Versandkosten: 4,99 €
The LC1i joins ranks with AudioControl’s most popular active line output converter, the LC2i. Adding a sub? Planning a full system? Either way, get the best possible signal from your factory sound system to your amplifiers. Load selection switches mean OEM integration has never been easier and the LC1 will work with the most finicky factory sound systems. Installer friendly turn on trigger modes allow for flexibility via GTO™ Signal Sense (DC offset), audio sense, or remote 12 volt inputs. For future head unit upgrades, the LC1i is also a line driver and can remain in the system to provide optimal preamp signal.
Many cars can turn on the factory amplifier even if the source unit is off (Alarms, Cell phones, etc). To prevent this from turning your system on unexpectedly, you can bypass the GTO™ circuit by moving the GTO™ jumper, and using an applied 12-volts at the Remote In terminal. Using the jumper may result in some factory features not working fully.
Yes, the LC1i is an active line output converter and should be connected to the battery for constant 12 V and to the common ground for amplifiers and processors.
No, the LC1i has a GTO signal sampling, which switches the device on when it detects a signal at the input of your factory amplifier or main unit.
The LC1i offers all of the features you'd expect in a high quality LOC without AccuBass or an ACR-1 dash mounted control knob port.
The LC2i Pro provides all the essential features needed when integrating aftermarket amplifiers with today's more complex factory sound systems.
The LC6i offers easy signal summing, 40 volts input handling and clean high to low level conversion.
When installing multi-channel amplifier systems into vehicles that will retain their factory radio, the LC6i offers a popular set of features to get the install done right and the vehicle sounding great... the first time.
The DQ-61 provides most of the popular features of a digital signal processor, but allows the installer to use traditional dials and switches instead of apps or software. With it's built-in EQ, time correction, signal summing, line driver, line output conversion and AccuBass features, the DQ-61 is an incredible value.
The LC8i offers 8 channels of easy signal summing, 40 volts input handling and clean high to low level conversion as well as an easy-to-use AUX input that can be controlled via the included ACR-2 dash mounted remote level control.
A digital signal processor is your solution. Our DM series (digital matrix) DSP's feature line output conversion, equalization, crossover, time alignment, signal summing, AccuBass and remote level control that can be assigned to any output. Our DM-Smart DSP app allows control of all features, runs on all popular platforms, and is among the easiest to use in the industry.
That's what makes the new LC-5.1300 an installer's dream. The combination of class-leading power levels, built-in line output converter with signal summing, flexible crossover section and unmatched warranty make the LC series of amplifiers like nothing else you've ever installed. This particular model boasts 1300 watts of RMS power and a streamlined interface for easier installation.
That's what the D series of amplifiers from AudioControl represent. If you're looking to install one amplifier that can truly "do it all", then the D-5.1300 is for you. With 1300 watts of RMS power, an onboard DSP, built-in LOC & signal summing, as well as a pair of RCA outputs from the DSP for future system expansion, there is truly nothing else quite like it.
| Technical data | Inputs
Outputs
Performance
General
Weight & dimensions
|
|---|---|
| Scope of delivery |
|
| Brand | AudioControl |
| Product Type | High-Low Adapter |
| Eingangs-Kanäle | 2 |
| Ausgangs-Kanäle | 2 |
| Vorverstärker-Leistung | 9,5Vrms |
| EAN | 0851523007799 |
