PAC AP4-TY11 AmpPRO Audio Interface for Toyota 2001-2015

PAC AP4-TY11 AmpPRO Audio Interface for Toyota 2001-2015

The PAC AP4-TY11 interface provides an easy installation and integration of additional amplifiers for sound systems with data bus in vehicles. AmpPRO improves the sound, while preserving the look, feel and features of the original radio!

Configuration scheme - Plug&Play

Note: Only for vehicles with data bus controlled Premium Sound Systemy

The interface is suitable for vehicles with data bus controlled Premium Sound System from Alpine, Bose, Beats or Harmon Kardon. Check this using the markings on the speakers / subwoofers. Or check whether center speakers or subwoofers are installed.

Variable settings for volume, fading, bass, mid and high frequencies

The audio settings are made with the AmpPRO PC App. Via Micro-USB interface you can set user friendly volume, equalizer, frequencies for bass / midrange / treble and Q-factors. The minimum volume of the factory radio can also be set.

3-Band-EQ (App) - Technical details

• Bass: 60Hz, 80Hz, 100Hz oder 120Hz
• Mids: 500Hz, 1kHz, 1,5kHz oder 2,5kHz
• High: 7,5kHz, 10kHz, 12,5kHz oder 15kHz

You can also update the firmware via the USB port.

5-Volt-RMS-Output (Root Mean Square)

The AmpPRO provides directly from the wiring harness Cinch-Connectors for front, rear and subwoofer outputs . Connect the amplifier without detours or further work steps.

With Volume-Knob for Subwoofer

A knob is included for easy subwoofer level adjustment . If you already have a control for the subwoofer, you can of course continue to use it.

Easy Plug&Play-Installation

The AmpPRO is installed between the radio and the amplifier. Two LEDs provide feedback on the current operating mode. Features such as Warning, uConnect and Bluetooth audio are retained.

Optional

• For vehicles with TOSLINK DSP or TOSLINK repeaters, add the: PAC APA-TOS1 Add-On (see Accessories)

Power amplifiers, loudspeakers, subwoofers and accessories can be found in the shop.