Powered by Smartsupp
Produktfinder Finde alles für Dein Fahrzeug

Wird geladen …

maxxcount Sound Pack 6FR suitable for Harley-Davidson® Street Glide™

Regulärer Preis 2.100,00 € Sonderpreis 1.849,00 €
Incl. 19% VAT.
  • Plug & Play sound system with 4 front speakers + 2 speakers in saddlebag
  • Suitable for Harley-Davidson® Street Glide™ 2014+ models
  • Front 1+2: Fairing 16.5cm weatherproof coax set with 100W RMS / 200W Max.
  • Saddlebag: 6x9 inch weatherproof coax set with 130W RMS / 260W Max.
  • Amplifier: 800W 4-channel mini power amp
  • Incl. complete installation & insulation material
  • Easy installation thanks to Plug&Play cables
A22806
Delivery Time 11 - 14 Days*
Delivery Cost in Dtl.

Versandkosten: 4,99 €

maxxcount Sound Pack 6FR suitable for Harley-Davidson® Street Glide™

Are you looking for a sound upgrade for your touring bike and are both an extra portion of bass and an outstanding price/performance ratio important to you? Then it's definitely worth taking a look at the maxxcount SoundPacks suitable for Harley-Davidson®!

We looked at and, above all, listened to the various versions of the systems on the market and were sure that there was still more to be done!

Together with our partners and BIKE specialists in the USA, we then selected particularly reliable components that are especially suitable in terms of sound for optimum bass reproduction and combined them with as many plug & play parts as possible in our maxxcount soundpacks in various stages of expansion.

 

 

So you can be sure - no matter whether you decide on a maxxcount sound pack with 2 / 4 / 6 speakers or a subwoofer setup - you will always get a kit with above-average rich and fat sounding and especially proven components!

All maxxcount sound packs come with plug & play cable sets and installation accessories, so nothing is "fiddled" with the original wiring harness. Instead, everything can be professionally installed with weatherproof plugs and cables - and, of course, dismantled without a trace. Brackets are also supplied for mounting the amplifiers, which can be perfectly fitted to existing mounting points.

 

 

Our Soundpacks are available in 2 versions - a version with speakers that fit directly into the original speaker housings and our MOD version, which requires slight modifications for particularly bass-strong speakers (with a larger magnet). However, the feedback from our customers is absolutely clear here - the great sound is definitely worth the manageable extra effort!

If you want to get the best sound out of your system, we recommend using one of the optionally available Digital Sound Processors (DSP). This allows you to tune the sound of your bike to absolute perfection.

 

 

For example, high-pass filters (how low should the loudspeaker play) for the 16.5 cm and 6x9 loudspeakers can be set with absolute precision, frequency holes can be detected & unwanted "loud" frequency ranges can be effectively reduced to create an ideal overall sound. In addition, the DSP offers the possibility to switch back and forth between several individually configured sound setups (e.g. show / city / motorway) via the app.

If you have any questions about the SoundUpgrade for your bike or about the maxxcount SoundPacks, we are always there for you - just [email protected] or +49 351 8718235 !

 

Scope of delivery maxxcount Sound Pack 6FR suitable for Harley-Davidson® Street Glide™

  • Plug & Play sound system with 6 speakers (4x front + 2x rear)
  • Front Upper & Lower Fairings: 4x 16.5cm Hertz SX 165 NEO 100W RMS / 250W Max.
  • Rear Saddlebag: 2x 6x9 inch Hertz SX 690 NEO 130W/260W
  • Amplifier: Soundigital EVOX2 800.4 (4x147W@4Ohm / 4x223W@2Ohm / 2x446W@4Ohm)
  • Incl. Cut Kit & complete installation & insulation material
  • Easy installation thanks to Plug&Play cables

Attention:
On all Harley-Davidson® from 2014 onwards, the factory radio must be flashed before installing a maxxcount Sound Pack to prevent damage to the speakers!

Why do Harley-Davidson® from 2014 have to be flashed before an amplifier is retrofitted?

1. PROBLEM:

The 2014 Harley-Davidson® OEM factory radios use a "high fidelity" EQ curve that provides a powerful sound on low-power systems (the red curve in the picture below). However, when retrofitted with an external amplifier, this curve over-amplifies bass and treble, causing significant distortion at higher levels and speaker damage.



2. SOLUTION:

Reset the factory EQ curve to a neutral (flat) EQ curve (see green line above) by "flashing" the Harley-Davidson® radio so that the downstream DSP or amplifier gets a neutral input signal and the connected speakers are not damaged. This is the simplest and cheapest method to solve the problem. The "flash" method is also the acoustically optimal solution as it preserves signal integrity and thus provides maximum dynamic range and voltage potential from the source device for optimal sound quality.
Please do not use a line leveler to lower the EQ curve, as this will cut all frequencies sharply above 200Hz, thereby clipping a large part of the bass range!

3. How to flash the Harley-Davidson® Radios 2014+?

To flash the Harley-Davidson® radio you need special programming tools such as Diag4Bike or the kit from TechnoResearch.
However, if you own an older generation radio (all devices without touchscreen such as the 4.3" device with 11 buttons or the 6.5" GT radio with 4 buttons) and have always flirted with the latest Apple Carplay or Android Auto functions, you might consider a cutting-edge 7" touchscreen radio with all functions such as the SoundStream HDHU14+ (our item number: A22360) might be an option - it doesn't need to be flashed anymore ;-)

4. How to get the programming tools?

4.1. If you buy a BIKE kit from us, we will provide you with our TechnoResearch kit free of charge and on loan for 10 days at the installation date.
4.2. If you don't have the confidence to do this, you can of course ask the Harley-Davidson® specialist of your choice if he is able to flash the EQ of the radio.
4.3. If you have any questions about flashing, please contact us.
Weitere Informationen
Scope of delivery

2x coax set Hertz SX 165 NEO
Amplifier SoundDigital 800.4 EvoX (4Ω)
Bracket Metra BC-AMP06

Coax set Hertz SX 690 NEO
Insulation Stinger RKU
Complete cable set

Brand maxxcount Bike Sound Systems
Product Type Speaker Set
Speaker Size 16,5 cm
Color black
Year of manufacture 2014+
Motor bike type für H-D® Street Glide™
EAN 4047442099397
Schreiben Sie eine Bewertung
Nur registrierte Benutzer können Bewertungen schreiben. Bitte loggen Sie sich ein oder erstellen Sie ein Konto
Compatible with:

Suitable for Harley-Davidson® Street Glide™ 2014+

Customer Support
maxxcount.de GmbH & Co. KG
Gostritzer Straße 61-63
DE-01217 Dresden

Phone: +49 (0)351 871 8222
Fax: +49 (0)351 / 2145 12 16

You can reach us by phone:
Monday to Friday from 8 a.m. to 5 p.m.