Versandkosten: 4,99 €
With this set maxxcount.de bring a solution to market that has been developed specifically for use on transporter / van / RV. The common problem: On vehicles with rear doors can not be readily fitted rear view camera. it now uses a conventional configuration camera can indeed align them down, but the rear of many vehicles extends upward slightly round about. A normal reversing camera would capture this curvature and thereby obscure the trailer coupling, the footboard or the bumper.
With the special case of the rear view camera, the camera module itself is set on the buckle out, capturing the entire back wall, bumpers etc. Only this precise maneuvering possible, especially if it is only a few centimeters. The camera module can be set at an angle and can be perfectly adapted to the conditions on your vehicle.
The 1/4 "Sony CCD sensor allows for optimal image reproduction, the integrated 9 infrared diodes support the vision even in total darkness. The camera eye is enclosed in a spherical head and therefore comfortable adjusting the detection angle.
From the camera itself is a 25cm long cable, this one grommet for the cable gland is already installed.
Unlike normal construction cameras, the case fits well into the overall picture vehicle and in addition it is practical. The supernatant, the camera module can be perfectly adapted to the respective vehicle and see for yourself the towing hook, footboard etc.
To obtain a perfect reproduction even in the dark 9 high-power infrared diodes have been integrated. These allow an illustration of the close range up to 8 meters behind the vehicle. Of course, one was conscious in the development of the special requirements for such a camera, this corresponds to a Sony CCD sensor equipped camera module with protection class IP68 and is fully waterproof and dustproof.
This TFT is specifically tailored to the requirements in vehicles. You can attach the monitor very well with the supplied adhesive pad on the dashboard or screw. Because the two video RCA inputs can be in addition to a rear-view camera and a DVD player, DTT connect receiver or the like.
The system has an auto-on function, ie as soon as a video signal is present, the image is automatically displayed on the monitor. When reverse gear is engaged, the monitor turns on automatically and displays the image from the reversing camera.
Technical data | Monitor:
|
---|---|
Scope of delivery |
|
Brand | maxxcount |
Product Type | Rear view camera set |
Integration | Car-specific |
Mounting position | roof |
Picture sensor | Color sensor, 1/4" CCD Sony |
Video norm | NTSC |
Lens angle | 120° |
Light sensitivity | 0 Lux (with IR ON) |
Resolution | 480x272px |
Cam resolution | 628 x 582 px |
color resolution | 420 TV lines |
Mirroring function | Yes |
Distance lines | No |
Night vision function | Yes |
Backlight Compensation | Automatic |
White balance | Automatic |
Protection class | IP68 |
Color | black |
noise Ratio | >48db |
Operating voltage | 12V |
Operating temperature | -20°C - 70°C |
Cable length | 15 m |
Dimensions | Camera (WxHxD): 13.5cm x 21cm x 10cm |
EAN | 4047442069727 |
Compatible with: | This rear view camera is suitable for all transporters and vans. Here are just a few examples:
|
---|