Customer Hotline
+49 (0)351 871 8222
Einkaufsoptionen
Amplifier Wiring Kits & Racks
-
ROCKFORD RFK-HD9813M5 Plug&Play Fairing Amp Installation Kit for TM400X4ad / M5-800X4 for Harley-Davidson® 1998-2013- Full specification cable - meets or exceeds AWG (American Wire Gauge) requirements
- 100% pure crystalline, oxygen-free copper (PC-OFC)
- Plug and play design for easy installation
- Fits Harley-Davidson® motorcycles 1998-2013
- Designed for use with the M5-800X4 and TM400X4ad amplifiers
- Y-adapters included in the amplifier installation kit support expansion of lower fairing, saddlebag or Tour-Pak® speakers
- Includes mounting brackets for Bat Wing and Shark Nose fairings
- Includes wiring harness for the rear speaker output for connecting rear speakers
399,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost in Dtl.A23206Delivery Time 1 - 4 Days* -
Plug&Play amplifier kit for HERTZ amplifier on original radio 1998+- Pre-assembled for the factory radio wiring harness
- Ready-to-plug signal feed to the HERTZ amplifier
- Incl. 10mm² power & ground kit for amplifier
- Incl. IPX fuse holder + fuse
349,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A23518Delivery Time 1 - 4 Days* -
Plug&Play amplifier kit for SounDigital amplifiers on original radios 1998+- Pre-assembled for the factory radio wiring harness
- Ready-to-plug signal feed to the SoundDigital amplifier
- Incl. 10mm² Power & Ground Kit for amplifiers
- Incl. IPX fuse holder + fuse
349,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A23520Delivery Time 1 - 4 Days* -
Metra DIY AmpKit (BC-9716+ST-AK8) amplifier connection kit audio & power supply for self-soldering for Harley-Davidson® from 1998- To add an amplifier or to use with AXDSPX-WR
- Adding an amplifier wiring harness to fit 1998-2013 Harley-Davidson® with OE radio and fairing
- Pre-wiring for AXDSPX-WR, input and output harness included
- With pre-assembled input and output cables
- RCA output harnesses included
- Pre-wired rear speaker connector used with BC-9720 backbone harness
- Universal for all amplifiers on the market
- Cable wrapped with protective fabric tape
- 1.8m red and black T-Spec OFC power and ground wire
- T-Spec V8MANL fuse holder with 60A fuse protected by black nylon braid
- Pre-assembled ring cable lugs make connection to the battery easy
- 2x 1.2m loudspeaker cable OFC (1.5mm²) protected by automotive heat-shrink and braided hose
- Incl. Velcro pad (10x15cm), holds all amplifiers without fans in the base securely in place
279,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost in Dtl.A23506Delivery Time 1 - 4 Days* -
Plug&Play amplifier kit for HERTZ amplifiers on Soundstream HDHU.9813RG / HDHU.9813SG- Pre-assembled for the Soundstream radio wiring harness
- Ready-to-plug signal feed to the Hertz amplifier
- Incl. 10mm² Power & Ground Kit for amplifiers
- Incl. IPX fuse holder + fuse
- Incl. Velcro pad for amp
279,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A23519Delivery Time 1 - 4 Days* -
Plug&Play amplifier kit for SounDigital amplifiers on Soundstream HDHU.9813RG / HDHU.9813SG- Pre-assembled for the Soundstream radio wiring harness
- Ready-to-plug signal feed to the SoundDigital amplifier
- Incl. 10mm² Power & Ground Kit for amplifiers
- Incl. IPX fuse holder + fuse
- Incl. Velcro pad for amp
279,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A23521Delivery Time 1 - 4 Days* -
Metra BC-9704 Amplifier Connection Set suitable for Harley-Davidson® FLH & FLT from 1998- Single or dual amp installation harness
- Oxygen-free copper wiring for better conductivity and performance
- 25mm² / 4GA OFC power and ground wires
- Distribution block to (2) 4GA power and ground wires
- 4ft Zip-tie for wire routing included
- 1998-2013 charge port T-harness, hardwired remote turn-on
- 2014-UP 2-pin plug in T-harness for accessory turn-on
124,90 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A22791Delivery Time 1 - 4 Days* -
Metra BC-AMP02 Amplifier Mounting Bracket suitable for Harley-Davidson® 1998-2013 with Batwing Fairing- Suitable for Harley-Davidson® Touring Models / Street Glide™ (Batwing Fairing)
- No Drilling Required
- Steel Construction with UV powder coating.
- Pre-drilled hole for Metra Powersports Amps (MPS-AMP60×4, MPS-AMP100×2, MPS-AMP200-2D, MPS-AMP125-4D, MPS-AMP850-5D)
- Works with most other Micro amps
- Allows installation of 2 MPS Amplifiers (drilling required for 2nd mount)
99,99 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A20254Delivery Time 1 - 4 Days*
