Versandkosten: 4,99 €
Our ingeniously simple reversing cameras can be easily installed by exchanging a handlebar trough - a retrofit camera cannot be installed easier.
A particularly inconspicuous installation is possible and the original appearance of the vehicle is maintained.
The video signal is transmitted via the included video cable and so to a monitor, a retrofit navigation system (eg, Pioneer, Sony, Alpine , Kenwood, etc.) or also via reversing camera interface (optional) directly on the factory navigation system when engaging reverse gear automatically displayed on the navigation system.
The optics gives you a horizontal wide angle view of 140°, ideal for use on the immediate area, so that the majority can be detected behind the vehicle.
About the camera module distance lines are also displayed with meter data in the monitor. This allows the distance to obstacles behind the vehicle better estimate.
Power is supplied via the 12V port on your car reversing light, so the camera automatically turns on when reverse gear is engaged.
Scope of delivery |
|
---|---|
Brand | maxxcount |
Product Type | Handle strips camera |
Integration | Car-specific |
Mounting position | handle bar |
Picture sensor | Color sensor, 1/4" CMOS |
Video norm | NTSC |
Lens angle | 140° |
Light sensitivity | 1 Lux |
color resolution | 420 TV lines |
Mirroring function | Yes |
Distance lines | Yes, Switchable |
Night vision function | No |
Backlight Compensation | Automatic |
White balance | Automatic |
Protection class | IP68 |
Color | black |
noise Ratio | >48db |
max. Amperage | 200mA |
Operating voltage | 12V |
Operating temperature | -20°C - 80°C |
Dimensions | 215 x 53 x 65 mm (L x W x D), installation opening: 131 x 42 mm (L x W), hole spacing: 170 mm |
EAN | 4047442073601 |
Important notes | With the GLC, the camera image directly behind the vehicle is limited due to the height of the rear flap. The camera delivers an image which is further away. |
---|