AMPIRE GS506 Glass Break Sensor DIRECTED

AMPIRE GS506 Glass Break Sensor DIRECTED

A hidden microphone installed the AMPIRE GS506 glass breakage sensor analyzes the frequency, intensity and the timing of all notes in the vehicle. The spectral properties of a recorded sound will be evaluated by a microprocessor. In recognition of the typical properties of glass Berstgeräusches alarm. This technology works absolutely false alarm free.

installation

Choose a good installation, for example, under the headlining or towards the monitoring at the wheel, to ensure optimum performance of the sensor. Avoid them. Proximity to loud engines, compressors and blowers Determine the exact position and orientation of the GS506 so that the microphone side of the sensor has an unobstructed view of the monitored wheels. It may conceal the detection angle of the sensor no objects or harnesses.

• Red: Connect the red wire from the 3-pin connector with permanent 12V.
• Black: Connect the black wire of the 3-pin connector to ground or "Mass when Sharp" port on your alarm system.
• Blue: Connect the blue wire from the 3-pin connector with the (-) Alarm Input your alarm system.

settings

Adjust the sensitivity using the small knob on the housing. Make a noise with a keychain, to check the setting. A ticker with a coin on a vehicle window should not trigger an alarm. The red LED lights up whenever the sensor triggers an alarm.