Versandkosten: 4,99 €
Building from the hugely successful LC-4.800 multi-channel amplifier, the LC-5.1300 is surely the most flexible 5 channel amplifier on the market. Featuring eight active speaker level inputs with summing, coupled with an intuitive three-way Linkwitz-Riley crossover network, the LC-5.1300 can be easily integrated with most factory installed source units. The patented AccuBASS® circuit compensates for factory bass roll-off and provides maximum bass performance.
More control and features include our GTO Signal Sense, MILC Source Clip Detection and assignable Remote Level Control. The LC-5.1300 builds on the legacy of audio passion and a focus on user-friendly features, making this a perfect solution based amplifier.
Many cars can turn on the factory amplifier even if the source unit is off (Alarms, Cell phones, etc). To prevent this from turning your system on unexpectedly, you can bypass the GTO™ circuit by moving the GTO™ jumper, and using an applied 12-volts at the Remote In terminal. Using the jumper may result in some factory features not working fully.
Factory installed amplifiers and woofers are (unfortunately) not designed to reproduce bass at high volumes. Car manufacturers adapt to this by taking the bass out of the signal when you turn up the volume. AudioControl developed the patent pending AccuBASS™ circuit to restore bass. After a quick and easy one-time setting, the AccuBASS™ circuit takes over the bass just as the factory system rolls off. You get smooth, seamless, and rock solid bass response regardless of volume level.
The MILC™ (Maximum Input Level Control) patent-pending level-setting circuit prevents clipping and damaging distortion. It calculates when the waveform of an incoming audio signal on input 1 and 2 is clipping, and if it is, this LED will fulfill its prime objective and shine forth. With this advanced feature, you are able to optimize the level of the incoming audio signals until the Source Clip LED is just-prior to lighting. If the LED comes on during normal operation, you should adjust the level of the audio signals before they reach the LC-6.1200.
The AudioControl ACR-1 dash control is a remote level for your LC-6.1200 amplifier. It may be mounted under the dash using its own enclosure, or through a custom hole in the dash. The knob should be within reach of the driver, and in a spot where the LED is plainly visible. Disconnect the vehicle battery +12V and Ground connections before installation.
The LC1i offers all of the features you'd expect in a high quality LOC without AccuBass or an ACR-1 dash mounted control knob port.
The LC2i Pro provides all the essential features needed when integrating aftermarket amplifiers with today's more complex factory sound systems.
The LC6i offers easy signal summing, 40 volts input handling and clean high to low level conversion.
When installing multi-channel amplifier systems into vehicles that will retain their factory radio, the LC6i offers a popular set of features to get the install done right and the vehicle sounding great... the first time.
The DQ-61 provides most of the popular features of a digital signal processor, but allows the installer to use traditional dials and switches instead of apps or software. With it's built-in EQ, time correction, signal summing, line driver, line output conversion and AccuBass features, the DQ-61 is an incredible value.
The LC8i offers 8 channels of easy signal summing, 40 volts input handling and clean high to low level conversion as well as an easy-to-use AUX input that can be controlled via the included ACR-2 dash mounted remote level control.
A digital signal processor is your solution. Our DM series (digital matrix) DSP's feature line output conversion, equalization, crossover, time alignment, signal summing, AccuBass and remote level control that can be assigned to any output. Our DM-Smart DSP app allows control of all features, runs on all popular platforms, and is among the easiest to use in the industry.
That's what makes the new LC-5.1300 an installer's dream. The combination of class-leading power levels, built-in line output converter with signal summing, flexible crossover section and unmatched warranty make the LC series of amplifiers like nothing else you've ever installed. This particular model boasts 1300 watts of RMS power and a streamlined interface for easier installation.
That's what the D series of amplifiers from AudioControl represent. If you're looking to install one amplifier that can truly "do it all", then the D-5.1300 is for you. With 1300 watts of RMS power, an onboard DSP, built-in LOC & signal summing, as well as a pair of RCA outputs from the DSP for future system expansion, there is truly nothing else quite like it.
| Technical data | Inputs
Outputs
Performance
Weights & Dimensions
|
|---|---|
| Scope of delivery |
|
| Dimensions | 305 x 203 x 53 mm |
| Brand | AudioControl |
| Product Type | Amplifier |
| Amplifier Class | Class D |
| Leistung (RMS) | ab 751 Watt |
| Channels | 5 Channel |
| Power Rating (RMS) | 1300W |
| Remote control | Connection only |
| Crossover Modes | HPF, LPF |
| Color | black |
| EAN | 0851523007805 |
