Customer Hotline
+49 (0)351 871 8222
Filter
maxxcount
-
4-port Video Splitter with 4 display modes: Single / Dual / Triple / Quad- Up to 4 cameras on 1 monitor displayed simultaneously
- 4 modes selectable (1/2/3/4 camera images)
- For all monitors with RCA video input
- Reflection set individually for each video channel
- Power supply: 12 / 24V
- Audio Channel & control line for each video input
€199.90Incl. 19% VAT , excl. Shipping Cost
Free Shipping in GermanyA17699Delivery Time 1 - 4 Days* -
Video switch RVC and front camera with timer on Navlinkz RL/VL (SW-FRONTCAM)- Automatically switches to front camera for 10 seconds after reverse gear is engaged and disengaged
- During this time, the video switch provides a trigger output signal and enables the front camera to be fed into the rear view camera input
- Compatible with r.LiNK (RL2/RL3) and v.LiNK (VL2/VL3)
- Power supply output for front and rear view camera (500mA)
- Manual switching to front camera possible for 10 seconds (via +12V or ground with external button)
- When reverse gear is engaged, the reversing camera is always switched on
€139.00Incl. 19% VAT , excl. Shipping CostDelivery 6,49 € in GermanyA23420Delivery Time 1 - 4 Days* -
4x Camera Switch for Front, Side and Rear View Cameras for Switching during Parking 12V- automatic switching between front and back camera
- Side cameras activated manually
- Single-, Dual-, Triple- or Quad - image
- compact design
- universally applicable
- For all 12V vehicles
€99.90Incl. 19% VAT , excl. Shipping CostFree Shipping in GermanyA17415Delivery Time 1 - 4 Days* -
2-port Camera Switch for Front & Rear View Cameras for automatic switching during parking- Automatic switching to the front camera
- compact design
- easy installation
- universally applicable
€79.90Incl. 19% VAT , excl. Shipping CostDelivery 6,49 € in GermanyPlease request delivery timeA17000 -
Switch box for 2 different cinch video sources or rear view camera (SW-V2X1-RCA)- 2 video inputs to 1 video output cinch plug
- Switches to the 2nd video input when +12V signal is applied to the switch input
- Circuitry: blue: +12 Volt DC (reversing signal) | black: ground
€64.99Incl. 19% VAT , excl. Shipping CostDelivery 6,49 € in GermanyA22828Delivery Time 6 - 9 Days* -
BatteryStop: Switches against battery discharge eg for camper, Convertible- Prevents discharge of the battery
- Prevents electrical fires
- Prevents unauthorized operation
- Avoids tedious unscrewing of battery cables while charging
- With fuse for continued operation of clock, alarm and programming
- Suitable for 6V, 12V, 24V
- Installation time: 5 minutes
€39.99Incl. 19% VAT , excl. Shipping CostDelivery 6,49 € in GermanyA20392Delivery Time 11 - 14 Days* -
Noise Filter / Ground Loop Isolator (RCA)- Easy construction
- The leads are shielded triple
- Gold plated connectors
€39.99Incl. 19% VAT , excl. Shipping CostDelivery 1.95 € in GermanyA15794Delivery Time 1 - 4 Days* -
maxxcount Camper Car Fuse Holder 50mm²-6mm² Mini ANL distribution block with LED display, for motorhomes, trucks, boats, 30A 60A 80A fuses and including 44 wire end sleeves- Complete set for professional camper cabling including all wire end sleeves
- Ferrules prevent damage to the fine strands of the power cable
- Includes function display: glowing red LED signals a defective fuse
- 4x Mini ANL fuse distributor: including 2 x 30A, 2 x 60A, 2 x 80A fuses
- Inputs: 2x 50mm² - 6mm² (0GA - 10GA), outputs: 4x 25mm² - 4mm² (4GA - 12GA)
- Fully insulated base plate & removable plastic cover
- High-quality, solid power connections with nickel/zinc alloy for minimal contact resistance and optimal load transfer
- Distribution block for car, boat, RV, truck, SUV, SUV, ATV, UTV, marine and others for power distribution
- maxxcount complete set with 6 fuses and 44 wire end sleeves
€34.99Incl. 19% VAT , excl. Shipping CostDelivery 6,49 € in GermanyA23781Delivery Time 1 - 4 Days* -
maxxcount MX-AFS4LED combined 4-way mini-ANL fuse holder + mass distribution block with LED display for 50-20mm², suitable for all cars, campers, mobile homes, vans and boats, including fuses- Distribution block with integrated 4-way mini ANL fuse holder to protect the installation from overloading
- Mini ANL fuses: 2x 30A + 2x 60A + 2x 80A (as a replacement)
- The red LED clearly indicates defective fuses
- Inputs: 2x 50mm² - 6mm² (0GA - 10GA)
- Outputs: 4x 25mm² - 4mm² (4GA - 12GA)
- Fully Insulated Base & Removable Plastic Cover
- high-quality, solid power connections with nickel/zinc alloy for minimum contact resistance and optimal load transfer
- Can be used in cars, campers & caravans, trucks, trailers, marine & power sports
€27.99Incl. 19% VAT , excl. Shipping CostDelivery 6,49 € in GermanyA23222Delivery Time 1 - 4 Days* -
maxxcount PowerSplitter power distribution block 1x 0GA input to 2x 0GA output, nickel-plated brass- Power distribution block made of brass, nickel-plated
- 1 IN - 2 Out
- for cars, motorhomes
- Cable sizes: 1 x 0GA (35-50mm²) to 2 x 0GA (35-50mm²)
- Hole sizes: 1 x 12mm / 2 x 14mm
€19.99Incl. 19% VAT , excl. Shipping CostDelivery 6,49 € in GermanyA23516Delivery Time 1 - 4 Days*
