PAC VS41 4x video switch for switching reversing lights, front and side cameras for BCI, RP4.2-, or RP5.2- Interface

PAC VS41 4x video switch for switching reversing lights, front and side cameras for BCI, RP4.2-, or RP5.2- Interface

The PAC VS41 4x video switcher allows for convenient display of reversing lights, front and side camera in factory or aftermarket radios. PAC Interface of BCI, and RP4.2- RP5.2 series expand via Plug & Play connection particularly comfortable.

Automatic activation of front, side, and rear view camera

When reverse gear is engaged the BCI VS41 switches itself a rear view camera. On the front camera on the Interface once your vehicle is less than 11km / h. Once the direction indicators, the PAC BCI VS41 activates the corresponding side camera. Thereby, the lane change, the view in the blind spot and observe conditions such as bikes when turning right is significantly easier.

Simple Plug & Play installation

The PAC VS41 is sent directly to the PAC Interface joined the BCI, and RP4.2- RP5.2 series. The connectable up to 4 cameras (OEM or aftermarket) are integrated via RCA connector. Alternatively, the PAC VS41 also install manually via single trigger lines in the vehicle.

Integrated signal filters against image disturbance

Vehicles newer date use to power the vehicle exterior lighting (rear light, brake light etc) clocked a (pulsating) voltage, which is suitable for image sensors / video electronics and has functional or image disorders. The signal filter buffers accordingly, thus ensuring trouble-free image.