Backup Camera System: Twin Rear View Camera (95°+120°, White, IR) with 9" Stand-Alone Quadscreen Monitor

Backup Camera System: Twin Rear View Camera (95°+120°, White, IR) with 9" Stand-Alone Quadscreen Monitor

With this set maxxcount brings a solution on the market that is specially designed for use on vans, trucks, cars, trailers and much more. Due to the twin rear-view camera the view behind the vehicle and thus the parking and parking is no longer a problem.

Double safety in your vehicle thanks to the new "twin-rear camera"!

The first module offers an angle of detection of 120 ° and thus detects the immediate close range behind the vehicle. The second module has a detection angle of 95 ° and is suitable for detecting the rear traffic. The video signal is transmitted via a video cinch cable. There are virtually no limits to the range of application, whether you want to use it on the car, bus, camper, truck, trailer etc. - almost everything is possible.

Thanks to the night-vision system with 12 infrared LEDs per lens, you can always keep an eye on everything in front of or behind the vehicle in the dark.

The most resistant park distance control

The camera is massively manufactured and with protection class IP68 achieves best results with dust and splash water protection. The weather-resistant metal housing is additionally equipped with a special lens glass, which protects against corrosion and "blindness".

The delivery is complete with power / video connection cables, which allows you with 15m length all freedom during the installation. Pre-drilled holes can be used for mounting.

Quadscreen 9 inch (22.9cm) TFT LCD monitor for the dashboard

This TFT is specially designed for the requirements in vehicles. You can easily attach or screw the monitor to the dashboard using the supplied adhesive pad. You can optionally operate the TFT monitor with up to 4 cameras or other video sources.

If multiple video sources are available, you can choose between different viewing modes, eg

• Single view of a camera image
• Split view of 2 cameras, eg side camera and reversing camera
• Split view of 3 cameras, eg rear camera and side cameras
• All 4 cameras (front camera at the top, rear camera at the bottom, side cameras left / right)

You can switch directly on the monitor using the buttons or remote control. The system has an auto-on function, which means that when a video signal is present, the image is automatically displayed on the monitor. When the reverse is engaged, the monitor turns on automatically and displays the image of the rear view camera.

Know-How: Explanation of the angle of coverage

In the following we would like to show how the selected angle of coverage of the rear view camera affects the field of vision.

"Digital rear view mirror" - camera module with 95° angle

The medium angle of 95° covers less of the field of view in width, but is all the more suitable for displaying obstacles at depth. As the full width of the vehicle is usually not covered, these cameras are not suitable for monitoring the blind spot or space directly behind the vehicle.

Cameras with 95° angle of coverage can be used, for example, as "digital rear-view mirrors" to show the rear traffic or to monitor conveyor belts in agriculture.

Close range - 120° camera module

Rear view cameras with a 120° angle of coverage have proven to be the best. They capture the entire width of the vehicle without any problems. In addition, they do not produce any distortion and still offer a good depth display.

For this reason, these cameras are only suitable for monitoring the immediate close range, e.g. in the number plate bar, or also in trailer mode for detection when completely swiveling out.

Installed on a motorhome or van, e.g. at the usual height of 2.30 metres, the camera already records a width of more than 4 metres. Obstacles in the depth are also well represented by the downward orientation.