Versandkosten: 4,99 €
Our genius easy-to-install reversing cameras can easily be retrofitted by replacing the handle grip on many vehicle models - a retrofit camera is not perfect to install.
This allows a particularly unobtrusive installation and the original appearance of the vehicle is retained.
The video signal is transmitted via the supplied video connection cable to a monitor, a retrofit navigation system (eg from Pioneer, Sony, Alpine , Kenwood, etc.) or via rear view camera interface (optional) directly on the factory navigation system The reverse is automatically displayed in the navigation system.
The optics provide you with a horizontal wide-angle view of 140 degrees, ideal for the representation of the near area, so that the largest part behind the vehicle can be detected.
Distance lines can also be displayed in the monitor via the camera module. This makes it easier to estimate the distance to obstacles behind the vehicle.
The power is supplied via the 12V connector of your car reversing lamp so that the camera automatically turns on when reverse is engaged.
Scope of delivery |
|
---|---|
Brand | maxxcount |
Product Type | Handle strips camera |
Integration | Car-specific |
Mounting position | handle bar |
Picture sensor | Color sensor, 1/4" CMOS |
Video norm | NTSC |
Lens angle | 140° |
Light sensitivity | 1 Lux |
Mirroring function | Yes |
Distance lines | Yes, Switchable |
Night vision function | No |
Backlight Compensation | Automatic |
White balance | Automatic |
Protection class | IP68 |
Color | black |
noise Ratio | >48db |
Operating voltage | 12V |
Dimensions | LxBxD: 128x53x77mm, installation opening LxB 100x42mm |
EAN | 4047442072840 |