25cm / 10"

• 25cm / 10 inch DVC subwoofer
• 250W RMS / 350W Peak
• 2″ voice coil
• HPPC Membrane (High Pressed Paper Cone)
• PPTA Connex Spider
• Pole core drilling
• Very stable sheet metal basket
• Reinforced dust cap
• LLE (Long Life Edge)
• Installation Ø: 227 mm | Outer Ø: 261 mm
• Installation depth: 114mm

• RADION-SERIES EVO woofer
• 20 l closed housing with R 10 FLAT EVO
• High-strength housing made of 18mm MDF
• 33mm front panel in carbon look
• Dimensions: L = 460 mm | H = 340 mm | D1 = 150 mm | D2 = 280 mm

• Passive car subwoofer with 10" / 25cm Woofer and 400W RMS / 800W max.
• Ultra-flat (14.2cm) closed housing design with a volume of 12 liters
• 60mm double voice coil with 2x 4Ω
• High-level & low-level ( RCA ) inputs
• Sub Smart Plug - Plug & Play connection to easily and safely separate the box
• Connection terminal on the side of the box
• Dimensions: 470 x 142 x 334 mm
• inclusive connection cable
• Suitable in combination with Audison DSP amplifier AP8.9 bit / AP5.9 bit / AP4.9 bit

• Passive car subwoofer with 10" / 25cm Woofer and 400W RMS / 800W max.
• Ultra-flat (14.2cm) closed housing design
• 60mm Single voice coil with 4Ω
• High-level & low-level ( RCA ) inputs
• Sub Smart Plug - Plug & Play connection to easily and safely separate the box
• Connection terminal on the side of the box
• Dimensions: 470 x 142 x 334 mm
• inclusive connection cable
• Suitable in combination with Audison DSP amplifier AP8.9 bit

• 25cm / 10 inch DVC subwoofer
• 400W RMS / 800W peak
• 60mm double voice coil with 2x 4Ω
• Ultra-flat profile (120mm) for maximum installation freedom
• 12.6mm max. Membrane deflection for optimal air mass movement
• Water-repellent cotton fiber reinforced paper membrane
• Specially developed cone dustcap geometry for a long linear deflection
• Ventilation slots on the side of the basket for excellent cooling
• Solid nickel-plated push terminals
• Installation depth: 8.8 cm
• System / Upgrade -> removable grille and low installation depth
• Optimized for closed housings (10-12 L)

• 25cm / 10 inch SVC subwoofer
• 400W RMS / 800W peak
• 60mm single voice coil with 1x 4Ω
• Ultra-flat profile (120mm) for maximum installation freedom
• 12.6mm max. Membrane deflection for optimal air mass movement
• Water-repellent cotton fiber reinforced paper membrane
• Specially developed cone dustcap geometry for a long linear deflection
• Ventilation slots on the side of the basket for excellent cooling
• Solid nickel-plated push terminals
• Installation depth: 8.8 cm
• System / Upgrade -> removable grille and low installation depth
• Optimized for closed housings (10-12 L)

B-stock: New goods in opened original packaging!

• 10“/25cm Free Air Marine Subwoofer
• 2 Ohm Single Voice Coil
• 250W RMS / 500W Max
• Mounting diameter: 277 mm
• Mounting depth: 145 mm
• Long-throw 50mm (2”) voice coil
• Polypropylene cone injected with UV inhibitors and comolded Santoprene surround
• Progressive-design aramid fiber spider with silicone-insulated lead wires
• Gold-plated corrosion resistant brass connection terminals with silicone cap protecting leadwire junction point
• Manufactured according to IP65 marine standards
• 100% UV stability according to ASTM D4329
• Suitable for use at sea & off-road (yachts, boats, jeeps, UTV, etc.)

• 25cm / 10 Zoll Slim Subwoofer
• 250W RMS / 500W Peak
• PP membrane
• paper dust cap
• rubber surround
• Built for closed and bass reflex enclosures
• Impedance: 2x 2Ω
• Installation depth: 75mm

• 25cm / 10 inch DVC subwoofer
• 400W RMS / 800W Max
• Sandwich paper cone
• Klippel® optimised
• Long excursion rubber surround in U-shape
• Chrome-plated pressure contact connection
• Installation depth: 8.5cm

• 10" /25cm, Dual Voice Coil 2 Ohm
• Power: 600W RMS / 2400W Max.
• High magnetic permeability plates provide constant, even flux
• Large double magnet, for perfect control under high power, very high excursion conditions for high SPL performance
• Four-layer aluminium voice coil; for unheard-of thermal capability
• Back plate venting holes, for optimal thermal dissipation
• Back vented spider support; for perfect symmetry under high excursion
• Double wide-wave, resin-bonded fibre spider; for consistent parameters and reliability
• Water-repellent, pressed paper cone
• High density foam surround; for linear movement, even under extreme excursion