VIBE CVEN62C 6.5" 16.5cm 2-way high-end SQ component speaker 120W, 4Ohm, 45Hz -20kHz (EISA Award Winner), install depth: 73mm

VIBE CVEN62C 6.5" 16.5cm 2-way high-end SQ component speaker 120W, 4Ohm, 45Hz -20kHz (EISA Award Winner), install depth: 73mm

The CVEN speakers were developed by the Vibe R&D team in the UK.
The goal was to develop a loudspeaker that reproduces the recorded sound as realistically as possible.

SVEN6 woofer/midrange driver

The CVEN6 has a wide and flat frequency response, so it can be used in both a 2-way and a 3-way kit. The mid/bass driver is designed to overcome the typical problems of every loudspeaker design: distortion, power handling, dynamics and efficiency.

VIBE knows that the key to quality audio reproduction lies in the tuning and balance of the magnet, basket, voice coil, spider, cone and surround. All components of the system are matched and balanced to produce a flat frequency response that allows the listener to enjoy music the way the artist originally intended.

With 22 years of development experience, we believe we have created our best sounding speaker yet.

features

• Aluminum ring in the magnet for field stabilization for lower distortion at high levels.
• Vented voice coil former for reduced distortion and compression.
• New vented chassis for lower airflow velocity to reduce audible distortion.
• High-performance black fiberglass voice coil to increase resilience and reduce mechanical losses, resulting in better dynamics and detail.
• Large motor system with 1.3" voice coil diameter and 90mm magnet for better control, resilience and efficiency.
• Black magnetic parts for better heat transfer and higher resilience.
• Linear suspension with specially designed Conex damper (spider) for long durability under extreme operating conditions.
• Gold-plated terminals to protect against oxidation, for a long-term reliable connection.

Technical specifications

• System: Component Speakers
• Configuration: 2-way
• Speaker size: 6.5" (16.5cm)
• RMS power: 120 watts
• Peak power: 240 watts
• Minimum input (RMS): 60 watts
• Sensitivity: 91dB
• Frequency Response: 45Hz - 20kHz
• Impedance: 4Ω
• Installation depth: 73mm
• Installation diameter: 143mm
• Recommended amplifier: CVENS4-V4

SVEN1 tweeter

The CVEN 1 tweeter features a 22mm voice coil and wide surround, providing an extended range normally only achievable with larger drivers. Equipped with a feedback chamber, these compact tweeters offer a very low resonant frequency, enabling it to produce frequencies impossible to sustain.

To keep distortion and resonant frequencies low, the CVEN1 tweeter is constructed around an external neodymium ring magnet to provide a larger internal volume than traditional neodymium tweeters, resulting in improved frequency response.

features

• 22mm design for an optimal compromise between the best frequency response, resonance frequency and power handling.
• Rear chamber for low resonant frequency and lower distortion.
• Neodymium magnet outer ring for lower resonant frequency and distortion.
• Precision-coated textile cone for improved consistency and high-frequency extension.
• Optimized dome shape for ultra-high cut-off frequencies.
• Vented voice coil former for reduced distortion and compression.
• Copper clad aluminum voice coil wire with low moving mass for improved efficiency and better transient response.
• Built-in under dome/lip cavities for pressure equalization for lower distortion and lower resonant frequency.
• Flexible connection wires for higher load capacity and larger stroke.
• Large hexagonal grille, secured by the magnetic force of the motor, is easily removed for ultimate sonic purity.
• Gold-plated terminals to prevent oxidation and ensure a long-term reliable connection.

Technical specifications

• 22mm tweeter
• RMS power: 30 watts
• Peak power: 60 watts
• Minimum input (RMS): 60 watts
• Sensitivity: 89.5dB
• Frequency response: 2kHz - 30kHz
• Impedance: 4Ω
• Installation depth: 73mm
• Installation diameter: 143mm
• Recommended amplifier: CVENS4-V4