Customer Hotline
+49 (0)351 871 8222
Einkaufsoptionen
Car Audio Accessory
- 89,00 €Incl. 19% VAT.
Connection SFD 41C Distribution Block + Mini-ANL Fuse Holder 1/0GA - 8GA - SONUS Series- UNIQUE ONE PIECE fuse and ground system for clean, reliable installations
- POLYCARBONATE casing, strong and scratch resistant
- 1/0 AWG on both fused and ground input, 1/0 AWG pass through on fused block
- SMB™ (Solid Machined Brass) construction for improved current transfer
- PLATINUM SATIN finish for unparalleled cosmetic appeal
- KNURLED SCREWS for low-loss contact with the cable strands
- RECESSED inset cable collar for protection against “stray” wire strands
- MOLDED CABLE REST keeps wires safe and nicely laid out
- 1 – 2 AWG and 3 – 4 AWG on both AFS fused and ground outputs
89,00 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A21600Delivery Time 11 - 14 Days* - 69,00 €Incl. 19% VAT.
Pioneer CD-RGB150E extension cable 1.5m for SPH-EVO62, EVO82, EVO93DAB models- Allows individual mounting of the SPH-EVOxxx display
- Suitable for the models SPH-EVO62, SPH-EVO82 and SPH-EVO93
- Cable length: 1.5m
69,00 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A21052Delivery Time 1 - 4 Days* - 68,25 €Incl. 19% VAT.
Stinger SPD5625 MAXI 4-POSITION 4ga.IN / 8ga.OUT- PRO Series Maxi Fused Distribution Block
- 2x 4 Gauge inputs / 4x 8 Gauge outputs
- High power MAXI Fuse protection
- Deep wire recesses eliminate exposed wire
- Oversized set screws ensure maximum contact
68,25 €Incl. 19% VAT.Delivery Cost 1.95 € in Dtl.A18560Delivery Time 6 - 9 Days* - 59,00 €Incl. 19% VAT.
Audison AP 260P&P I/O ISO extension cable 2.6m for AP bit amplifier- Built with twisted cables, for effective elimination of disturbances
- Cut-proof protective shield
- High flexibility for maximum ease of installation
- In/Out double connector, to also receive the amplified signal of the AP bit amplifiers
- No soldering required
- Length: 2,6m
59,00 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A21495Delivery Time 11 - 14 Days* - 55,99 €Incl. 19% VAT.
Stinger SPD5623 MAXI 4-POSITION 0ga.IN / 4ga.OUT- PRO Series Maxi Fused Distribution Block
- 2x 1/0 Gauge inputs / 4x 4 Gauge outputs
- High power MAXI Fuse protection
- Deep wire recesses eliminate exposed wire
- Oversized set screws ensure maximum contact
55,99 €Incl. 19% VAT.Delivery Cost 1.95 € in Dtl.A18559Delivery Time 6 - 9 Days* - 49,00 €Incl. 19% VAT.
Connection BFD 41 Distribution Block 4GA - 1/0GA Input - BEST Series- AFS Fused Distribution, 1/0 & two for 4 AWG input, one for 2 AWG & three for 4 AWG output, 4 positions, 8 AWG adapter
- POLYCARBONATE CRYSTALS casing, strong and scratch resistant
- 4 AWG to 1/0AWG inputs for any current demand
- SMB™ (Solid Machined Brass) construction for improved current transfer
- PLATINUM SATIN finish for enhanced cosmetics
- KNURLED SCREWS for low-loss contact with the cable strands
- RECESSED inset cable collar for protection against “stray” wire strands
49,00 €Incl. 19% VAT.Delivery Cost 1.95 € in Dtl.A21565Delivery Time 11 - 14 Days* - 48,90 €Incl. 19% VAT.
Audison AP 160P&P I/O ISO extension cable 1.6m for AP bit amplifier- Built with twisted cables, for effective elimination of disturbances
- Cut-proof protective shield
- High flexibility for maximum ease of installation
- In/Out double connector, to also receive the amplified signal of the AP bit amplifiers
- No soldering required
- Length: 1,6m
48,90 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A21512Delivery Time 11 - 14 Days* - 45,99 €Incl. 19% VAT.
VIBE CLQIPC-V7 0AWG Quad Amplifier Terminal Adapter for 4x 50mm², made of 100% OFC copper- QuadTerminal power connection adapter for amplifiers with 50mm² inputs.
- Input: 4 x 50mm² (0 GA)
- Output:1 x 50mm² (0 GA)
- Perfect for getting that extra bit of power out of the amp
- Made from 100% OFC copper & brass for the best possible power transmission
- Suitable for both plus and minus connection
- Screw terminals for a secure connection
- Includes 2 power adapters (1 pair)
- From the high-quality Critical Link series
45,99 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A22951Delivery Time 1 - 4 Days* - QuadTerminal power connection adapter for amplifiers with 50mm² inputs.
- Regulärer Preis 49,90 € Sonderpreis 44,91 €Incl. 19% VAT.
-10%Audison AP 560P&P IN ISO Extension 5,6m for AP Amplifier- Built with twisted cables, for effective elimination of disturbances
- Cut-proof protective shield
- High flexibility for maximum ease of installation
- Allows free positioning of Audison AP amplifiers
- No soldering required
- Length: 5,6m
Regulärer Preis 49,90 € Sonderpreis 44,91 €Incl. 19% VAT.Delivery Cost 1.95 € in Dtl.A21516Delivery Time 1 - 4 Days* - 40,94 €Incl. 19% VAT.
Stinger SHD21 4 Pos Power or Ground Distribution Block- (2) 1/0 Gauge or 4 Gauge inputs / (4) Gauge or 8 Gauge outputs
- Multiple input/output design
- Protective cover included
- Compact space saving design
40,94 €Incl. 19% VAT.Delivery Cost 1.95 € in Dtl.A18492Delivery Time 1 - 4 Days*
