PAC SWI-X steering wheel-FB Adapter Universal

SWI-X Universal steering wheel remote control

The SWI-X is a universal steering wheel remote control adapter for aftermarket radios. If the original factory radio is replaced by a radio of another brand, this adapter is required to obtain the functions of the steering wheel remote control. The adapter is universally programmable for all car radios with of pre-loaded steering remote control.

The SWI-X is compatible with 95% of the built vehicles since 1986 - so you only need an adapter and saves costs when switching to another vehicle.

Please check with reference to the information of the manufacturer , if there is a matching steering wheel remote control for your to-install replacement radio.

Please check then if your vehicle on the compatibility list can be found. If you can not find your vehicle, please contact us via email: Request to Support .

Some vehicles will need a CAN-BUS adapter to the signals from the steering wheel remote control to implement. Whether you need a CAN-BUS adapter SWI-CAN to install the steering wheel remote control adapter and how the installation is carried out, can be found here: SWI-CAN and installation .

Only if your vehicle is recorded in the list on page 1 of this SWI-CAN instructions, you will need this adapter.

After successful installation, the steering wheel remote control must be programmed. Manufacturers shall keep the necessary information on its website for you. After selecting the vehicle and the adapter used, you can get detailed information about the procedure for programming .