PAC C2R-GM11 CAN-BUS Adapter for General Motors (11Bit LAN) without OnStar®

PAC C2R-GM11 CAN-BUS Adapter for General Motors (11Bit LAN) without OnStar®

use functions of the factory radio / navigation system with its own radios / navigation

The PAC C2R-GM11 CAN bus adapter is required to play in certain brand vehicles Chevrolet, Pontiac, Saturn the original factory radio or navigation system with an aftermarket radio, for example, of Alpine , JVC, Kenwood, Pioneer, Sony, etc. replace.

Obtaining the following CAN-Bus features

This PAC C2R-GM11 CAN-bus adapter controls at a radio / navigation system retrofit, if any, the vehicle's own preamp via CAN bus and provides the following signals in addition to ignition plus available:

• Receipt of all warning tones
• with sound system / amplifier switching
• Supports 10 min. Extended power (RAP)
• Preparation for steering remote control module
• Compatible with all audio systems

To continue to use the functions of the factory steering wheel remote control, you also need the appropriate SWI-steering remote control module (eg PAC SWI-JACK, SWI-PS, SWI-X, SWI-RC).

It can therefore be your new car radio, your AV Tuner, AppRadio or navigation system perfectly integrated into the vehicle.

Why the CAN bus adapter?

Today's radio or navigation systems provide not only the music of the radio or navigation instructions again but are deeply linked with the vehicle electronics. This communication structure, called CAN bus, connects control units, sensors, multimedia devices, and more with each other.

Therefore, to keep the communication between all integrated into the CAN bus devices upright / intact when replacing the factory radio / -navis a vehicle-specific CAN bus adapter is required.

Retained Accessory Power (RAP)
In this country, "Accessories Power Reserve" or "prolonged power" called. Used for maintenance of various functions in the vehicle, even after switching off the ignition for a specified period.