Versandkosten: 4,99 €
Our ingeniously easy to install reversing cameras can be easily retrofitted by replacing the grip tray on many vehicle models - perfect is a retrofit camera not to install.
This makes a particularly inconspicuous installation possible and the original appearance of the vehicle is retained.
The video signal is transmitted via the supplied video connection cable and thus to a monitor, a retrofit navigation system (eg from Pioneer, Sony, Alpine , Kenwood, etc.) or via rear view camera interface (optional) directly on the factory navigation system when inserting the Reverse automatically displayed in the navigation system.
The new guide lines make maneuvering and parking easier and safer. A sensor inside the camera recognizes the movement of the vehicle and accordingly displays suitable guide lines.
The optics give you a horizontal wide-angle view of 170 degrees, ideal for the representation of the near range, so that the largest part can be detected behind the vehicle.
Power is supplied through the 12V port of your car reversing lamp, so the camera automatically turns on when reverse gear is engaged.
Scope of delivery |
|
---|---|
Brand | maxxcount |
Product Type | Handle strips camera |
Integration | Car-specific |
Mounting position | handle bar |
Picture sensor | Color sensor, 1/4" CMOS |
Video norm | NTSC |
Lens angle | 170° |
Light sensitivity | 0,1 Lux |
Cam resolution | 510 x 496 px |
color resolution | 420 TV lines |
Mirroring function | Yes |
Distance lines | Yes, dynamic |
Night vision function | No |
Backlight Compensation | Automatic |
White balance | Automatic |
Protection class | IP68 |
Color | black |
Additional connection | 1x |
noise Ratio | >48db |
Features | Dynamic guide lines |
Operating voltage | 12V |
Operating temperature | -30°C - 70°C |
Dimensions | (W x D): 51 x 48mm |
EAN | 4047442081194 |
Compatible with: |
|
---|