Versandkosten: 4,99 €
The two-way system has AP 1 Tweeter and AP 6.5 Woofer . The APCX TW crossover is equipped with a two-stage level selector, which enables adaptation to the two main applications: +2 dB when installed behind the OEM grille, 0 dB for A-pillar without additional grille between Tweeter and receiver.
To facilitate installation in an OEM system, the Woofer equipped with high-current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
The AP 1 Tweeter has an emission membrane with a diameter of 26 mm, an acoustic lens to compensate for the frequency response in the range from 10 kHz to 13 kHz, a neodymium REN magnet and an extremely small passive crossover.
AP 6.5 has a 32 mm coil made of pure copper for high load capacity and excellent low frequency control. All woofers do not use a filter to maximize efficiency: the dome profile has been optimized with the Klippel R&D scan vibrometer to obtain a calibrated mechanical low-pass cutoff frequency. The surround has the exclusive flat "triple wave" profile for maximum linearity.
Technical data | D: 129mm |
---|---|
Scope of delivery |
|
Brand | Audison |
Product series | Audison prima |
Product Type | Compo system |
Speaker Size | 16,5 cm |
Design | 2-way |
Tweeter size | 26 mm |
Tweeter cone | Tetolon® |
Tweeter magnet | Neodymium |
Tweeter install depth | 8,5 mm |
Woofer size | 16,5 cm |
Woofer cone | Water-repellent pressed paper |
Woofer magnet | Ferrite |
Mounting depth | 56mm |
Crossover type | 2 Way Passive Crossover |
Crossover cut off | 3,5 kHz @ 6 dB Oct. |
Efficiency | 93 dB |
Impedance | 4Ω |
Frequency Response | 60 Hz ÷ 20 kHz |
Color | black |
Lautsprechergitter inklusive? | Ja |
Power Rating (RMS) | 100W |
EAN | 8018823111720 |