Improved components
The EVOX2 series features more robust and reliable transistors that guarantee significantly better performance and higher power consumption when needed most.
Ab 2.997,77 € Regulärer Preis 3.155,55 €
Versandkosten: 4,99 €
Brand | maxxcount Bike Sound Systems |
---|---|
Product Type | Bike Sound Bundle |
Co-developed with iDatalink Maestro, the DSR1 combines a full-featured 3Sixty digital signal processor with a flashable Maestro integration module. The DSR1 can be used out-of-the-box with high or low level input, or with a quick flash download to add vehicle specific firmware to enable integration without the loss of factory equipped controls and features. Once connected, complete control of the sound profile can be adjusted using the proprietary Rockford Fosgate PerfectTune™ software.
The DSR1 is the first real solution for replacing the factory amplifier and speakers in Ford and Chrysler vehicles, as the DSR1 uses the full-range, flat audio signal from the factory source unit.
After the built-in Maestro interface is flashed with the vehicle-specific firmware, the factory source unit CANbus messages are used to control the internal signal routing of the DSR1. The DSR1 still utilizes the power processor found in our patented 3Sixty.3, but adds an easy to use app for tuning from Apple and Android devices.
The equalizer can account for whatever flash your bike currently has. The plug & play signal harness comes with load resistors built into it that dramatically improves the sound quality of your factory Harley-Davidson® radio.
The iDatalink Maestro technology is a flashable module that allows vehicle specific firmware to be downloaded to the unit, enabling integration into a factory installed system without the loss of factory equipped controls and features.
Bluetooth connectivity allows connection to a mobile device for tuning (non audio streaming.)
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
Der ultrakompakte S8 DSP ist die perfekte Lösung für die Integration jeder OEM-Quelle in Ihr Audio-Upgrade-Projekt für Autos, Motorräder und Boote! Der S8 DSP ist eine destillierte Essenz der Technologie im Dienste der höchsten Audioqualität in einem korrosionsfreien Gehäuse aus Metall und Verbundwerkstoffen.
Der S8 DSP verarbeitet das Audiosignal mit einer Auflösung von 96 kHz / 24 Bit und hat von der JAS (Japan Audio Society) die Hi-Res-Zertifizierung erhalten, eine Anerkennung, die das extreme Niveau der erreichten Audioleistung bescheinigt.
Der leistungsstarke 32-Bit-DSP verwaltet 6 analoge Eingangskanäle mit hohem/niedrigem Pegel, einen digitalen Koaxialeingang und 8 Ausgangskanäle und bietet dem Fachmann maximale Konfigurationsfreiheit. Der SPDIF-Koaxialeingang ist ideal für die digitale Verbindung mit einem Hi-Res-Player, eine Lösung, die eine maximale Hörqualität ermöglicht. Für jeden der acht Ausgangskanäle stehen ein Pegelregler, der 15-polige parametrische Equalizer, Zeitverzögerungen und Crossover-Filter zur Verfügung. Der parametrische 7-Band-Equalizer des Eingangssignals ermöglicht es, eine flache Antwort von OEM-Quellen zu erhalten, die oft eine übertriebene Betonung der tiefen Frequenzen aufweisen.
Dank des integrierten Bluetooth® 5.0-Empfängers können wir jeden Parameter des DSP drahtlos über die CONFIGURATOR App für Apple- und Android-Tablets und -Smartphones steuern.
Die PC-Software ist sowohl für PC als auch für Apple OS erhältlich. Es werden vier Konfigurationsvoreinstellungen unterstützt, sodass Sie die ideale Einstellung für jede Hörsituation wählen können.
Der Spezialist beginnt den Tuning-Prozess mit der Auswahl des Fahrzeugtyps, der installiert werden soll, aus drei verfügbaren Optionen (Moto / Car / Free) und fährt mit der Konfiguration der Lautsprecher und aller anderen Parameter fort.
Jeder Ausgangskanal verfügt über:
Totally new NEO SPL coaxial SX 165 NEO cone is made with nature-proof high stiffness pressed-paper featuring innovative water/humidity resistant and anti-UV treatments. The double layer copper voice coil, wound on polyamide former ensures unparalleled power handling. New motors units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance. SX 165 NEO features a large Hi-SPL 1.4” PEI dome tweeter with resettable solid-state protection circuit and a protective rubber gasket for high SPL and a safe outdoor use.
The new SV 165 NEO features compact dimensions and low weight, while maintaining excellent performance thanks to the use of neodymium N38 H for the motor units. To allow safe outdoor use without discoloration over time, cone has sealing and anti-UV treatment and motor units are painted with cataphoresis with insulated leads to avoid oxidation. The clamps and mounting holes are compatible for installation on Harley-Davidson® motorcycles!
The NEO line bullet tweeters are a completely new project, lighter and more compact compared to the previous ST 25 and with superior performance thanks to the use of neodymium N38 H for the motor units and a FEM (Finite Element Method) optimized driver/ Horn design. The "kit" version, ST 25K Neo, is equipped with a metal grille and an inline diverter filter.
The Ground Zero COMPETITION GZCF 6.5 SPL-NEO coaxial speaker set is a 165 mm 2-way coaxial speaker system with pressed paper cone and 28 mm Mylar tweeter. Compared to the GZCF 6.5SPL, the GZCF 6.5 SPL-NEO fits into the Harley-Davidson® Speakerpods without modifications.
Die Diamond MS65 NEO-Lautsprecher bieten spektakuläre Leistung und Klangqualität und sind eine unverzichtbare Ergänzung für Ihr Motorrad.
Das Portfolio an Superhochtönern der Motorsport-Serie besteht aus Standard- und Kurzhornversionen, proprietärer Phase-Plug-Technologie für ultimative Off-Axis-Klangleistung und -Response, flachen Hochtöner-Gehäusen, Schwenkfunktion und flexiblen Montageoptionen für den individuellen Aufbau! Geben Sie sich nicht mit weniger zufrieden, sondern entscheiden Sie sich für die Motorsport-Serie von Diamond Audio für das ultimative Soundsystem-Erlebnis!
Die Diamond Audio MS65NEO 16,5cm Mittelton-Lautsprecher bieten nicht nur eine beeindruckende Leistung, sondern setzen auch auf erstklassige Materialien und Präzision. Mit ihrer Fähigkeit, den Mitteltonbereich in seiner vollen Bandbreite wiederzugeben, verleihen sie deiner Musik eine warme und klare Note. Die Konstruktion ermöglicht eine einfache Integration in das Motorrad, ohne an Klangqualität zu verlieren.
Die Diamond Audio M075T Hochtöner setzen neue Maßstäbe für klare und strahlende Höhen. Mit ihrer kompakten Größe fügen sie sich nahtlos in das Gesamtdesign deines Bikes ein und liefern gleichzeitig einen brillanten Klang. Die Membran sorgt für eine präzise Schallwiedergabe, während die robuste Konstruktion den Herausforderungen der Straße standhält.
Die Diamond Audio DHDRGU Lautsprecher-Gitter bieten nicht nur Schutz, sondern auch einen Hauch von Eleganz. Das Gitterdesign verleiht deinen Lautsprechern einen edlen Look, während gleichzeitig eine optimale Schallausbreitung gewährleistet wird. Die widerstandsfähige Konstruktion schützt vor den Elementen der Straße und verleiht deinem Bike einen individuellen Touch.
Zusammengefasst bietet das Diamond Audio Set passend für Harley-Davidson® nicht nur hochwertige Komponenten, sondern auch ein harmonisches Zusammenspiel für ein unvergleichliches Klangerlebnis auf zwei Rädern. Erlebe die Musik so, wie sie sein soll – kraftvoll, klar und mitreißend. Steigere deine Fahrfreude und hebe dein Fahrerlebnis auf ein neues Level mit diesem einzigartigen Audio-Upgrade.
These speaker adapters enable the subsequent installation of standard speakers.
Totally new NEO SPL coaxial SX 165 NEO cone is made with nature-proof high stiffness pressed-paper featuring innovative water/humidity resistant and anti-UV treatments. The double layer copper voice coil, wound on polyamide former ensures unparalleled power handling. New motors units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance. SX 165 NEO features a large Hi-SPL 1.4” PEI dome tweeter with resettable solid-state protection circuit and a protective rubber gasket for high SPL and a safe outdoor use.
The New SV 165 NEO features compact dimensions and light weight preserving excellent performance thanks to the use of Neodymium N38 H for the motor units. To allow a safe outdoor use without discoloration over time, cones has waterproofing and anti-UV treatment and motor units is painted with cataphoresis with insulated lead-wires to avoid oxidation. The terminals and mounting holes are compatible for installation on Harley-Davidson® motorbikes!
The Ground Zero COMPETITION GZCF 6.5 SPL-NEO coaxial speaker set is a 165 mm 2-way coaxial speaker system with pressed paper cone and 28 mm Mylar tweeter. Compared to the GZCF 6.5SPL, the GZCF 6.5 SPL-NEO fits into the Harley-Davidson® Speakerpods without modifications.
The New SV 165 NEO features compact dimensions and light weight preserving excellent performance thanks to the use of Neodymium N38 H for the motor units. To allow a safe outdoor use without discoloration over time, cones has waterproofing and anti-UV treatment and motor units is painted with cataphoresis with insulated lead-wires to avoid oxidation. The terminals and mounting holes are compatible for installation on Harley-Davidson® motorbikes!
Totally new NEO SPL coaxial SX 165 NEO cone is made with nature-proof high stiffness pressed-paper featuring innovative water/humidity resistant and anti-UV treatments. The double layer copper voice coil, wound on polyamide former ensures unparalleled power handling. New motors units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance. SX 165 NEO features a large Hi-SPL 1.4” PEI dome tweeter with resettable solid-state protection circuit and a protective rubber gasket for high SPL and a safe outdoor use.
The pleasure of riding your Harley-Davidson® is hearing that engine rumble. But when you’re anchored for a ride, the HD14.65 6-1/2″ coaxial speakers serve up your bike’s powerful music. These speakers overcome road noise and do your music justice.
Each fairing speaker kit will come with a Midrange Notch Filter engineered and designed for the best sound when installed with OE speaker pods for 2014 and newer. If for whatever reason, you are not using the speaker pods, it is not required to use included crossover networks.
To get around the complicated job of custom-mounting speakers somewhere in your Harley, we provide you with unique woofer grilles for stylish, easy, efficient install.
The Ground Zero COMPETITION GZCF 6.5 SPL-NEO coaxial speaker set is a 165 mm 2-way coaxial speaker system with pressed paper cone and 28 mm Mylar tweeter. Compared to the GZCF 6.5SPL, the GZCF 6.5 SPL-NEO fits into the Harley-Davidson® Speakerpods without modifications.
A truly powerful sound experience for your Harley-Davidson® awaits you with our speaker set. This exclusive package was specially designed for demanding motorcyclists who are looking for a powerful but clear sound as well as uncomplicated and easy installation. Each component of the set has been carefully selected to deliver a unique combination of clarity, dynamics and bass.
The RZ75H tweeter is by far the best sounding compression horn tweeter suitable for Harley-Davidson® bikes. Velocity designed this tweeter to have a much smoother and wider frequency response than other tweeters with a horn design. The RZ75H tweeter has a design like no other. The unique phase plug (point in the middle), horn flare and diaphragm are optimized to produce sound quality that is significantly superior to other horns on the market. These tweeters offer both extreme volume and wonderful sound without being harsh and dirty. Thanks to the integration directly into a suitable speaker grille, the RZ750H tweeter can be mounted directly in front of a 16.5cm / 6.5" mid-woofer and does not distort the sound.
The new SV 165 NEO features compact dimensions and low weight, while maintaining excellent performance thanks to the use of neodymium N38 H for the motor units. To allow safe outdoor use without discoloration over time, cone has sealing and anti-UV treatment and motor units are painted with cataphoresis with insulated leads to avoid oxidation. The clamps and mounting holes are compatible for installation on Harley-Davidson® motorcycles!
These speaker adapters enable the subsequent installation of standard speakers.
The 6 x 9" Speakerless Saddlebag Lid Kit allows you to add almost any speakers to your factory bag lids. Designed for select 1998 - 2013 Harley-Davidson® Touring with hard saddlebags.
Thanks to the easy-to-install cut and mounting arrangement, you can enjoy the more powerful sound without having to replace saddlebags or worry about painting. The kit includes all hardware and integrated Precision Power grids as well as complete cabling. Not compatible with models with electric locks.
With the high-quality Metra lids, you can retrofit in the side pockets of your Harley-Davidson®, 6x9 inch speakers.
Perfectly designed, the speaker mount fits seamlessly into the Harley-Davidson® and allows for a perfect speaker installation. The cover looks particularly classy due to the high-gloss presentation of the surface.
In the Metra cover fit all oval speakers with the size of 6 x 9 inches, for example, the SX69CX Phoenix Gold. These are securely fastened in the cover with screws.
By using ABS Metra creates a particularly robust and durable product. The plastic is characterized by particularly high resistance to weathering, oils and fats and is very temperature resistant (up to at least 80 ° C).
When delivered, the side-pocket covers are black. If required, they can be varnished as required to achieve a perfect original appearance.
The Ground Zero COMPETITION GZCF 69SPL coaxial speaker set is a 6x9 inch 2-way coaxial speaker system with a paper cone and 25 mm Mylar Tweeter.
SX 690 is a real beast with an Hi-SPL Mid-Hi unit based on 1.4” dome tweeter and 1” dome supertweeter with resettable solid-state protection circuit. Cone are made with nature-proof high stiffness pressed-paper featuring innovative water/humidity resistant and anti-UV treatments. The double layer copper voice coil, wound on polyamide former ensures unparalleled power handling. New motors units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance.
The new Cicada Audio CH69.2 speakers are a perfect solution to fit 2014 and later Harley-Davidson® baggers and other motorcycles.
These are 2 ohm speakers so you get more power from smaller, higher efficiency/lower powered amps and you don't need a huge amp to drive these properly. For every 500 watts you need 58 amps of electricity! So use higher sensitivity speakers (like our Cicada CoAx Horns speakers) and lower powered/lower power amplifiers to get the sound you deserve. Get maximum performance from your current headunit or NEW Cicada amp without having to do anything other than upgrade to these speakers.
Designed and built to fit HARLEY-DAVIDSON®!
The Ground Zero COMPETITION GZCF 69SPL coaxial speaker set is a 6x9 inch 2-way coaxial speaker system with a paper cone and 25 mm Mylar Tweeter.
SX 690 is a real beast with an Hi-SPL Mid-Hi unit based on 1.4” dome tweeter and 1” dome supertweeter with resettable solid-state protection circuit. Cone are made with nature-proof high stiffness pressed-paper featuring innovative water/humidity resistant and anti-UV treatments. The double layer copper voice coil, wound on polyamide former ensures unparalleled power handling. New motors units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance.
The new Cicada Audio CH69.2 speakers are a perfect solution to fit 2014 and later Harley-Davidson® baggers and other motorcycles.
These are 2 ohm speakers so you get more power from smaller, higher efficiency/lower powered amps and you don't need a huge amp to drive these properly. For every 500 watts you need 58 amps of electricity! So use higher sensitivity speakers (like our Cicada CoAx Horns speakers) and lower powered/lower power amplifiers to get the sound you deserve. Get maximum performance from your current headunit or NEW Cicada amp without having to do anything other than upgrade to these speakers.
Designed and built to fit HARLEY-DAVIDSON®!
The EVOX2 series from SounDigital is the most powerful amplifier series in the manufacturer's portfolio. It is based on the groundbreaking technologies of the EVO series and supplements them with further state-of-the-art features. With incredible and further increased amplifier performance, in a super compact design with the highest quality components.
The EVOX2 series features more robust and reliable transistors that guarantee significantly better performance and higher power consumption when needed most.
EVOX2 series technology provides better heat dissipation efficiency and product performance. This ensures a significantly cooler operating temperature and reliability.
The amplifiers have an intelligent power supply that monitors the power level at the amplifier outputs, ensuring better control, stability and efficiency.
The improved RCA connectors ensure significantly better signal quality and noise reduction.
By introducing a new microcontroller with state-of-the-art technology, the performance of the power supply and output circuits is monitored accurately, quickly and reliably.
The Soundidigtal EVOX2 series from Sounddigital is characterized by the following technologies:
The DTR is a dynamic heat exchange system that reduces the temperature of the components by accelerating the heat exchange of the electronic components with the heat sink, thus always maintaining high efficiency.
SounDigital uses a new PCB suspension on the EVOX2 series, which acts like a damper and reduces the effects of vibration on the electronic board, thereby increasing the lifespan and reliability of the EVO-X amplifiers. Unlike other amplifiers, the EVO-X series is ideal for use in motorcycles or quad/ATV/powersports.
An intelligent layout, with optimal use of the circuit board area and the use of modern components with small dimensions guarantee SounDigital products a compact design, while at the same time being robust and with excellent thermal efficiency.
SounDigital amplifiers are known for their low battery consumption, and this feature has been improved on the EVOX2 Line. The modern E-POWER SUPPLY replaces the previously common toroidal core transformers with a new generation of "EE" core transformers with an efficiency of over 90% *, which enables our customers to listen to music for longer periods of time without having to recharge the battery.
*Efficiency only measured on the power supply
The EVOX2 series from SounDigital is the most powerful amplifier series in the manufacturer's portfolio. It is based on the groundbreaking technologies of the EVO series and supplements them with further state-of-the-art features. With incredible and further increased amplifier performance, in a super compact design with the highest quality components.
The EVOX2 series features more robust and reliable transistors that guarantee significantly better performance and higher power consumption when needed most.
EVOX2 series technology provides better heat dissipation efficiency and product performance. This ensures a significantly cooler operating temperature and reliability.
The amplifiers have an intelligent power supply that monitors the power level at the amplifier outputs, ensuring better control, stability and efficiency.
The improved RCA connectors ensure significantly better signal quality and noise reduction.
By introducing a new microcontroller with state-of-the-art technology, the performance of the power supply and output circuits is monitored accurately, quickly and reliably.
The Soundidigtal EVOX2 series from Sounddigital is characterized by the following technologies:
The DTR is a dynamic heat exchange system that reduces the temperature of the components by accelerating the heat exchange of the electronic components with the heat sink, thus always maintaining high efficiency.
SounDigital uses a new PCB suspension on the EVOX2 series, which acts like a damper and reduces the effects of vibration on the electronic board, thereby increasing the lifespan and reliability of the EVO-X amplifiers. Unlike other amplifiers, the EVO-X series is ideal for use in motorcycles or quad/ATV/powersports.
An intelligent layout, with optimal use of the circuit board area and the use of modern components with small dimensions guarantee SounDigital products a compact design, while at the same time being robust and with excellent thermal efficiency.
SounDigital amplifiers are known for their low battery consumption, and this feature has been improved on the EVOX2 Line. The modern E-POWER SUPPLY replaces the previously common toroidal core transformers with a new generation of "EE" core transformers with an efficiency of over 90% *, which enables our customers to listen to music for longer periods of time without having to recharge the battery.
*Efficiency only measured on the power supply
The SP 4.500 is the first Hertz amplifier with the revised Hertz ADC (Advanced D-Class) output stage, which achieves an efficiency of up to 85% and an impressive output of 90 x 4 (4Ω) W RMS or 300 W x 2 (4Ω) W RMS in a bridge configuration, in an ultra-compact size of 192.7 x 130 x 49 mm. An ultra-compact system with impressive performance, the SP 4.500 is the ideal choice for motorcycle applications, as well as under-seat installations in sports cars and behind the seats in trucks.
Hertz ADC technology ensures that the SP 4,500 exceeds the usual ultra-compact amplifier performances, delivers an excellent S/N ratio of 100 dBA and 0.02% THD specifications, and almost completely eliminates EMI and RFI noise with the Result of an incomparable sound quality. This versatility is perfect for driving high-performance front speakers (4Ω) with a bridged (4Ω) subwoofer. The SP 4.500 is fully protected against overheating and direct current (DC) at the output and immediately switches to protection mode (red LED lights up) to protect your speaker system.
The IP55-certified aluminum housing offers maximum protection against moisture and external agents, the lack of an internal fan prevents the accumulation of dirt inside. The main circuit board of the SP 4.500 features a conformal coating to prevent damage from internal condensation, a condition that can occur when warm, humid air hits the amplifier enclosure at a lower temperature.
The SP 4.500 features an integrated sealed power cable, line inputs and speaker outputs for a safe motorcycle application, providing a secure power supply even in the worst weather conditions. The solid power supply harness ensures an ultra-stable power and ground connection and prevents contact loss due to vibration. Because of its special design, the SP 4.500 is the ultimate option for motorcycle, marine and powersports applications.
Versatile crossover filters and control knobs are all on one side for easy calibration or adjustment once the power amp is installed.
The filter section includes extremely flexible high-pass and low-pass crossovers, adjustable from 50 Hz to 5 kHz with 12 dB/oct. edge steepness. Together with a bass boost control (45 Hz, 0÷8 dB) they allow both front channels to be configured for full range operation or for use with a subwoofer and associated speakers.
The high-pass crossover can also be used to optimize the performance of the highly efficient SPL Show NEO coaxial speakers, the perfect partners for the SP 4.500.
Die EVOX2-Serie von SounDigital bildet die leistungsstärkste Verstärkerserie im Portfolio des Herstellers. Sie beruht auf den bahnbrechenden Technologien der EVO-Serie und ergänzt diese mit weiteren Features auf dem aktuellsten Stand der Technik. Mit einer unglaublichen und weiter erhöhten Verstärkerleistung, in einem super kompakten Design mit den hochwertigsten Komponenten.
Die EVOX2-Serie besitzt robustere und zuverlässigere Transistoren, die eine wesentlich bessere Leistung und einen höheren Leistungsbedarf garantieren, wenn sie am meisten gebraucht werden.
Die Technologie der EVOX2-Serie bietet eine bessere Effizienz und Produktleistung bei der Wärmeableitung. Dadurch ist eine deutlich kühlere Betriebstemperatur und Zuverlässigkeit gewährleistet.
Die Verstärker besitzen eine ntelligente Stromversorgung, die den Leistungspegel an den Verstärkerausgängen überwacht und so eine bessere Kontrolle, Stabilität und Effizienz garantiert.
Die verbesserten RCA-Stecker stehen für eine wesentlich bessere Signalqualität und Rauschunterdrückung.
Durch die Einführung eines neuen Mikrocontrollers mit modernster Technologie, wird die Leistung der Stromversorgungs- und Ausgangsschaltungen genau, schnell und zuverlässig überwacht.
Folgende Technologien zeichnet die Soundidigtal EVOX2-Serie von Soundigital aus:
Das DTR ist ein dynamisches Wärmeaustauschsystem, das durch die Beschleunigung des Wärmeaustauschs der elektronischen Komponenten mit dem Kühlkörper die Temperatur der Komponenten reduziert und so stets einen hohen Wirkungsgrad beibehält.
SounDigital setzt bei der EVOX2-Serie eine neue Leiterplattenaufhängung ein, die wie ein Dämpfer wirkt, und die Auswirkungen von Vibrationen auf die Elektronikplatine reduziert und so die Lebensdauer und Zuverlässigkeit der EVO-X Verstärker erhöht. Anders als andere Verstärker ist die EVO-X Serie dadurch für den Einsatz in Motorrädern oder Quad/ ATV/ Powersports optimal geeignet.
Ein intelligentes Layout, mit einer optimalen Ausnutzung der Leiterplatten-Fläche und die Verwendung von modernen Komponenten mit geringen Abmaßen garantieren SounDigital-Produkten ein kompaktes Design, sind gleichzeitig robust und mit hervorragendem thermischem Wirkungsgrad.
SounDigital-Verstärker sind bekannt für ihren geringen Batterieverbrauchs bekannt, und diese Eigenschaft wurde der EVOX2 Line verbessert. Das moderne E-POWER SUPPLY ersetzt die bisher üblichen Ringkerntransformatoren durch eine neue Generation von "E-E" Kerntransformatoren mit einem Wirkungsgrad von über 90% *, was für unsere Kunden längeres Musikhören im Stand ermöglicht, ohne die Batterie nachladen zu müssen.
*Wirkungsgrad nur am Netzteil gemessen
The SP 4.900 is the first Hertz output stage with the renewed Hertz ADC output stage (Advanced D-Class), which achieves an efficiency of up to 85% and an impressive power rating of 160 x 4 (4 Ω) W RMS or bridged 500 x 2 (4 Ω) W RMS with an ultra-compact size of 8.3 x 5.1 (inche). The ultra-compact SP 4.900 with impressive performance is the ideal choice for motorcycle applications and for mounting under seats in sports cars and installations in trucks.
Hertz ADC technology ensures that the SP 4,900 exceeds the usual ultra-compact amplifier performances, delivers an excellent S/N ratio of 105 dBA and 0.02% THD specifications, and almost completely eliminates EMI and RFI noise with the Result of an incomparable sound quality. This versatility is perfect for driving high-performance front speakers (4Ω) with a bridged (4Ω) subwoofer. The SP 4.900 is fully protected against overheating and direct current (DC) at the output and immediately switches to protection mode (red LED lights up) to protect your loudspeaker system.
The IP55-certified aluminum housing offers maximum protection against moisture and external agents, the lack of an internal fan prevents the accumulation of dirt inside. The main circuit board of the SP 4.900 features a conformal coating to prevent damage from internal condensation, a condition that can occur when warm, humid air hits the amplifier enclosure at a lower temperature.
The SP 4.900 features an integrated sealed power cable, line inputs and speaker outputs for a safe motorcycle application, providing a secure power supply even in the worst weather conditions. The solid power supply harness ensures an ultra-stable power and ground connection and prevents contact loss due to vibration. Because of its special design, the SP 4.900 is the ultimate option for motorcycle, marine and powersports applications.
Versatile crossover filters and control knobs are all on one side for easy calibration or adjustment once the power amp is installed.
The filter section includes extremely flexible high-pass and low-pass crossovers, adjustable from 50 Hz to 5 kHz with 12 dB/oct. edge steepness. Together with a bass boost control (45 Hz, 0÷8 dB) they allow both front channels to be configured for full range operation or for use with a subwoofer and associated speakers.
The high-pass crossover can also be used to optimize the performance of the highly efficient SPL Show NEO coaxial speakers, the perfect partners for the SP 4.900.
The EVOX2 series from SounDigital is the most powerful amplifier series in the manufacturer's portfolio. It is based on the groundbreaking technologies of the EVO series and supplements them with further state-of-the-art features. With incredible and further increased amplifier performance, in a super compact design with the highest quality components.
The EVOX2 series features more robust and reliable transistors that guarantee significantly better performance and higher power consumption when needed most.
EVOX2 series technology provides better heat dissipation efficiency and product performance. This ensures a significantly cooler operating temperature and reliability.
The amplifiers have an intelligent power supply that monitors the power level at the amplifier outputs, ensuring better control, stability and efficiency.
The improved RCA connectors ensure significantly better signal quality and noise reduction.
By introducing a new microcontroller with state-of-the-art technology, the performance of the power supply and output circuits is monitored accurately, quickly and reliably.
The Soundidigtal EVOX2 series from Sounddigital is characterized by the following technologies:
The DTR is a dynamic heat exchange system that reduces the temperature of the components by accelerating the heat exchange of the electronic components with the heat sink, thus always maintaining high efficiency.
SounDigital uses a new PCB suspension on the EVOX2 series, which acts like a damper and reduces the effects of vibration on the electronic board, thereby increasing the lifespan and reliability of the EVO-X amplifiers. Unlike other amplifiers, the EVO-X series is ideal for use in motorcycles or quad/ATV/powersports.
An intelligent layout, with optimal use of the circuit board area and the use of modern components with small dimensions guarantee SounDigital products a compact design, while at the same time being robust and with excellent thermal efficiency.
SounDigital amplifiers are known for their low battery consumption, and this feature has been improved on the EVOX2 Line. The modern E-POWER SUPPLY replaces the previously common toroidal core transformers with a new generation of "EE" core transformers with an efficiency of over 90% *, which enables our customers to listen to music for longer periods of time without having to recharge the battery.
*Efficiency only measured on the power supply
The BC-AMP05 Amplifier Mounting Plate suitable for Harley-Davidson® Road Glide™ FLT installs into the front fairing and can be mounted on the clutch or brake side of the main fairing mounting bolts. The mounting plate, Velcro tape and cable ties are included.
The mounting plate is made of black, powder-coated steel and has slots on the outer edge to allow the amplifier's wiring to be secured using the included cable ties.
This mounting plate is small enough to fit into limited panel space and is intended to be paired with a micro amplifier. We recommend amplifiers with dimensions of 11.4 x 20 x 3.8 cm.
This product is compatible with the Metra 95-HDIF2 replacement fairing suitable for Harley-Davidson® Road Glide™ FLT/Sharknose.
Die EVOX2-Serie von SounDigital bildet die leistungsstärkste Verstärkerserie im Portfolio des Herstellers. Sie beruht auf den bahnbrechenden Technologien der EVO-Serie und ergänzt diese mit weiteren Features auf dem aktuellsten Stand der Technik. Mit einer unglaublichen und weiter erhöhten Verstärkerleistung, in einem super kompakten Design mit den hochwertigsten Komponenten.
Die EVOX2-Serie besitzt robustere und zuverlässigere Transistoren, die eine wesentlich bessere Leistung und einen höheren Leistungsbedarf garantieren, wenn sie am meisten gebraucht werden.
Die Technologie der EVOX2-Serie bietet eine bessere Effizienz und Produktleistung bei der Wärmeableitung. Dadurch ist eine deutlich kühlere Betriebstemperatur und Zuverlässigkeit gewährleistet.
Die Verstärker besitzen eine ntelligente Stromversorgung, die den Leistungspegel an den Verstärkerausgängen überwacht und so eine bessere Kontrolle, Stabilität und Effizienz garantiert.
Die verbesserten RCA-Stecker stehen für eine wesentlich bessere Signalqualität und Rauschunterdrückung.
Durch die Einführung eines neuen Mikrocontrollers mit modernster Technologie, wird die Leistung der Stromversorgungs- und Ausgangsschaltungen genau, schnell und zuverlässig überwacht.
Folgende Technologien zeichnet die Soundidigtal EVOX2-Serie von Soundigital aus:
Das DTR ist ein dynamisches Wärmeaustauschsystem, das durch die Beschleunigung des Wärmeaustauschs der elektronischen Komponenten mit dem Kühlkörper die Temperatur der Komponenten reduziert und so stets einen hohen Wirkungsgrad beibehält.
SounDigital setzt bei der EVOX2-Serie eine neue Leiterplattenaufhängung ein, die wie ein Dämpfer wirkt, und die Auswirkungen von Vibrationen auf die Elektronikplatine reduziert und so die Lebensdauer und Zuverlässigkeit der EVO-X Verstärker erhöht. Anders als andere Verstärker ist die EVO-X Serie dadurch für den Einsatz in Motorrädern oder Quad/ ATV/ Powersports optimal geeignet.
Ein intelligentes Layout, mit einer optimalen Ausnutzung der Leiterplatten-Fläche und die Verwendung von modernen Komponenten mit geringen Abmaßen garantieren SounDigital-Produkten ein kompaktes Design, sind gleichzeitig robust und mit hervorragendem thermischem Wirkungsgrad.
SounDigital-Verstärker sind bekannt für ihren geringen Batterieverbrauchs bekannt, und diese Eigenschaft wurde der EVOX2 Line verbessert. Das moderne E-POWER SUPPLY ersetzt die bisher üblichen Ringkerntransformatoren durch eine neue Generation von "E-E" Kerntransformatoren mit einem Wirkungsgrad von über 90% *, was für unsere Kunden längeres Musikhören im Stand ermöglicht, ohne die Batterie nachladen zu müssen.
*Wirkungsgrad nur am Netzteil gemessen
The SP 4.500 is the first Hertz amplifier with the revised Hertz ADC (Advanced D-Class) output stage, which achieves an efficiency of up to 85% and an impressive output of 90 x 4 (4Ω) W RMS or 300 W x 2 (4Ω) W RMS in a bridge configuration, in an ultra-compact size of 192.7 x 130 x 49 mm. An ultra-compact system with impressive performance, the SP 4.500 is the ideal choice for motorcycle applications, as well as under-seat installations in sports cars and behind the seats in trucks.
Hertz ADC technology ensures that the SP 4,500 exceeds the usual ultra-compact amplifier performances, delivers an excellent S/N ratio of 100 dBA and 0.02% THD specifications, and almost completely eliminates EMI and RFI noise with the Result of an incomparable sound quality. This versatility is perfect for driving high-performance front speakers (4Ω) with a bridged (4Ω) subwoofer. The SP 4.500 is fully protected against overheating and direct current (DC) at the output and immediately switches to protection mode (red LED lights up) to protect your speaker system.
The IP55-certified aluminum housing offers maximum protection against moisture and external agents, the lack of an internal fan prevents the accumulation of dirt inside. The main circuit board of the SP 4.500 features a conformal coating to prevent damage from internal condensation, a condition that can occur when warm, humid air hits the amplifier enclosure at a lower temperature.
The SP 4.500 features an integrated sealed power cable, line inputs and speaker outputs for a safe motorcycle application, providing a secure power supply even in the worst weather conditions. The solid power supply harness ensures an ultra-stable power and ground connection and prevents contact loss due to vibration. Because of its special design, the SP 4.500 is the ultimate option for motorcycle, marine and powersports applications.
Versatile crossover filters and control knobs are all on one side for easy calibration or adjustment once the power amp is installed.
The filter section includes extremely flexible high-pass and low-pass crossovers, adjustable from 50 Hz to 5 kHz with 12 dB/oct. edge steepness. Together with a bass boost control (45 Hz, 0÷8 dB) they allow both front channels to be configured for full range operation or for use with a subwoofer and associated speakers.
The high-pass crossover can also be used to optimize the performance of the highly efficient SPL Show NEO coaxial speakers, the perfect partners for the SP 4.500.
Die EVOX2-Serie von SounDigital bildet die leistungsstärkste Verstärkerserie im Portfolio des Herstellers. Sie beruht auf den bahnbrechenden Technologien der EVO-Serie und ergänzt diese mit weiteren Features auf dem aktuellsten Stand der Technik. Mit einer unglaublichen und weiter erhöhten Verstärkerleistung, in einem super kompakten Design mit den hochwertigsten Komponenten.
Die EVOX2-Serie besitzt robustere und zuverlässigere Transistoren, die eine wesentlich bessere Leistung und einen höheren Leistungsbedarf garantieren, wenn sie am meisten gebraucht werden.
Die Technologie der EVOX2-Serie bietet eine bessere Effizienz und Produktleistung bei der Wärmeableitung. Dadurch ist eine deutlich kühlere Betriebstemperatur und Zuverlässigkeit gewährleistet.
Die Verstärker besitzen eine ntelligente Stromversorgung, die den Leistungspegel an den Verstärkerausgängen überwacht und so eine bessere Kontrolle, Stabilität und Effizienz garantiert.
Die verbesserten RCA-Stecker stehen für eine wesentlich bessere Signalqualität und Rauschunterdrückung.
Durch die Einführung eines neuen Mikrocontrollers mit modernster Technologie, wird die Leistung der Stromversorgungs- und Ausgangsschaltungen genau, schnell und zuverlässig überwacht.
Folgende Technologien zeichnet die Soundidigtal EVOX2-Serie von Soundigital aus:
Das DTR ist ein dynamisches Wärmeaustauschsystem, das durch die Beschleunigung des Wärmeaustauschs der elektronischen Komponenten mit dem Kühlkörper die Temperatur der Komponenten reduziert und so stets einen hohen Wirkungsgrad beibehält.
SounDigital setzt bei der EVOX2-Serie eine neue Leiterplattenaufhängung ein, die wie ein Dämpfer wirkt, und die Auswirkungen von Vibrationen auf die Elektronikplatine reduziert und so die Lebensdauer und Zuverlässigkeit der EVO-X Verstärker erhöht. Anders als andere Verstärker ist die EVO-X Serie dadurch für den Einsatz in Motorrädern oder Quad/ ATV/ Powersports optimal geeignet.
Ein intelligentes Layout, mit einer optimalen Ausnutzung der Leiterplatten-Fläche und die Verwendung von modernen Komponenten mit geringen Abmaßen garantieren SounDigital-Produkten ein kompaktes Design, sind gleichzeitig robust und mit hervorragendem thermischem Wirkungsgrad.
SounDigital-Verstärker sind bekannt für ihren geringen Batterieverbrauchs bekannt, und diese Eigenschaft wurde der EVOX2 Line verbessert. Das moderne E-POWER SUPPLY ersetzt die bisher üblichen Ringkerntransformatoren durch eine neue Generation von "E-E" Kerntransformatoren mit einem Wirkungsgrad von über 90% *, was für unsere Kunden längeres Musikhören im Stand ermöglicht, ohne die Batterie nachladen zu müssen.
*Wirkungsgrad nur am Netzteil gemessen
The SP 4.900 is the first Hertz output stage with the renewed Hertz ADC output stage (Advanced D-Class), which achieves an efficiency of up to 85% and an impressive power rating of 160 x 4 (4 Ω) W RMS or bridged 500 x 2 (4 Ω) W RMS with an ultra-compact size of 8.3 x 5.1 (inche). The ultra-compact SP 4.900 with impressive performance is the ideal choice for motorcycle applications and for mounting under seats in sports cars and installations in trucks.
Hertz ADC technology ensures that the SP 4,900 exceeds the usual ultra-compact amplifier performances, delivers an excellent S/N ratio of 105 dBA and 0.02% THD specifications, and almost completely eliminates EMI and RFI noise with the Result of an incomparable sound quality. This versatility is perfect for driving high-performance front speakers (4Ω) with a bridged (4Ω) subwoofer. The SP 4.900 is fully protected against overheating and direct current (DC) at the output and immediately switches to protection mode (red LED lights up) to protect your loudspeaker system.
The IP55-certified aluminum housing offers maximum protection against moisture and external agents, the lack of an internal fan prevents the accumulation of dirt inside. The main circuit board of the SP 4.900 features a conformal coating to prevent damage from internal condensation, a condition that can occur when warm, humid air hits the amplifier enclosure at a lower temperature.
The SP 4.900 features an integrated sealed power cable, line inputs and speaker outputs for a safe motorcycle application, providing a secure power supply even in the worst weather conditions. The solid power supply harness ensures an ultra-stable power and ground connection and prevents contact loss due to vibration. Because of its special design, the SP 4.900 is the ultimate option for motorcycle, marine and powersports applications.
Versatile crossover filters and control knobs are all on one side for easy calibration or adjustment once the power amp is installed.
The filter section includes extremely flexible high-pass and low-pass crossovers, adjustable from 50 Hz to 5 kHz with 12 dB/oct. edge steepness. Together with a bass boost control (45 Hz, 0÷8 dB) they allow both front channels to be configured for full range operation or for use with a subwoofer and associated speakers.
The high-pass crossover can also be used to optimize the performance of the highly efficient SPL Show NEO coaxial speakers, the perfect partners for the SP 4.900.
The EVOX2 series from SounDigital is the most powerful amplifier series in the manufacturer's portfolio. It is based on the groundbreaking technologies of the EVO series and supplements them with further state-of-the-art features. With incredible and further increased amplifier performance, in a super compact design with the highest quality components.
The EVOX2 series features more robust and reliable transistors that guarantee significantly better performance and higher power consumption when needed most.
EVOX2 series technology provides better heat dissipation efficiency and product performance. This ensures a significantly cooler operating temperature and reliability.
The amplifiers have an intelligent power supply that monitors the power level at the amplifier outputs, ensuring better control, stability and efficiency.
The improved RCA connectors ensure significantly better signal quality and noise reduction.
By introducing a new microcontroller with state-of-the-art technology, the performance of the power supply and output circuits is monitored accurately, quickly and reliably.
The Soundidigtal EVOX2 series from Sounddigital is characterized by the following technologies:
The DTR is a dynamic heat exchange system that reduces the temperature of the components by accelerating the heat exchange of the electronic components with the heat sink, thus always maintaining high efficiency.
SounDigital uses a new PCB suspension on the EVOX2 series, which acts like a damper and reduces the effects of vibration on the electronic board, thereby increasing the lifespan and reliability of the EVO-X amplifiers. Unlike other amplifiers, the EVO-X series is ideal for use in motorcycles or quad/ATV/powersports.
An intelligent layout, with optimal use of the circuit board area and the use of modern components with small dimensions guarantee SounDigital products a compact design, while at the same time being robust and with excellent thermal efficiency.
SounDigital amplifiers are known for their low battery consumption, and this feature has been improved on the EVOX2 Line. The modern E-POWER SUPPLY replaces the previously common toroidal core transformers with a new generation of "EE" core transformers with an efficiency of over 90% *, which enables our customers to listen to music for longer periods of time without having to recharge the battery.
*Efficiency only measured on the power supply
With Roadkill Ultimate, Stinger combines the advantages of alubutyl and acoustic foam in one product. This saves you a step when previously laying 2 individual layers. Roadkill Ultimate provides additional isolation and noise dampening against unwanted resonance noise, vibration, road noise, engine noise etc.
The Roadkill Ultimate Material ensures clear and clean music enjoyment with the following components:
Outer layer: Acoustic foam for absorbing and diffusing high-frequency sounds and as a thermal barrier. It also absorbs sound waves that would otherwise be trapped behind the door panels.
Middle layer: aluminum for heat dissipation
Inner Layer: Proprietary ultra-dense butyl compound absorbs unwanted acoustic energy to eliminate noise and reduce vibration
With Roadkill Ultimate, Stinger combines the advantages of aluminum and acoustic foam in one product. This saves you a step in the laying of 2 individual layers. Roadkill Ultimate provides additional isolation and noise reduction against unwanted resonance, vibration, road noise, engine noise, etc.
The Roadkill Ultimate material provides the following components for a clear and clean music pleasure:
Sie zahlen 200 EUR bestehend aus 170 EUR Kaution + 30 EUR Mietkosten. Sobald Sie das Gerät innerhalb von 7 Tagen nach Erhalt zurückgesendet haben und dieses auf Funktion & Vollständigkeit überprüft wurde, erhalten Sie den Kautionsbetrag in Höhe von 170 EUR wieder zurücküberwiesen.
Holen Sie das Optimum aus Ihrem SoundSystem, verschenken Sie kein Potential und ermitteln Sie den verzerrungsfreien Maximalpegel Ihres SoundSystems so dass Sie lange Freude an Ihren Lautsprechern haben!
Mit dem SMD DD-1 stellen sie jedes AudioSystem verzerrungsfrei ein – ganz egal ob es das SoundUpgrade für Ihr Auto, das maxxcount SoundKit passend für Ihre Harley-Davidson® oder Ihr Marine-Soundsystem ist!
Der SMD DD-1 wurde speziell für die Einstellung von Audio-Quellen und Verstärkern entwickelt. Anhand einer LED signalisiert er ganz präzise kritische Verzerrungen (Clipping) im Audiosignal. So kann man sicherstellen, dass alle Audio-Komponenten in der Kette - angefangen von der Signalquelle bis hin zum Verstärker - ein unverzerrtes Signal liefern und so die Lautsprecher vor Beschädigung geschützt werden.
Beim Clipping (übersteuern) entsteht eine Gleichspannung, die zum Stillstand der Schwingspule des Lautsprechers führt, damit fehlt dieser die nötige Kühlung und die Schwingspule brennt durch.
Nebe der Kalibrierung per USB-Stick besteht auch die Möglichkeit per Smartphone diese vorzunehmen, hierzu stellen wir die Testtöne in unserem Download-Reiter zur Verfügung.
Get the most out of your aftermarket Harley-Davidson® amplifier and speaker installation with the DD-1 Audio Programmer.
The Detector is an audio module designed specifically for your Harley-Davidson® that works directly with the factory six-pin diagnostic connector. In a few short steps, the DD-1 provides simple on-screen instructions to optimize your factory radio for the peak performance of your amplifier and speakers.
You get dramatically improved sound quality and performance, fader control (not applicable in Boom 2 systems), and even view/reset diagnostic codes!
Technical data: