Customer Hotline
+49 (0)351 871 8222
Einkaufsoptionen
Amplifier Wiring Kits & Racks
CICADA
METRA
-
Metra DIY AmpKit (BC-9716+ST-AK8) amplifier connection kit audio & power supply for self-soldering for Harley-Davidson® from 1998- To add an amplifier or to use with AXDSPX-WR
- Adding an amplifier wiring harness to fit 1998-2013 Harley-Davidson® with OE radio and fairing
- Pre-wiring for AXDSPX-WR, input and output harness included
- With pre-assembled input and output cables
- RCA output harnesses included
- Pre-wired rear speaker connector used with BC-9720 backbone harness
- Universal for all amplifiers on the market
- Cable wrapped with protective fabric tape
- 1.8m red and black T-Spec OFC power and ground wire
- T-Spec V8MANL fuse holder with 60A fuse protected by black nylon braid
- Pre-assembled ring cable lugs make connection to the battery easy
- 2x 1.2m loudspeaker cable OFC (1.5mm²) protected by automotive heat-shrink and braided hose
- Incl. Velcro pad (10x15cm), holds all amplifiers without fans in the base securely in place
279,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost in Dtl.A23506Delivery Time 1 - 4 Days* -
CICADA HDPG4K amplifier cable set 4 gauge (25mm²) suitable for Harley-Davidson®- Suitable for Harley-Davidson®
- 4 Gauge / 25mm² Set
- 6ft Power/Ground with black over braid
- Terminated w/ ring terminals at the battery side
- Ferrules on the amp side
- Remote trigger wire w/ H-D® plug for termination to remote trigger or plug into the H-D® harness
- Waterproof Mini ANL Fuse Holder w/ 60- and 100-amp fuses
139,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost 6,49 € in Dtl.A23692Delivery Time 1 - 4 Days* -
Metra BC-9704 Amplifier Connection Set suitable for Harley-Davidson® FLH & FLT from 1998- Single or dual amp installation harness
- Oxygen-free copper wiring for better conductivity and performance
- 25mm² / 4GA OFC power and ground wires
- Distribution block to (2) 4GA power and ground wires
- 4ft Zip-tie for wire routing included
- 1998-2013 charge port T-harness, hardwired remote turn-on
- 2014-UP 2-pin plug in T-harness for accessory turn-on
124,90 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A22791Delivery Time 1 - 4 Days* -
CICADA HDPG8K amplifier cable set 8 gauge (10mm²) suitable for Harley-Davidson®- Suitable for Harley-Davidson®
- 8 Gauge / 10mm² Set
- 6ft Power/Ground with black over braid
- Terminated w/ ring terminals at the battery side
- Ferrules on the amp side
- Waterproof Mini ANL Fuse Holder
119,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A23691Delivery Time 1 - 4 Days* -
Metra BC-AMP01 Amplifier Mounting Bracket suitable for Harley-Davidson® Touring with hard saddlebags- Suitable for all Harley-Davidson® Touring Models with hard saddlebags
- No drilling required
- Steel construction with UV powder coating
- Pre-drilled for Metra PowerSports Amps (MPS-AMP60×4, MPS-AMP100×2 or MPS-AMP200-2D)
- Works with most other micro amps
- Molded carpet cover for protection and a clean look
99,99 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A20253Delivery Time 1 - 4 Days* -
Metra BC-AMP02 Amplifier Mounting Bracket suitable for Harley-Davidson® 1998-2013 with Batwing Fairing- Suitable for Harley-Davidson® Touring Models / Street Glide™ (Batwing Fairing)
- No Drilling Required
- Steel Construction with UV powder coating.
- Pre-drilled hole for Metra Powersports Amps (MPS-AMP60×4, MPS-AMP100×2, MPS-AMP200-2D, MPS-AMP125-4D, MPS-AMP850-5D)
- Works with most other Micro amps
- Allows installation of 2 MPS Amplifiers (drilling required for 2nd mount)
99,99 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A20254Delivery Time 1 - 4 Days* -
Metra BC-AMP03 Amplifier Mounting Bracket suitable for Harley-Davidson® 1998-2013 with Batwing Fairing- Suitable for Harley-Davidson® Touring Models Street Glide™ (Batwing Fairing)
- Steel construction with UV powder coating
- Can also be used to mount amplifier (drilling required)
99,99 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A20255Delivery Time 8 - 11 Days* -
Metra BC-AMP04 Amplifier Mounting Bracket suitable for Harley-Davidson® Road Glide™ from 2015- Suitable for Harley-Davidson® Road Glide™ 2015 – Up
- No drilling required
- Steel construction with UV powder coating
- Pre-drilled for Metra PowerSports Amps (MPS-AMP60×4, MPS-AMP100×2 or MPS-AMP200-2D)
- Works with most other micro amps
- Note: Requires four 1/4-20 Bolts 3/4in. long (not supplied) to attach
99,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A20256Delivery Time 1 - 4 Days* -
Metra BC-AMP05 Amplifier Mounting bracket suitable for Harley-Davidson® Road Glide™ 1998-2013- Suitable for Harley-Davidson® Road Glide™ 1998-2013
- Steel construction with UV powder coating
- Uses OE screws for attachment
- Two mounting options – Left or right of stay bracket
- Multiple cable ties to secure cables to the mount
- Includes Velcro pad
99,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A23608Delivery Time 11 - 14 Days* -
Metra BC-AMP06 Amp Bracket Kit for Harley-Davidson® Street Glide™ 2014+- Suitable for all Harley-Davidson® Street Glide™ from 2014
- Steel construction with UV powder coating
- Uses OE bolts for mounting
- OE harness mounting points
- Multiple zip tie location to secure wire to bracket
- Velcro pad included
99,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A22365Delivery Time 1 - 4 Days*
