Rockford Fosgate TMS69BL9813 6x9" 100W coax speakers (pair) as an upgrade for HD9813RG/SG-TKIT for Harley-Davidson® Road Glide™ / Street Glide™ 1998-2013
Rockford Fosgate TMS69BL9813 6x9" 100W coax speakers (pair) as an upgrade for HD9813RG/SG-TKIT for Harley-Davidson® Road Glide™ / Street Glide™ 1998-2013
599,00 €
Incl. 19% VAT.
Designed for use with 1998-2013 Factory Harley-Davidson® Hardshell Bags
Designed for use with existing 1998-2013 Rockford Fosgate Stage kits
Direct Connect Wiring Harness to Rockford Fosgate Amplifiers
Ultra‐High Temperature Glass Reinforced Polymer Frame
Painted Stamped Steel Grill with ASA Plastic Frame for UV Protection
Sandwich Clamping Gasket Design for Environmental Seal
Includes Custom Cut Out Guide
Includes all Installation Hardware and Accessories
Ultra-Efficient 25mm Proprietary Film Dome Tweeter
Neodymium Tweeter with Integrated Phase Plug and ASA Grill
NOTE: leave 2" minimum clearance under speaker magnet when packing bags
Rockford Fosgate TMS69BL9813 6x9" 100W coax speakers (pair) as an upgrade for HD9813RG/SG-TKIT for Harley-Davidson® Road Glide™ / Street Glide™ 1998-2013
Retrofit kit allows addition of rear speakers on your existing factory bag lids and plug directly into a Rockford Fosgate front audio kit that utilizes the Power T400X4ad, TM400X4ad, or M5-800X4 4-channel amplifiers. Eliminates need to paint and color match. See Specifications tab for compatible motorcycles.
If you need more than just two speakers and want to really feel your music while riding then check out our add-on bag lid audio solution. Centered around our TMS69 6x9" speaker this kit is designed to work with your existing factory bag lids. This means no extra parts to purchase or custom paint schemes to match. Easy to install using our included cutting template and two-piece mounting system you can quickly add on to an existing or new fairing audio kit using with the included plug and play harness. This system is designed to plug directly into the Rockford Fosgate Power T400X4ad or TM400X4ad 4-channel amplifier. Not designed for factory amplifiers.
*Refer to our COMPATIBILITY chart to verify fitment before purchasing.
Attention: On all Harley-Davidson® from 2014 onwards, the factory radio must be flashed before installing a maxxcount Sound Pack to prevent damage to the speakers!
Why do Harley-Davidson® from 2014 have to be flashed before an amplifier is retrofitted?
1. PROBLEM:
The 2014 Harley-Davidson® OEM factory radios use a "high fidelity" EQ curve that provides a powerful sound on low-power systems (the red curve in the picture below).
However, when retrofitted with an external amplifier, this curve over-amplifies bass and treble, causing significant distortion at higher levels and speaker damage.
2. SOLUTION:
Reset the factory EQ curve to a neutral (flat) EQ curve (see green line above) by "flashing" the Harley-Davidson® radio so that the downstream DSP or amplifier gets a neutral input signal and the connected speakers are not damaged.
This is the simplest and cheapest method to solve the problem. The "flash" method is also the acoustically optimal solution as it preserves signal integrity and thus provides maximum dynamic range and voltage potential from the source device for optimal sound quality.
Please do not use a line leveler to lower the EQ curve, as this will cut all frequencies sharply above 200Hz, thereby clipping a large part of the bass range!
3. How to flash the Harley-Davidson® Radios 2014+?
To flash the Harley-Davidson® radio you need special programming tools such as Diag4Bike or the kit from TechnoResearch.
However, if you own an older generation radio (all devices without touchscreen such as the 4.3" device with 11 buttons or the 6.5" GT radio with 4 buttons) and have always flirted with the latest Apple Carplay or Android Auto functions, you might consider a cutting-edge 7" touchscreen radio with all functions such as the SoundStream HDHU14+ (our item number: A22360) might be an option - it doesn't need to be flashed anymore ;-)
4. How to get the programming tools?
4.1. If you buy a BIKE kit from us, we will provide you with our TechnoResearch kit free of charge and on loan for 10 days at the installation date.
4.2. If you don't have the confidence to do this, you can of course ask the Harley-Davidson® specialist of your choice if he is able to flash the EQ of the radio.
4.3. If you have any questions about flashing, please contact us.
Electra Glide Standard (1998—2013, FLHTI, Bat Wing)
Electra Glide Ultra Classic (1998—2013, FLHTCU, Bat Wing)
Electra Glide Ultra Limited (2010—2013, FLHTK, Bat Wing)
Road Glide™ (1998—2013, FLTR, Shark Nose)
Road Glide™ Custom (2012, FLTRX, Shark Nose)
Road Glide™ Ultra (1998—2013, FLTRU, Shark Nose)
Street Glide™ (2006—2013, FLHX, Bat Wing)
Important notes
Saddlebag Kit compatible only with ABS plastic lids. Not compatible with Fiberglass lids. Saddlebag Kit not compatible with H-D® Power Lock Kit *Installation on CVO™ and Screaming Eagle™ models are not plug-n-play and will require modification
Verwandte Produkte
Wählen Sie die Artikel aus, die dem Warenkorb hinzugefügt werden sollen, oder