Versandkosten: 4,99 €
Do you want to finally enjoy the high quality digital radio with its multitude of radio stations? Have you searched all the time, found nothing and would it be far too complicated to integrate it into the vehicle electronics?
DENSION DAB+U digital radio interface is just right for you! Because this is simply connected to the factory-installed USB port DENSION DAB + U in use The digital radio stations are shown like MP3 files in the radio / navigation display and thus enable simple operation and broad compatibility. The station search and setting options are also displayed as virtual MP3 files. Here, control is very simple using the buttons on the radio / navigation system or, if available, with the steering wheel remote control. Incidentally, the digital radio standards DAB , DAB + and DMB-R are supported. After plugging the DAB + U into the USB interface, go to “IPOD” and select the “ARTISTS, sometimes ALBUMS” folder and then to “SETTINGS” and then to “SCAN”. After a minute you will see the available channels. The advantage of this new firmware is that there are almost no more buffering times and the stations start playing immediately after 2-3 seconds. Please check under "Compatibility" whether your vehicle is already listed as compatible or incompatible. With the DENSION Glovebox EXT2CP2 (not included in the scope of delivery / optionally available under accessories) you can easily and conveniently continue to use your USB connection for storage media. Simply flip the switch on the DENSION , the DAB + U interface is deactivated and the USB connection on the glovebox is activated. You can play music from your USB stick or another USB storage medium as usual. As in the previous version (DBU1GEN), the functionality is not removed. Simply DENSION DAB + U interface to the original USB port 1 of the vehicle using the supplied USB cable. The device itself is supplied with power via the USB connection and does not have to be laid separately. The only accessory that is required is a DAB + antenna for digital radio reception. Here you can choose between a passive or active antenna (including power supply). DENSION connect the desired antenna to the SMB antenna connection (SMB) on the DAB+U, start the ignition and check the status LED 2 - done. Installation tip: If laying the DAB antenna is too cumbersome for you, you can even use your existing radio antenna as an alternative, of course only in conjunction with our DAB + FM VHF splitter. 1 The original USB port must be capable of MP3 / play MP3 files. Firmware update for radios with iPod control
NEW: Continue to use the USB port with the optional glovebox
DENSION DAB + U installation
2 The status LED lights up continuously, indicating that the power supply has been successful. If the LED flashes, simply check the connections.
Technical data | Connections:
Supported digital radio standards:
|
---|---|
Scope of delivery |
|
Brand | DENSION |
Product Type | DAB+ Tuner |
Ports | DAB+, USB |
Features | Digital-Radio |
Control by | Navigation, Radio, Steering wheel control, Touchscreen |
Color | black |
EAN | 4047442095818 |
Compatible with: |
|
---|---|
Not compatible with: |
|
Important notes | Limited function for:
|