Powered by Smartsupp
Produktfinder Finde alles für Dein Fahrzeug

Wird geladen …

3rd Brake Light Mount Rear View Camera with 10m Cable for Renault Master, Opel Movano, Nissan NV400 (from 2010)

169,00 €
Incl. 19% VAT.
  • Rear view camera specially designed for use on vans
  • Easy replacement for the factory 3rd brake light glass
  • Can be used with all monitors, which do have an RCA video input
  • High-quality workmanship and attractive design
A17839
Delivery Time 11 - 14 Days*
Delivery Cost 6,49 € in Dtl.

Versandkosten: 4,99 €

3rd Brake Light Mount Rear View Camera with 10m Cable for Renault Master, Opel Movano, Nissan NV400 (from 2010)

This reversing camera is specially designed for use on the Renault Master, Opel Movano, Nissan NV400 in 2010. The well-known problem: on vehicles with rear doors can not be readily fitted rear view camera. it now uses a conventional configuration camera can indeed align them down, but the rear of many vehicles extends upward slightly round about. A normal reversing camera would capture this curvature and thereby obscure the trailer coupling, the footboard or the bumper.

The rear view camera specifically integrated into the 3rd brake light lens allows, the view of the curvature and thus acquires the entire back wall, bumpers etc. Only this precise maneuvering possible, especially if it is only a few centimeters.

Perfect detail solutions

The high-resolution sensor allows for optimal image reproduction in order to make your maneuvering and parking as comfortable as possible.

Perfect design

Unlike normal construction cameras this is directly integrated into the brake lights glass and fits well into the overall vehicle image, and in addition it is practical. The supernatant, the camera module can be perfectly adapted to the respective vehicle.

Of course, one was conscious in the development of the special requirements for such a camera, so the camera module corresponds to protection class IP68 and is fully waterproof and dustproof.

Attention, please note:

  • Play on the factory Navi via reversing camera interface (optional)
    Do you want to sleep comfortably reflect the image of the rear view camera on your existing monitor your factory navigation system, so you will also need a rear view camera interface.
  • View to the rear
    Depending on the roof construction and installed trailer hitch of the vehicle can not see on the monitor the towbar.
  • Avoid interference with our signal filter (optional)
    Vehicles newer date use to power the vehicle exterior lighting (rear light, brake light etc) clocked a (pulsating) voltage, which is suitable for image sensors / video electronics and has functional or image disorders.
    Therefore, please close the connection cable to activate the reversing camera is not directly connected to the reversing light but use our signal filter. A suitable signal filter, see accessories.

LEGAL NOTICE!

Not allowed in the scope of StVZO and ECE. The use of this item is not permitted on public roads. Shown and listed items are only for show purposes and for motorsports!

An increase in the vehicle dimensions, except for cars and motorcycles is subject to registration and must immediately from the technical inspection or an officially recognized inspection organization ( DEKRA , GTÜ, KÜS, TÜV) are reviewed. Ask before adding or remodeling a licensed expert for vehicle traffic or a test engineer a monitoring organization, if the approval is affected or whether the change is ever approved. The withdrawal of a used camera for credit is excluded.

Weitere Informationen
Scope of delivery
  • Transportation Rear View Camera
  • Power connection and video cable (10m)
  • RCA Interface (m / m)
Brand maxxcount
Product Type Brake light camera
Integration Car-specific
Mounting position Brake lights
Picture sensor Color sensor, 1/3" CCD
Video norm Automatic detection (PAL, NTSC)
Lens angle 170°
Light sensitivity 0 Lux (with IR ON)
Cam resolution 648 x 488 px
color resolution 420 TV lines
Mirroring function Yes
Distance lines No
Night vision function Yes
Backlight Compensation Automatic
White balance Automatic
Protection class IP68
Color black
Additional connection 1x
noise Ratio >48db
Operating voltage 12V
Operating temperature -20°C - 70°C
Cable length 10 m
EAN 4047442068393
Schreiben Sie eine Bewertung
Nur registrierte Benutzer können Bewertungen schreiben. Bitte loggen Sie sich ein oder erstellen Sie ein Konto

Customer Support
maxxcount.de GmbH & Co. KG
Gostritzer Straße 61-63
DE-01217 Dresden

Phone: +49 (0)351 871 8222
Fax: +49 (0)351 / 2145 12 16

You can reach us by phone:
Monday to Friday from 8 a.m. to 5 p.m.