    Incl. 19% VAT.
    PAC C2R-WITH CAN-BUS Adapter for Dodge & Mitsubishi (1991-2005)
    • Necessary when replacing the factory radio from an aftermarket radio / navigation system
    • Holds a complete CAN bus communication intact
    • Komptaibel with Infinity sound / amplifier systems
    • Situated beside ignition positive following CAN bus signals are available:
      • Station amplifier signal
    34,90 €
    Incl. 19% VAT.
    Delivery Cost in Dtl.
    Delivery Time 6 - 9 Days*
    A15547
  8. 9,99 €
    Incl. 19% VAT.
    Universal cable set for CAN bus interfaces CX-200/301/400/401
    • Universal cable set for CX-400 or CX-401
    • Suitable for BMW, Chevrolet, Chrysler, Jeep , Land Rover, Lexus, Mazda, Mercedes, Mitsubishi, Opel, Volvo
    • The following CAN bus signals are converted
      • ignition
      • light
      • Reverse gear
      • speed
    9,99 €
    Incl. 19% VAT.
    Delivery Cost 6,49 € in Dtl.
    Delivery Time 6 - 9 Days*
    A21145
Aufsteigend sortieren
Anzeigen als Liste Liste

8 Elemente

pro Seite