Hertz

B-ware: The control unit has breakages and small scratches on the fastening eyelets!

• Cable remote control for subwoofer level
• For Hertz EP / HE / HDP amplifier series
• Original Hertz accessories

B-stock: New goods in opened original packaging!

• 10“/25cm Free Air Marine Subwoofer
• 2 Ohm Single Voice Coil
• 250W RMS / 500W Max
• Mounting diameter: 277 mm
• Mounting depth: 145 mm
• Long-throw 50mm (2”) voice coil
• Polypropylene cone injected with UV inhibitors and comolded Santoprene surround
• Progressive-design aramid fiber spider with silicone-insulated lead wires
• Gold-plated corrosion resistant brass connection terminals with silicone cap protecting leadwire junction point
• Manufactured according to IP65 marine standards
• 100% UV stability according to ASTM D4329
• Suitable for use at sea & off-road (yachts, boats, jeeps, UTV, etc.)

• 12“/30cm, Dual Voice Coil 2 Ohm
• Power: 600W RMS / 1200W Max.
• Ergonomic, compact design, specifically developed for sealed box enclosures starting at 27 lt volume
• CCAW, 65 mm (2,5”) 4-layer voice coil, capable of handling 1200 W musical power
• Voice coil wound on TIL-P material with venting holes behind the winding. This combines efficient heat dissipation with a high Qms factor (low mechanical loss) for bursting dynamic sound
• Exponential V-cone® with optimized geometry for high cone stiffness and strong resistance to deformation even at maximum excursions
• Boundary Free IIR rubber surround, for higher SPL performance while keeping a nominal external diameter
• Mineral-injected paper cone, for superior rigidity and damping
• Extremely acoustically transparent anti-resonant aluminium alloy basket with six-spokes standing structure and built-in venting holes underneath the spider
• CNC machined elegant diamond-cut basket edge featuring the Hertz logo
• Terminal block accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations
• Possibility to secure the subwoofer to the box wall, taking full advantage of its minimal dimensions
• High performance compact motor with a superior magnetic field transferred to the coil

• 12“/30cm, Dual Voice Coil 2 Ohm
• Power: 1000W RMS / 2000W Max.
• 75 mm (3 in.) dual voice coil (2 + 2 Ω) developed in 4-layer configuration on a support with venting holes for a peak power of 2000 W
• Double layer spider with progressive profile for maximum consistency of performance over time
• Multilayer foam surround to ensure very high excursion, essential for generating high SPL during Bass Wars
• Oversized suspension and leadwires to withstand very high excursions
• Impressive oversized ferrite magnet assembly for maximum control
• 12 AWG high current Nickel-plated push connectors for a practical and safe connection
• Non-pressed paper cone with added cotton fiber for maximum sensitivity

• 10" /25cm, Dual Voice Coil 2 Ohm
• Power: 600W RMS / 2400W Max.
• High magnetic permeability plates provide constant, even flux
• Large double magnet, for perfect control under high power, very high excursion conditions for high SPL performance
• Four-layer aluminium voice coil; for unheard-of thermal capability
• Back plate venting holes, for optimal thermal dissipation
• Back vented spider support; for perfect symmetry under high excursion
• Double wide-wave, resin-bonded fibre spider; for consistent parameters and reliability
• Water-repellent, pressed paper cone
• High density foam surround; for linear movement, even under extreme excursion

• 12“/30cm, Dual Voice Coil 2 Ohm
• Power: 800W RMS / 3200W Max.
• High magnetic permeability plates provide constant, even flux
• Large double magnet, for perfect control under high power, very high excursion conditions for high SPL performance
• Four-layer aluminium voice coil; for unheard-of thermal capability
• Back plate venting holes, for optimal thermal dissipation
• Back vented spider support; for perfect symmetry under high excursion
• Double wide-wave, resin-bonded fibre spider; for consistent parameters and reliability
• Water-repellent, pressed paper cone
• High density foam surround; for linear movement, even under extreme excursion

• 6,5“/16,5cm, 55Hz-7kHz, Single Voice Coil 4 Ohm
• Power handling: 70W RMS / 210W Max.
• Semi-pressed paper cone SPP-M (Semi Pressed PaperMica) enhanced with Mica powder for an excellent balance between lightness and damping
• High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels
• 25 mm (1 in.) voice coil featuring an aluminum former to guarantee high excursion and power handling
• Compact and transparent three-spoke basket acoustically combined with a rubber magnet cover for total damping of spurious vibrations
• Optional elegant grille made with high-resistance ABS plastic structure with a metallic finish combined with a protective metal mesh

• Soft Tetolon® fiber 26 mm (1") dome and 20 mm (0.8") voice coil
  • Max.: 120W
  • Impedance: 4 Ohm
  • Frequency: 1,8 kHz - 22,5 kHz
• Integrated 6dB HighPass crossover filter
• Compact separate crossover
• Faceplate geometry optimized with FEM (Finite Element Modeling) technique for a linear frequency response in off-axis installations
• Inclusive accessories for surface and recessed mounting
• Neodymium Magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range

• 20 cm / 8" subwoofer grille
• high resistance ABS metal finish grille
• removable metal grille
• ideal for installation in the car

• Protective grille for Hertz CS 250 subwoofers
• Featuring a diamond Hertz aluminum logo
• Material: sturdy black metal mesh
• Pattern: honeycomb