Backup Camera System: Universal Rear View Camera in License Plate with Rear View Mirror with Built-In 4.3" Monitor

Backup Camera System: Universal Rear View Camera in License Plate with Rear View Mirror with Built-In 4.3" Monitor

With this set maxxcount.de bring a solution to market that is universally suitable for car, bus, trailer and truck. The rear view camera is integrated into a high-quality EU-plate holder. Even when reversing in complete darkness you have a good view to the rear thanks to the built-in infrared LED. With a resolution of 640x480 pixels and 420 TV lines safe parking is no longer a problem. This high-resolution license plate - rear view camera with IP67 dustproof and waterproof. Thus, it is ideal for outdoor use as a reversing system.

Rear-view mirror with integrated 10,9cm (4.3 inch) monitor with 2x Video-in for rear view camera , DVD, TV, etc.

Unbelievable but true: a real rear-view mirror with mirror function and a built-in monitor!

Ideal for connecting a reversing camera, a TV tuner, DVD player, game console or other devices. As display will find a digital 4.3 "TFT LCD panel using, allowing an absolutely brilliant display. The monitor has a video input, it can be through this channel just the DVD player, DTT tuner, a reversing camera ( use automatic activation when reverse gear), etc.. It is mounted using the so-called "SNAP oN" mechanism, ie the mirror is simply plugged into their original rear view mirror and connected to the corresponding video source, done.

This device is ideal for those who have either installed no werkssetig and built by navigation display that have no possibility of a "large" Monitor accommodate or simply want to avoid "tinkering".

150° detection angle

The optics gives you a horizontal wide angle view of 150 degrees, so that the majority can be detected behind the vehicle. In addition, the camera is also vertically adjustable, meaning they can be adapted according to Tailgate type of vehicle (eg steep Combined tailgate or flat coupé tailgate).

power supply

The power is supplied via the 12 V connector of your car reversing light, so the camera automatically turns on when reverse gear. You can mount the camera on both the front and on the back of your vehicle. The image can be optionally mirrored and non-mirrored again displayed.

Grommet

From the camera itself is a 25cm long cable, this one grommet for the cable gland is already installed.

Night vision function

Due to the high light sensitivity of 0 lux, also allows images in the dark. The 4 infrared LEDs do not light as a conventional LED, but radiate mostly for the eye invisible infrared light and thereby provide a highly recognizable black and white image. It easily detects obstacles in the dark at a distance up to 5 meters.

Distanzliniendarstelllung in Monitor

About the camera module distance lines are also displayed with meter data in the monitor. This allows the distance to obstacles behind the vehicle better estimate. This function is switched on and off.