ESX QXFA6.2C set 2-way compo + 2-channel nano amplifier 190W Class-D for Fiat Ducato, Citroen Jumper & Peugeot Boxer from 2006

ESX QXFA6.2C set 2-way compo + 2-channel nano amplifier 190W Class-D for Fiat Ducato, Citroen Jumper & Peugeot Boxer from 2006

With the QXFA6.2C active complete set for the Fiat Ducato platform, consisting of ESX QXF6.2C 2-way component system and ESX QS-TWO-ISO nano amplifier, ESX offers a brand new sound package, where not only the fair price makes the purchase decision easy: the system is plug&play ISO-ready and only needs to be installed and plugged in.

QUANTUM QXF SPEAKER SYSTEM FOR FIAT DUCATO PLATFORM

With the perfectly fitting QUANTUM QXF6.2C 2-way loudspeaker system for the popular Fiat Ducato platform, a sound upgrade can be implemented quickly and easily via plug & play installation. The improvement compared to the original speakers is amazing and ensures optimal and relaxed sound, especially on long journeys. The lightweight mid-woofers with ABS basket fit perfectly into the vehicle's original openings without additional adapter rings. These deliver powerful bass down to 50 Hz. There is an integrated socket at the top of the basket to connect the original loudspeaker cables in the vehicle. With an astounding degree of efficiency of 93 dB and a load impedance of 3 Ω, the component set develops great joy in playing with any radio or amplifier. The 25 mm neodymium tweeters with aluminum domes are crystal clear and extend the sound reproduction of the mid-bass drivers up to 24,000 Hz. The 6 dB cable crossover is already integrated in the tweeter connection cable, which ensures a clean separation at 3800 Hz.

• 90W/RMS, 180W/MAX,
• Impedance 3Ω
• Frequency range 50 - 24000 Hz
• 160 mm woofer with paper cone
• 25mm aluminum tweeter
• 6dB cable crossovers
• installation opening 155 mm,
• Installation depth 51 mm
• Plug+Play connections

QUANTUM QS-TWO NANO AMPLIFIER

Anyone who was already happy about the QM-TWO and its small dimensions should take a look at the new QS-TWO. The ESX engineers have accomplished the feat of further miniaturizing the 2-channel CLASS D power amplifier. At just 90 x 70 x 35 mm, it takes up 30% less space than the QM-TWO, which was already only palm-sized.

With an impressive 2 x 95 watts RMS at 2 Ω, the small QS-TWO is anything but flimsy. On the contrary, it effortlessly drives loudspeaker systems with 4, 3 or 2 Ω impedance and remains very stable even with critical loads. With a mono bridge output of 190 watts RMS at 4 Ω, it can also elicit a decent amount of bass from subwoofers. Incidentally, it impresses with its high-end sound: Thanks to the enormous bandwidth of up to 60,000 Hz and a sensationally low distortion factor of <0.007% (THD+N @ 5W), the QS-TWO is way ahead. Perfect for HD AUDIO.

ESX masters the construction of Class D power amplifiers so well that the QS-TWO can come up with a sensational efficiency of up to 90% and EMC interference-free. The modern technology saves electricity, relieves the vehicle electrical system and protects the high-quality components from overheating. Thanks to the high level of efficiency, no annoyingly thick power cables need to be pulled. If you want it to be very simple, you can use the QS-TWO-ISO, which can be connected via a ready-made ISO cable harness, for example behind the car radio. On the signal side, the QS-TWO is controlled via RCA/cinch or alternatively via the integrated high-level inputs (with EPS).

• 2 x 52/95 watts RMS @ 4/2 Ω
• 1 x 190 watts RMS @ 4 Ω bridged
• Highpass/Lowpass switchable @ 80 Hz
• Ultra-Low Distortion THD+N @ 5W/RMS < 0.007%
• Frequency response 10 Hz to 60 kHz
• Perfect for HD audio
• 2-channel RCA/cinch line out for active subwoofers, for example
• High level inputs with EPS
• Automatic switch-on function
• Up to 90% efficiency
• Dimensions: 70 x 35 x 90mm