Powered by Smartsupp
Produktfinder Finde alles für Dein Fahrzeug

Wird geladen …

AMPIRE KV-CRAFT-2 Rear view camera incl. 10m cable for VW Crafter 2 from 2017

Regulärer Preis 149,00 € Sonderpreis 134,10 €
Incl. 19% VAT.
  • Rear view camera specially designed for use on transporters
  • Simple assembly using the 3rd brake light factory set
  • Adjustable vertical angle of coverage for perfect field of view adjustment
  • With integrated microphone
  • Can this be used with a video input
  • High-quality workmanship & visually appealing design
A20128
Delivery Time 1 - 4 Days*
Delivery Cost 6,49 € in Dtl.

Versandkosten: 4,99 €

AMPIRE KV-CRAFT-2 Rear view camera incl. 10m cable for VW Crafter 2 from 2017

Our brake light cameras are vehicle-specific tailor-made solutions for the integration of a rear view camera. Due to the elegant integration in the area of the brake light, the camera on the vehicle is very discreet. Due to its precise fit, it is secure and permanently installed there.

By positioning it above the brake light, the camera is high and looks downwards. This allows you to see the entire vehicle when parking, turning or maneuvering.

With the achieved protection class IP67, which is both dust and water protected. Even temperatures from -30 to + 70 ° C can not damage the camera.

A 10m connection cable is included in the scope of delivery with which you can easily master even long installation paths.

Specially developed for transporters

The curvature of the roof above the tail makes the installation more difficult and thus reduces the rear-valued viewing area. The integration over the brake light glass and the vehicle provides a much better view of elements behind the vehicle.

Adjustable angle of coverage for perfect field of view

The integrated camera module can be adjusted vertically in angle (20 °), so you can react to the conditions on the appropriate vehicle and make the optimum settings. A wide-angle view of 170 ° is optimal for displaying the close-up range.

Image reproduction of the rear view camera

A retrofit navigation system (from Pioneer, Sony, Alpine , Kenwood, etc.) or via the rear view camera interface (optional). directly on the factory navigation system when reverse gear is engaged.

Sharp picture through 580 TV lines

The number of TV lines determines the screen speed and therefore the resolution. The higher the resolution, the clearer and more detailed image is displayed on the monitor.

Protection against moisture and dirt

With protection class IP67, the camera is optimally protected against environmental influences such as humidity and dust. The first figure shows the protection against foreign objects / contamination, while the second figure refers to water resistance.

Safe parking even in the dark with night vision function

The integrated infrared diode is ready for optimal display of the wide range behind the vehicle when daylight is no longer sufficient. This allows you to park safely or even in poor visibility and darkness.

With integrated microphone

In addition to the picture, the camera also provides audio signals via an integrated microphone. For example, you can hear children playing the vehicle or the announcements of a guide.

Attention, please note:

  • Playback on factory navigation via rear view camera interface (optional)
    If you want to display the picture of the rear view camera comfortably on your existing monitor of your factory navigation system, you additionally need a rear view camera interface.
  • Rear view
    Depending on the roof structure and the trailer hitch installed on the vehicle, the trailer hitch cannot be seen on the monitor.
  • Avoid image interference with our signal filter (optional)
    Recent vehicles use a pulsed voltage for the power supply of the exterior vehicle lighting (rear light, brake light etc.), which is unsuitable for image sensors / video electronics and results in malfunctions or image disturbances.
    Therefore, please do not connect the connection cable for activating the rear view camera directly to the reversing light but use our signal filter. A suitable signal filter can be found under Accessories.
Weitere Informationen
Scope of delivery
  • Camera
  • Harness 10m
  • Mounting material
Brand AMPIRE
Product Type Surface mount camera
Integration Car-specific
Mounting position Brake lights
Picture sensor Color sensor, 1/3" CMD
Video norm NTSC
Lens angle 170°
Light sensitivity 0 Lux (with IR ON)
Cam resolution 648 x 488 px
color resolution 580 TV lines
Mirroring function Yes
Distance lines Yes, Switchable
Night vision function Yes
Backlight Compensation Automatic
White balance Automatic
Protection class IP67
Color black
Operating voltage 12V
Operating temperature -30°C - 70°C
EAN 4047442089015
Schreiben Sie eine Bewertung
Nur registrierte Benutzer können Bewertungen schreiben. Bitte loggen Sie sich ein oder erstellen Sie ein Konto

Customer Support
maxxcount.de GmbH & Co. KG
Gostritzer Straße 61-63
DE-01217 Dresden

Phone: +49 (0)351 871 8222
Fax: +49 (0)351 / 2145 12 16

You can reach us by phone:
Monday to Friday from 8 a.m. to 5 p.m.