Customer Hotline
+49 (0)351 871 8222
Einkaufsoptionen
-
AMPIRE CAN3901V car alarm for CAN bus (CAN Standard)- Activation / deactivation only with factory original remote control or convenience key
- No mitigation by breaking the door lock or trunk lock
- Flashing LEDs with integrated service switch allows diagnosis, operation Programming
- Integrated 2-stage shock sensor with warning warns of risers or Parkrempler
- No false alarms with remote controlled boot opening, heater and remote engine start
- Emergency deactivation and service mode at any time and safely possible, even without remote control
- inclusive high-current relay immobilizers for safe starter interruption
279,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost in Dtl.A17692Delivery Time 6 - 9 Days* -
AMPIRE CAN3903V car alarm for CAN bus (high-speed CAN)- Activation / deactivation only with factory original remote control or convenience key
- No mitigation by breaking the door lock or trunk lock
- Flashing LEDs with integrated service switch allows diagnosis, operation Programming
- Integrated 2-stage shock sensor with warning warns of risers or Parkrempler
- No false alarms with remote controlled boot opening, heater and remote engine start
- Emergency deactivation and service mode at any time and safely possible, even without remote control
- inclusive high-current relay immobilizers for safe starter interruption
279,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost in Dtl.A17693Delivery Time 6 - 9 Days* -
PATROLLINE HPS848 CAN bus alarm system camper for Fiat Ducato, Citroën Jumper, Peugeot Boxer from 2011- Programmable alarm system with vehicle-specific cable set
- Easy installation in the Fiat Ducato, Citroën Jumper, Peugeot Boxer from 2011
- Sharpen / defuse with original vehicle remote control
- Integrated adjustable vibration sensor
- Further sensors can be easily integrated
- 115 dB wireless siren (additionally monitors operating voltage)
- Panic function via transponder remote control HPA978
- With status LED
- Made in Italy
259,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost in Dtl.A20117Delivery Time 6 - 9 Days* -
-44%PAC BCI-FD21 front, side & rear view camera Interface for Ford from 2013 to 2016 with 8.4 "MyTouch- Automatic activation of front, side, and rear view camera
- Front and side camera manually activated
- Simple Plug & Play installation
Regulärer Preis 399,00 € Sonderpreis 224,10 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost in Dtl.A17845Delivery Time 1 - 4 Days* -
4-port Video Splitter with 4 display modes: Single / Dual / Triple / Quad- Up to 4 cameras on 1 monitor displayed simultaneously
- 4 modes selectable (1/2/3/4 camera images)
- For all monitors with RCA video input
- Reflection set individually for each video channel
- Power supply: 12 / 24V
- Audio Channel & control line for each video input
-
VIPER 3106V Alarm System "350plus" with two remotes- Ideal entry-level system with optional remote control
- Central concludes with sharpening of the alarm system
- Change coding prevents cloning of the signal
- Intelligent NPC® anti-false alarm technology
- Compact 121dB Neodymsirene
- Remote control distance: 100m
199,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost 6,49 € in Dtl.A17695Delivery Time 1 - 4 Days* -
Video switch RVC and front camera with timer on Navlinkz RL/VL (SW-FRONTCAM)- Automatically switches to front camera for 10 seconds after reverse gear is engaged and disengaged
- During this time, the video switch provides a trigger output signal and enables the front camera to be fed into the rear view camera input
- Compatible with r.LiNK (RL2/RL3) and v.LiNK (VL2/VL3)
- Power supply output for front and rear view camera (500mA)
- Manual switching to front camera possible for 10 seconds (via +12V or ground with external button)
- When reverse gear is engaged, the reversing camera is always switched on
139,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A23420Delivery Time 1 - 4 Days* -
PAC AVS21 2x video switch / RCA distributor with automatic switching for BCI interfaces- Simple and reliable
- Switchable positive or negative trigger
- Slim and compact makes it easy to hide
- It can be used with a BCI product or as a stand-alone AV switcher
- Header type connection enables direct plug-and-play use in future product designs
99,99 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A23730Delivery Time 1 - 4 Days* -
PAC VS41 4x video switch for switching reversing lights, front and side cameras for BCI, RP4.2-, or RP5.2- Interface- Automatic activation of front, side, and rear view camera
- Simple Plug & Play installation for PAC BCI, RP4.2 and RP5.2 Interface
- Integrated signal filters against image disturbance
- Connects directly to an analogue turn-signal circuit with flash eliminating signal buffer for uninterrupted side camera activation
- Works with OE or aftermarket radio (OE requires interface)
- Priority override for backup camera signal
- Provides reverse camera output trigger for aftermarket radios
99,99 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A17846Delivery Time 1 - 4 Days* -
4x Camera Switch for Front, Side and Rear View Cameras for Switching during Parking 12V- automatic switching between front and back camera
- Side cameras activated manually
- Single-, Dual-, Triple- or Quad - image
- compact design
- universally applicable
- For all 12V vehicles
