Powered by Smartsupp
Produktfinder Finde alles für Dein Fahrzeug

Wird geladen …
Rear view camera in the handle bar for VW Caddy 5 (from 2020) & Ford Tourneo Connect (from 2021) with tailgate
Rear view camera in the handle bar for VW Caddy 5 (from 2020) & Ford Tourneo Connect (from 2021) with tailgate Rear view camera in the handle bar for VW Caddy 5 (from 2020) & Ford Tourneo Connect (from 2021) with tailgate

Rear view camera in the handle bar for VW Caddy 5 (from 2020) & Ford Tourneo Connect (from 2021) with tailgate

249,00 €
Incl. 19% VAT. , excl. Shipping Cost
  • Extended field of vision behind the vehicle for more safety and comfort
  • Installation of the camera at the rear is optically discreet and very inconspicuous
  • Can be used with all monitors that have an RCA video input
  • Perfect orientation thanks to the distance line display
  • Modular Plug & Play solution - can be removed without leaving marks
A24442
Delivery Time 1 - 4 Days*
Delivery Cost in Dtl.

Versandkosten: 4,99 €

Rear view camera in the handle bar for VW Caddy 5 (from 2020) & Ford Tourneo Connect (from 2021) with tailgate

The optimal parking aid -
More safety & comfort for you & your vehicle

Our ingeniously easy-to-install rear view cameras can be easily retrofitted to many vehicle models by replacing the handle bar recess - there is no better way to install a retrofit camera.

This allows for a particularly unobtrusive installation and the original appearance of the vehicle is retained.

image display of the rear view camera

The video signal is transmitted via the included video connection cable and is automatically displayed in the navigation system when reverse gear is engaged on a monitor, an aftermarket navigation system (e.g. from Pioneer, Sony, Alpine, Kenwood, etc.) or via a rear view camera interface (optional) directly on the factory navigation system.

170° detection angle

The optics give you a horizontal wide-angle view of 170°, ideal for displaying the close area so that most of the area behind the vehicle can be captured.

distance line display on the monitor

The camera module can also display distance lines on the monitor. This makes it easier to estimate the distance to obstacles behind the vehicle.

power supply

The power supply is provided via the 12V connection of your car reversing light, so that the camera switches on automatically when you put the car into reverse.

Attention, please note:

  • Check dimensions
    Before purchasing, please check whether the size and mounting points of the rear view camera match those of your vehicle.
  • Avoid image disturbances with our signal filter (optional)
    Newer vehicles use a clocked (pulsating) voltage to power the vehicle's exterior lighting (tail light, brake light, etc.), which is unsuitable for image sensors / video electronics and results in functional or image disturbances.
    Therefore, please do not connect the connection cable for activating the reversing camera directly to the reversing light, but use our signal filter. You can find a suitable signal filter under accessories.
  • Playback on the factory navigation system via rear view camera interface ( optional )
    If you would like to conveniently display the image from the rear view camera on your existing monitor of your factory navigation system, you will also need a rear view camera interface.

Weitere Informationen
Technical data
  • Mini Ball Rear View Camera NTSC (black)
  • Incl. vehicle-specific housing for the position of the factory rear view camera above the license plate
  • System cable with through-feed, e.g. for reversing signal
  • Sensor type CMOS 1/4 inch NTSC HD low-light sensitive
  • 800 TV lines
  • light sensitivity 0.01 lux
  • aperture F1.2
  • Angle horizontal 168°, vertical 118°, diagonal 188°
  • Guide lines can be switched off
  • Width of the guide lines selectable between car or truck
  • protection class IP69K
  • Suitable for continuous operation (ACC)
  • Mini 4-pin 3V system cable set with pass-through (blue)
  • 8.70m total system cable length, consists of:
    • 0.30m cable from camera to 4-pin 3V socket (diameter 5mm)
    • 8.00m extension 4-pin 3V plug to 4-pin 3V socket
    • 0.40m adapter 4-pin 3V plug to RCA plug + power supply (open ends)
Scope of delivery
  • rear view camera
  • 6m connection cable
Brand maxxcount
Product Type Handle strips camera
Integration Car-specific
Mounting position handle bar
Picture sensor Color sensor, 1/4" CMOS
Video norm NTSC
Lens angle 170°
Light sensitivity 0 Lux (with IR ON)
Cam resolution 720 x 480 px
color resolution 800 TV lines
Mirroring function Yes
Distance lines Yes, Switchable
Night vision function No
Backlight Compensation Automatic
White balance Automatic
Protection class IP69K
Color black
Additional connection 1x
Operating voltage 12V
Cable length 8 m
EAN 4047442109270
Schreiben Sie eine Bewertung
Nur registrierte Benutzer können Bewertungen schreiben. Bitte loggen Sie sich ein oder erstellen Sie ein Konto
Kundenfragen
Keine Fragen
Haben Sie gefunden, wonach Sie gesucht haben?
Compatible with:
  • VWCaddy5 (SB) with tailgate from 2020
  • Ford Tourneo Connect with tailgate from 2021

Customer Support
maxxcount.de GmbH & Co. KG
Gostritzer Straße 61-63
DE-01217 Dresden

Phone: +49 (0)351 / 2145 12 12
Fax: +49 (0)351 / 2145 12 16

You can reach us by phone:
Monday to Friday from 8 a.m. to 5 p.m.