Customer Hotline
+49 (0)351 871 8222
Einkaufsoptionen
METRA
- 124,90 €Incl. 19% VAT.
Metra BC-9704 Amplifier Connection Set suitable for Harley-Davidson® FLH & FLT from 1998- Single or dual amp installation harness
- Oxygen-free copper wiring for better conductivity and performance
- 25mm² / 4GA OFC power and ground wires
- Distribution block to (2) 4GA power and ground wires
- 4ft Zip-tie for wire routing included
- 1998-2013 charge port T-harness, hardwired remote turn-on
- 2014-UP 2-pin plug in T-harness for accessory turn-on
124,90 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A22791Delivery Time 1 - 4 Days* - 99,99 €Incl. 19% VAT.
Metra BC-AMP01 Amplifier Mounting Bracket suitable for Harley-Davidson® Touring with hard saddlebags- Suitable for all Harley-Davidson® Touring Models with hard saddlebags
- No drilling required
- Steel construction with UV powder coating
- Pre-drilled for Metra PowerSports Amps (MPS-AMP60×4, MPS-AMP100×2 or MPS-AMP200-2D)
- Works with most other micro amps
- Molded carpet cover for protection and a clean look
99,99 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A20253Delivery Time 1 - 4 Days* - 99,99 €Incl. 19% VAT.
Metra BC-AMP02 Amplifier Mounting Bracket suitable for Harley-Davidson® 1998-2013 with Batwing Fairing- Suitable for Harley-Davidson® Touring Models / Street Glide™ (Batwing Fairing)
- No Drilling Required
- Steel Construction with UV powder coating.
- Pre-drilled hole for Metra Powersports Amps (MPS-AMP60×4, MPS-AMP100×2, MPS-AMP200-2D, MPS-AMP125-4D, MPS-AMP850-5D)
- Works with most other Micro amps
- Allows installation of 2 MPS Amplifiers (drilling required for 2nd mount)
99,99 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A20254Delivery Time 1 - 4 Days* - 99,99 €Incl. 19% VAT.
Metra BC-AMP03 Amplifier Mounting Bracket suitable for Harley-Davidson® 1998-2013 with Batwing Fairing- Suitable for Harley-Davidson® Touring Models Street Glide™ (Batwing Fairing)
- Steel construction with UV powder coating
- Can also be used to mount amplifier (drilling required)
99,99 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A20255Delivery Time 8 - 11 Days* - 99,00 €Incl. 19% VAT.
Metra BC-AMP06 Amp Bracket Kit for Harley-Davidson® Street Glide™ 2014+- Suitable for all Harley-Davidson® Street Glide™ from 2014
- Steel construction with UV powder coating
- Uses OE bolts for mounting
- OE harness mounting points
- Multiple zip tie location to secure wire to bracket
- Velcro pad included
99,00 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A22365Delivery Time 1 - 4 Days* - 99,00 €Incl. 19% VAT.
Metra BC-AMP04 Amplifier Mounting Bracket suitable for Harley-Davidson® Road Glide™ from 2015- Suitable for Harley-Davidson® Road Glide™ 2015 – Up
- No drilling required
- Steel construction with UV powder coating
- Pre-drilled for Metra PowerSports Amps (MPS-AMP60×4, MPS-AMP100×2 or MPS-AMP200-2D)
- Works with most other micro amps
- Note: Requires four 1/4-20 Bolts 3/4in. long (not supplied) to attach
99,00 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A20256Delivery Time 1 - 4 Days* - 99,00 €Incl. 19% VAT.
Metra BC-AMP05 Amplifier Mounting bracket suitable for Harley-Davidson® Road Glide™ 1998-2013- Suitable for Harley-Davidson® Road Glide™ 1998-2013
- Steel construction with UV powder coating
- Uses OE screws for attachment
- Two mounting options – Left or right of stay bracket
- Multiple cable ties to secure cables to the mount
- Includes Velcro pad
99,00 €Incl. 19% VAT.Delivery Cost 6,49 € in Dtl.A23608Delivery Time 11 - 14 Days*
