Versandkosten: 4,99 €
We offer you our entry reversing video system for a special price. The set includes a 7-inch TFT flat screen with a visible diagonal 17.8cm and our color rear view camera with 120 ° detection angle and infrared diodes, which also allow imaging in complete darkness.
Connected to the camera and monitor on a 5 m, shielded cable. The system has an auto-on function, ie with the rear gear of the image is automatically rear view camera displayed on the monitor. Alternatively, by different connection options, a continuous operation is possible.
This rear view camera , integrated into a high-quality housing and a resolution of 656x492 pixels with 420 TV lines, parking is not a problem anymore. This high-resolution rear view camera with IP67, dustproof and waterproof. Thus, it is ideal for outdoor use as a reversing system. The video signal is transmitted via a video cinch cable and is so with most monitors or navigation systems compatible (an RCA input must be present or can be adapted).
The field of application are virtually no limits if you want to use it on the car, bus, camper, truck, trailer, etc., almost anything is possible.
The housing is weather-resistant, solid stainless and additionally equipped with a special lens glass, which protects against corrosion and "blindness".
It comes complete with connection cable, video RCA cable and mounting material (See delivery).
Vehicles newer date use to power the vehicle exterior lighting (rear light, brake light etc) clocked a (pulsating) voltage, which is suitable for image sensors / video electronics and has functional or image disorders.
Therefore, please close the connection cable to activate the rear view camera is not directly to the reversing light but use our signal filter. A suitable signal filter, see accessories.
The optics gives you a horizontal wide angle view of 170 degrees, so that the majority can be detected behind the vehicle.
Due to the high light sensitivity of 0 lux, also allows images in the dark. The 4 infrared LEDs do not light as a conventional LED, but radiate mostly for the eye invisible infrared light and thereby provide a highly recognizable black and white image. It easily detects obstacles in the dark at a distance up to 5 meters.
About the camera module distance lines are also displayed in the monitor. This allows the distance to obstacles behind the vehicle better estimate.
The power is supplied via the 12 V connector of your car reversing light, so the camera automatically turns on when reverse gear.
This TFT monitor is specifically tailored to the requirements in vehicles. You can attach the included in the package installation frame on the headrest of the driver / passenger seat or on one foot on the front shelf the TFT monitor optional.
To connect your video devices such. Ex, DVD players, DTT receiver, XBox, PS3, and more, there are 2 video inputs on the back and a front video input available
The monitor is also suitable in conjunction with a rear view camera (sold separately) for use as a rear-view system.
The system has an auto-on function, ie with the rear gear of the image is automatically rear view camera displayed on the monitor.
Guide about the "detection angle" / "Viewpoint" with reversing cameras.
To make it as easy as possible to clarify what effect the selected detection angle of the rear view camera has, we have included the presentation of three Different reversing cameras.
The but very small angle of 60 ° does not cover too much in width, but nevertheless illustrates the more "obstacles" in depth. Characterized the camera for monitoring the "blind spot" or for monitoring the immediate surroundings behind the vehicle is not suitable, since not the complete width of the vehicle is detected. The use of this camera could be used as digital rearview mirror for detecting the rear traffic, in agriculture for control of conveyer belts etc..
The detection angle of 170 ° is enormous, it is extremely Captures much content in width. This is usually done through various wide-angle lenses. This has the disadvantage that the edges or the edge region is distorted. Content in the depth are shown very small, so you should use the camera only to monitor the immediate close range. For example, in the license plate bar, or even in the trailer operation to the full swiveling be able to detect when maneuvering.
From experience to her rear-view cameras have proved best with 120 ° detection angle. You easily capture the entire width of the vehicle, do not produce distortion and still provide a good representation of depth. For example, when mounted on the mobile home or even at the transporter, in the usual height of 2.30 meters, the camera already recorded more than 4 meters in width. aligned Down "barriers" are also in the deep well represented (see figure) Also suitable as a "spy camera" in the bumper of a car,. We carry this the rear view camera STO or STO-IR. For use at the mobile home or the Transportation, we have for example the rear view camera to IR18.
Technical data | Monitor:
|
---|---|
Scope of delivery |
|
Brand | maxxcount |
Product Type | Rear view camera set |
Integration | Universal |
Mounting position | roof |
Picture sensor | Color sensor, 1/4" CMD |
Video norm | NTSC |
Lens angle | 170° |
Light sensitivity | 0 Lux (with IR ON) |
Resolution | 800x480px |
Cam resolution | 656 x 492 px |
color resolution | 420 TV lines |
Mirroring function | Yes |
Distance lines | Yes |
Night vision function | Yes |
Protection class | IP67 |
Color | black |
Additional connection | 3x |
max. Amperage | 290mA |
Operating voltage | 12V |
Operating temperature | -30°C - 70°C |
Cable length | 5 m |
Dimensions |
|
EAN | 4047442003882 |