Universal built-on reversing camera with night vision, silver for mobile homes / campers

Universal built-on reversing camera with night vision, silver for mobile homes / campers

With this reversing camera with a resolution of 976 x 592 px and 700 TV lines, looking behind the vehicle and thus manoeuvring, parking and parking are no longer a problem. The robust universal camera is suitable for use on mobile homes, trucks, commercial vehicles, vans, cars, trailers and much more.

Practical universal solution for rough areas of application

Due to its compact and robust design, this high-resolution camera is ideally suited for outdoor use as a surveillance system. The video signal is transmitted via a 10m video cinch cable and is therefore compatible with most monitors and navigation systems (a cinch / RCA input must be available or can be adapted). There are almost no limits to the area of application.

Thanks to the night vision system with 6 infrared LEDs, you always have everything important behind the vehicle in view, even in the dark.

The most resilient parking aid

The camera is solidly manufactured and, with protection class IP68, achieves strong values for dust and splash water protection. In concrete terms, this means that the camera is completely protected against dust and largely water-resistant.

The weather-resistant housing is also equipped with a special lens glass, which protects against corrosion and "blinding".

The delivery is complete with a power/video connection cable that, with a length of 10m, gives you complete freedom during installation. Pre-drilled holes and the rubber seal can be used for attachment.

Please note!
Newer vehicles use a (pulsating) voltage generated via PWM clocking to power the vehicle exterior lighting, which is unsuitable for image sensors/video electronics or results in malfunctions or image disturbances. As a result, the connection cable should not be connected directly to the reversing light, but a signal filter should be used (accessory).