Customer Hotline
+49 (0)351 / 2145 12 12
Filter
Auto Einbauzubehör
METRA
Axxess
-
Metra 99-9700 1DIN Mounting kit with CAN-BUS Interface & Info-LCD suitable for Harley-Davidson® from 2014- Allows you to swap the factory radio
- CAN-BUS Interface with the following features:
- ACC 12V 10A
- High level speaker input
- Balance and fading are preserved
- Oil pressure and EITMS status are retained
- Pre-wiring for handlebar remote control adapter ASWC-1
- Incl. LCD for oil pressure and EITMS display
299,00 €Incl. 19% VAT , excl. Shipping Cost
Free Shipping in GermanyA19144Delivery Time 8 - 11 Days* -
Axxes AX-TYAMP2-SWC CAN-Bus Adapter (Amplifier + SWC) for Toyota 2012+- Necessary when replacing the factory radio / navigation device with a retrofit radio / navigation device
- Especially for selected Toyota 2012 up
- Keeps the CAN data bus communication intact
- Retains audio controls on the steering wheel
- Retains the factory AUX-IN jack
- Retains balance
- Always "up-to-date": software updates via micro-B USB port
279,00 €Incl. 19% VAT , excl. Shipping Cost
Free Shipping in GermanyA20532Delivery Time 8 - 11 Days* -
Axxess AXDIS-GMLN11 CAN-BUS Interface set incl. SWC for Chevrolet, Opel, Pontiac, Saturn 2006-2011- Allows you to swap the factory radio and preserve the functions of the original steering wheel remote control
- Steering wheel remote control adapter already integrated in the interface
- Includes Factory AUX, Factory Bluetooth & OnStar
- Balance and fading are maintained (for vehicles with / without amplifier)
- Provides the following signals in addition to ignition plus with RAP (delayed switch-off)
- Speed signal,
- Hand brake signal,
- Reversing signal
279,00 €Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA20328Delivery Time 11 - 14 Days* -
Axxess AX-HYKIA2-SWC CAN bus Adapter for Hyundai Veloster from 2012- Allows simple exchanging the factory radio / -navis against an aftermarket device
- Provides required when retrofitting data (eg Ignition, speedometer and reverse signal, gain control)
- replaced the original Blue Link system
- Designed for amplified (Requires the AX-HYKIA-SPDIF) and non-amplified models
279,00 €Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17254Delivery Time 15 - 18 Days* -
Axxess AXDIS-FD2 CANBus Interface for Ford (from 2011) with ACC & NAV- Necessary when replacing the factory radio / -Navi against an aftermarket radio / navigation system
- Especially for selected Ford vehicles with ACC + NAV
- Does the CAN databus communication intact
- Receives audio operation of the steering wheel remote control
- Provides the following amplifier functions still available:
- High-level speaker input
- Plug & Play installation
- Always "up-to-date": software updates via micro-B USB Port
279,00 €Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17676Delivery Time 8 - 11 Days* -
Axxess AXDIS-CH13 CAN bus Interface Kit incl. SWC Interface for Chrysler, Dodge , Jeep- Enables the exchange of factory radio and preservation of its functions of original steering wheel remote control
- integrated steering wheel remote control in Interface
- Retains balance and fade (non-amplified models only)
- Controls (if available) to the car's preamp via CAN bus
- Situated beside ignition positive with RAP (delayed disconnection) The following signals
- Speed signal,
- Hand brake signal,
- Reversing signal,
279,00 €Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17858Delivery Time 8 - 11 Days* -
Axxess AX-ADBOX1 Universal CAN-BUS Adapter for US vehicles (without cable)- Necessary when replacing the factory radio / -Navi against an aftermarket radio / -Navi (with / without amplifier system)
- Ua for: Buick, Cadillac, Chrysler, Dogde, Ford, Hummer, Jeep, Toyota, VW
- Does the CAN databus communication intact
- Provides the following amplifier functions still available:
- High-level speaker input
- Adjusting the fader
- Balance adjustment
- Plug & Play installation
- Incl. Pre-wiring for optional steering wheel remote control adapter ASWC-1
- Always "up-to-date": software updates via micro-B USB Port
€249.90Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17277Delivery Time 15 - 18 Days* -
Axxess AXTO-CH2 Active System Adapter for Chrysler & Dodge- easy installation of an aftermarket radio
- for Chrysler / Dodge with Infinity, Boston Acoustics or Kicker amplifier
- Original amplifiers still usable
- allows retrofitting a navigation system
- RAP function remains
€249.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17423Delivery Time 1 - 4 Days* -
Axxess HYBL-05 CAN-BUS Interface for Hyundai Veloster from 2013 without amplifier- Allows easy replacement of the factory radio / -Navis against a retrofit device
- Provides the data required for retrofitting (eg ignition plus, tachometer and reversing signal, amplifier control)
- Includes original Blue Link system, rear view camera & 3.5mm AUX-In
- Pre-wiring for Steering Wheel FB Interface ASWC-1 (sold separately)
- Updates via micro USB
€249.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA18893Delivery Time 8 - 11 Days* -
Axxess AXTO-CH13 Active System Adapter for Chrysler & Dodge from 2004- Easy installation of a retrofit radios
- For Chrysler / Dodge from Year of manufacture 2004 / without amplifier
- Original amplifiers still usable
- Allows retrofitting a navigation system
- receive RAP function to remain & Blind Spot
- Always "up-to-date": software updates via micro-B USB Port
€229.00Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17504Delivery Time 8 - 11 Days*
