Rear View Camera Interface for VW, Audi, Seat & Skoda with MIB generation (from 2012)

Rear View Camera Interface for VW, Audi, Seat & Skoda with MIB generation (from 2012)

This rear view camera interface, you can easily listen to a reversing camera directly to current VW, Audi, Seat tie and Skoda models MIB generation.

Direct camera connection for Golf VII, T6 and Co.

A rear-view camera can be retrofitted with the interface among other things for the VW-Radios Composition Media, Discover Media and Discover Pro from the MIB-generation (modular infotainment platform). For coding at least parking aid / parking sensors (PDC) are behind necessary.

The following original radios can be currently encoded by VCDS or VW diagnostic to rear camera:

• VW: Composition Media, Discover Media, Discover Pro
• Skoda: Bolero, Amundsen, Columbus
• Seat : Media System Plus, navigation system

Quick & easy installed

The installation of the interface is simple via specially assembled Plug & Play cable kit. This provides proper 12V signals for reverse and ignition.

Additional installation time, cost savings and trouble

In other reversing camera interfaces often cables have wanted to be cut off and pulled or something eingepinnt. This Plug & Play solution saves you but time consuming and costly modifications to the vehicle wiring harness and minimize sources of error.

The CAN bus interface provides the following signals to:

• + 12V reversing signal (max. 180mA)
• + 12V ignition (max. 180mA)

For vehicles with no suitable radio system, the interface for signal delivery and for easy connection of other components can be as external rear-view cameras used with a separate monitor.