Customer Hotline
+49 (0)351 / 2145 12 12
What is the CAN bus?
Today's radio or navigation systems not only play back the music of the radio or navigation commands, but are also deeply networked with the vehicle's electronics. This communication structure, called CAN-Bus, connects ECUs, sensors, multimedia devices and much more.
Therefore, when replacing the factory radios / notifications, a vehicle-specific CAN bus adapter is required to maintain / keep the communication of all devices integrated in the CAN bus intact.
What can the CAN bus adapter do?
These active radio adapters are required in vehicles with CAN bus (also known as "GM Databus", "GMLan" or "LAN bus" for general engines) to exchange the standard radio or navigation system for an aftermarket device.
The adapters read the CAN bus, generate all required signals and control the original sound system with the audio signal of the new radio / navigation system. They are also required in many vehicles to connect the steering wheel remote control.
» Radio / Navi retrofit simple and fast: PAC RadioPRO 3 / 4 / 5 Serie
-
Axxes AXDIS-LR82 CAN-BUS Interface set including SWC Interface for Land Rover Range Rover Vogue 2006-2012 (MOST 25 amplifier)- Allows the factory radio to be exchanged and the functions of the original steering wheel remote control to be retained
- Steering wheel remote control adapter already integrated in the interface
- For Land Rover Range Rover Vogue with amplifier
- Includes audio controls on the steering wheel
- Provides the following signals: speed signal, handbrake signal, reversing signal,
€599.00Incl. 19% VAT , excl. Shipping Cost
Free Shipping in GermanyA21715Delivery Time 8 - 11 Days* -
PAC RP5-GM41 CAN-BUS Adapter Set for Chevrolet Sonic & Spark (from 2012)- Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control.
- Steering wheel remote control in the interface already integrated.
- Controls (if available) to the car's amp via CAN bus
- In addition to ignition plus with RAP (delayed disconnection) The following signals
- Speed signal,
- Hand brake signal,
- Reversing signal,
- instrument lighting
€319.00Incl. 19% VAT , excl. Shipping Cost
Free Shipping in GermanyA17058Delivery Time 8 - 11 Days* -
Axxess AX-FT902 CAN-BUS Interface set including SWC Interface for Fiat 500X with U-Connect- Allows the factory radio to be exchanged and the functions of the original steering wheel remote control to be retained
- Steering wheel remote control adapter already integrated in the interface
- For Fiat 500X with U-Connect (non-amplified)
- Balance and fading are retained
- Includes audio controls on the steering wheel
- Receives parking sensor warning tones
- Preserves most of the vehicle settings that were displayed on the factory radio 1
- Provides the following signals: speed signal, handbrake signal, reversing signal,
€299.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA21276Delivery Time 11 - 14 Days* -
Axxess AX-FT901 CAN-BUS Interface set including SWC Interface for Fiat 500 / 500L with U-Connect- Allows the factory radio to be exchanged and the functions of the original steering wheel remote control to be retained
- Steering wheel remote control adapter already integrated in the interface
- For Fiat 500 / 500L with U-Connect (non-amplified)
- Balance and fading are retained
- Includes audio controls on the steering wheel
- Receives parking sensor warning tones
- Preserves most of the vehicle settings that were displayed on the factory radio 1
- Provides the following signals: speed signal, handbrake signal, reversing signal,
€299.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA21275Delivery Time 11 - 14 Days* -
Axxess AX-HYKIA2-SWC CAN bus Adapter for Hyundai Veloster from 2012- Allows simple exchanging the factory radio / -navis against an aftermarket device
- Provides required when retrofitting data (eg Ignition, speedometer and reverse signal, gain control)
- replaced the original Blue Link system
- Designed for amplified (Requires the AX-HYKIA-SPDIF) and non-amplified models
€279.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17254Delivery Time 15 - 18 Days* -
Axxess AXDIS-FD2 CANBus Interface for Ford (from 2011) with ACC & NAV- Necessary when replacing the factory radio / -Navi against an aftermarket radio / navigation system
- Especially for selected Ford vehicles with ACC + NAV
- Does the CAN databus communication intact
- Receives audio operation of the steering wheel remote control
- Provides the following amplifier functions still available:
- High-level speaker input
- Plug & Play installation
- Always "up-to-date": software updates via micro-B USB Port
€279.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17676Delivery Time 8 - 11 Days* -
Axxess AXDIS-CH13 CAN bus Interface Kit incl. SWC Interface for Chrysler, Dodge , Jeep- Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control
- integrated steering wheel remote control in Interface
- Retains balance and fade (non-amplified models only)
- Controls (if available) to the car's preamp via CAN bus
- Situated beside ignition positive with RAP (delayed disconnection) The following signals
- Speed signal,
- Hand brake signal,
- Reversing signal,
€279.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17858Delivery Time 8 - 11 Days* -
Axxes AX-TYAMP2-SWC CAN-Bus Adapter (Amplifier + SWC) for Toyota 2012+- Necessary when replacing the factory radio / navigation device with a retrofit radio / navigation device
- Especially for selected Toyota 2012 up
- Keeps the CAN data bus communication intact
- Retains audio controls on the steering wheel
- Retains the factory AUX-IN jack
- Retains balance
- Always "up-to-date": software updates via micro-B USB port
€279.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA20532Delivery Time 8 - 11 Days* -
PAC RP5-GM31 CAN-BUS Adapter Set (OS-4 + SWI-RC) for GMC, Chevrolet, Cadillac without OEM navigation- Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control.
- Steering wheel remote control in the interface already integrated.
- Controls (if available) to the car's amp via CAN bus
- Controls (if present) the on-board video entertainment system
- In addition to ignition plus with RAP (delayed disconnection) The following signals
- Speed signal,
- Hand brake signal,
- Reversing signal,
- Reversing camera signal (picture),
- instrument lighting
€269.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17013Delivery Time 1 - 4 Days* -
PAC GM1A-RST CAN-BUS Adapter Set for General Motors (with Class2) with OnStar - RP5-GM11 Upgrade- Enables radio replacement and retains OnStar + steering wheel controls functions
- Steering wheel remote control adapter already integrated
- Controls (if available) the vehicle's Bose amplifier via CAN bus
- Controls (if available) the on-board video entertainment system
- Warning chimes through external speaker
- Includes Antenna adapter
- Setting the audio fading
- USB updateable
€265.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA20110Delivery Time 11 - 14 Days*
