Stinger SPX1000X5 5 Channel Marine Amplifier 1000W Class D
The Stinger SPX1000X5 Bluetooth amplifier is the compact power pack for your soundtrack during outdoor activities with the best sound quality.
The versatile 1000W amplifier delivers tremendous performance with minimum size and heat generation, so that it can be hidden in the smallest places.
Are you always on the move and don't want to do without your music in the best sound quality? Then we will show you a few application examples here where the SPX1000X5 can be optimally used.
"Marine": Use on yacht & boat
Due to the protective lacquered printed circuit boards, the protection against all-round splash water (IPX4) and jet water (IPX5), the SPX1000X5 fits SPX1000X5 on SPX1000X5 & boats. So sound on and at high speed in the best weather, jet over the water or simply accompany the sun on the deck with a few relaxed or rhythmic summer sounds.
"Offroad": Powersport with buggy, quad and other off-road vehicles (ATV / UTV / SxS)
But not only on the water but also off-road, the solid housing provides the best protection for its high-quality components. The amplifier is therefore also suitable for vehicles in extreme use such as buggies, quad bikes or other ATVs ("All Terrain Vehicles"), UTVs ("Utility Task Vehicles"), SxS vehicles (side-by-side). Nothing stands in the way of the ultimate ride through uneven terrain, the desert or mountains with a brilliant sound.
"On the road": Use in cars and motorbikes
In addition to use on the water or off-road, the SPX1000X5 course also be installed in the car or even in the motorcycle. Thanks to the compact dimensions, every biker can now look forward to more sound power on their next ride.
Services at a glance
RMS output power at 14.4V & <1% THD
1 Ω
-
2 Ω
4x 150W + 1x 500W
4 Ω
4x 95W + 1x 275W
Overview of all features
Highly efficient full range class-D chipset
All channels are in excellent full-range Class-D topology with a particularly efficient Class-D chipset for outstanding 80% efficiency. The tiny but very powerful power amplifier therefore consumes significantly less power than conventional Class A / B amplifiers.
Powerful unregulated power supply
The legendary unregulated Phoenix Gold power supplies ensure solid 4 to 2 ohm stability.
12dB high / low pass crossovers
All crossovers of the SPX1000X5 are equipped with high-quality potentiometers and enable reliable frequency adjustment.
Music playback via Aux-in ( RCA ) or optional: Bluetooth audio streaming (A2DP)
The separately available Bluetooth module (ISBT23) enables comfortable wireless playback of your favorite songs from your smartphone, iPod & iPad in excellent sound quality. Connection via a wired AUX-In ( RCA ) is also possible. If you want to connect a device with a 3.5mm jack, we recommend our jack RCA Y- Interface from our accessories.
Perfect for marine & power sports
The amplifier is specially designed for marine and powersport applications due to its compact design & weatherproof housing (IPX-4/5).
No matter if "offshore" at full speed over the water or "offroad" with a quad or buggy through the terrain, the SPX1000X5 despite every challenge. Due to its minimal dimensions, it can be found just as well in motorcycles and of course in every car.
This is how your soundtrack in Top Performence runs to go with the trip or adventure.
IPX-4/5 Weatherproof housing
All components are protected from the weather and splash water by the IPX-4/5 housing.
Protective coated printed circuit boards
The amplifier board is coated with a special protective varnish for optimal protection and maximum service life. (Symbolic illustration)
Automatic detection of connected devices
When playing the songs via Bluetooth or RCA cable, the amplifier is woken from standby and you can directly send the music to the loudspeakers and play them back without the need for a radio. The music playback is then controlled very conveniently, for example using a cell phone.
AUX output (to use additional amplifiers)
Ideal for connecting to other amplifiers. Supports the full signal bandwidth, so there is no signal loss when using this output.
Die-cast connection terminal
Solid connection block for up to 10mm² power and ground cables supply the amplifiers with the required current without contact resistance. The + 12V terminal is connected directly to the battery using a 10mm² cable - a fuse of max. 40cm after the battery terminal is mandatory. The remote input is controlled by the switched + 12V of the head unit and GROUND is best connected to a central, well-conductive ground point on the body.
Our connection recommendation
Due to the current levels that occur, the following configuration is recommended for the SPX amplifier: - Current: 8 gauge (10mm²) - Fuse: 80A
For the best possible sound quality, we recommend premium amplifier connection cable sets from the Stinger brand - suitable for this amplifier, for example the Stinger SK4281, which you can also find in our accessories.
Cable remote control included
The SPX1000X5 is supplied with the RBCF remote control for the subwoofer level, which can be optimally installed and installed in the desired position in the car. With the remote control, the bass level can be changed by up to 20dB, for example to give the favorite song the appropriate kick.
Hand-signed birth certificate with actually measured performance
Every Phoenix Gold amplifier receives a birth certificate with the actual measured performance data before leaving the factory. With the SX series, this can be up to 5% higher than the RMS power specified in the brochure. Power measurements at Phoenix Gold always take place at 14.4V & <1% THD.