PAC MCI-FD22 Multi-Camera Interface (Front / Rear / Side Cameras) for Ford Transit & F150 from 2015

PAC MCI-FD22 Multi-Camera Interface (Front / Rear / Side Cameras) for Ford Transit & F150 from 2015

Protect yourself and the people around you with significantly improved visibility against blind spots when changing lanes or parking! The MCI-FD22 Multi-Camera Interface allows the connection of up to 4 cameras and the automatic activation of side and factory rear-view camera.

Camera interface for up to 4 cameras

Depending on the purpose of use, you can connect a maximum of 4 (front, side, grille, roof, installation, body, etc.) cameras to the PAC MCI-FD22 .

Automatic activation of side and factory rear view cameras possible

The side cameras and / or factory rear-view camera automatically switch on when the reverse gear is flashing or engaged, if this is set using the DIP switch.

Display and manual switching in the factory display

In addition to automatically enabling camera images, you can also manually switch between all camera images in the factory display.

Pre-programmed settings selectable via DIP switch

By means of the DIP switches on the MCI interface, you determine that, for example, the factory rear view camera is automatically activated with reverse gear, or that the side cameras show the "blind spot" when they flash at a minimum of 20mph.

Settings configurable via PC app

Instead of preprogrammed profiles, you can also customize your settings. This is conveniently possible via the Windows app on the PC. You can also keep the interface software up to date.

Integrated signal filter against image interference

Vehicles of recent date use for the power supply of the vehicle exterior lighting (tail light, brake light, etc.) a pulsed (pulsating) voltage, which is unsuitable for image sensors / video electronics and functional or image disturbances result. The signal filter buffers accordingly, thus ensuring a trouble-free image.

Simple Plug & Plug installation

The interface is clamped between the cameras (via RCA) and the vehicle or display connections. Before installation, only the desired DIP switch position or the configuration must be made on the PC.