Customer Hotline
+49 (0)351 / 2145 12 12
Einkaufsoptionen
Hertz
-
Hertz DBX 25.3 Passive Subwoofer Box 25cm 150W 4 Ohm Single, 443x298x227mm - Dieci- 10“/25cm Passive Subwoofer Box, 32-400Hz
- 150W RMS / 600W Peak
- Very high efficiency subwoofer system with superior power handling
- Very thick MDF cabinet construction, strong and inert
- Angled rear wall, increases damping of resonances and provides easy fitment in any application
- Polypropylene membrane stiffened with mineral powders
- High excursion butyl rubber surround
- Deep ribbing on the surface of the cone increase rigidity
- High current plated terminals
149,00 €Incl. 19% VAT. , excl. Shipping Cost
Delivery Cost 6,49 € in Dtl.A21147Delivery Time 11 - 14 Days* -
Hertz MP 165P.3 16,5cm Woofer 100W 3Ohm 45Hz - 4,5kHz- 6,5“/16,5cm, 45Hz-4,5kHz, single voice coil 3 Ohm
- Power: 100W RMS / 200W Max.
- 14mm height pure copper voice coil wound on a Polyamide former
- 95 mm diameter magnet to maximize the control over the whole excursion
- Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight
- “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency
- Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting
- Optional full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill
149,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A22307Delivery Time 11 - 14 Days* -
Hertz SV 165.1 16,5cm / 6,5 inch Midrange 400W max. 4Ohm - SPL Show- 6,5" / 16,5cm, 100Hz - 10kHz, single voice coil 4 Ohm
- 400W Max power
- High magnetic permeability plates provide constant, even flux
- High density flux ferrite magnet, for top SPL performance
- Double layer copper voice coil, wound on KSV former; for excellent thermal and mechanical capability
- High current, tin-plated terminals
- Damped fabric surround; for maximum lightness and extreme SPL
- Water-repellent, pressed paper cone
149,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A21380Delivery Time 11 - 14 Days* -
Hertz CPX 165 16,5cm Coax Speaker 95W 4Ohm, 45Hz - 22kHz- 16,5 cm 2-way Coax system
- 95W RMS / 285W Max.
- 24 mm Tetolon® Neodymium Tweeter
- 16,5 cm Water-repellent pressed paper Ferrite Woofer
- Frequency range: 45Hz - 22kHz
- Installation depth: 66mm
- Efficiency: 92 dB
- High density ferrite magnet in combination with low carbon polar plates for a reduced distortion at high power levels
- 3-spoke, compact and transparent basket acoustically combined with an anti-vibration rubber magnet cover
- Stylish grille with high resistance ABS plastic frame with metal finish combined with a protective metallic mesh
139,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A20854Delivery Time 11 - 14 Days* -
Hertz CS 250 S2 10 Zoll / 25cm Subwoofer 300W, 1x 4Ohm, mounting depth: 115mm- 10“/25cm, single voice coil 4 Ohm
- Power: 300W RMS / 600W Max.
- Electroacoustic design optimized for enclosures starting from 16L
- Fluid dynamic optimization system drastically reduces acoustic distortions
- Polypropylene cone and dust cap geometry engineered through FEM simulations
- 35 mm 2 Ω voice coil wound on six layers of pure copper on a high thermal resistance glass fiber support
- Magnetic group geometry optimized with proprietary software for high undistorted SPL
- Ideal for use in custom boxes that can be shaped around the subwoofer thanks to its compact size and lack of the decompression hole
- Terminal block featuring solid push contacts that accept cables up to 8 AWG
- Rubber protection of the magnetic assembly and high-strength ABS plastic gasket
139,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A22911Delivery Time 11 - 14 Days* -
Hertz MP 165.3 16,5cm Woofer 90W 4Ohm, 40Hz - 5kHz- 6,5“/16,5cm, 40Hz-5kHz, Single Voice Coil 4 Ohm
- Power handling: 90W RMS / 180W Max.
- Pure copper voice coil wound on a Polyamide former for high power handling
- Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight
- “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency
- High density flux ferrite magnet combined with very low carbon content iron plates
- Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting
- Optional full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included
129,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A20878Delivery Time 11 - 14 Days* -
-10%Hertz MP 70.3 70mm / 3" Mille midrange 100W 4Ohm 88dB 180Hz - 18kHz incl. grill- 7cm / 3 inch midrange driver
- 100W max power
- 20mm (3/4 inch) CCAW voice coil
- High flux density neodymium REN® magnet
- Cotton fiber pressed paper cone with "Light Dampening"
- Frequency Response: 180Hz - 18kHz
- Installation depth: 44mm
- Efficiency: 88dB
- Impedance: 4 ohms
Regulärer Preis 139,00 € Sonderpreis 125,10 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A22935Bitte Delivery Time erfragen -
Hertz SV 250.1 25cm / 10 inch Mid-Bass Subwoofer 500W max. 4Ohm - SPL Show- 10" / 25cm, 90Hz - 7kHz, single voice coil 4 Ohm
- 500W Max power
- High magnetic permeability plates provide constant, even flux
- High density flux ferrite magnet, for top SPL performance
- Double layer copper voice coil, wound on KSV former; for excellent thermal and mechanical capability
- High current, tin-plated terminals
- Damped fabric surround; for maximum lightness and extreme SPL
- Water-repellent, pressed paper cone
119,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A21382Delivery Time 1 - 4 Days* -
Hertz CS 200 S4 20cm / 8" inch Cento Subwoofer 300W, 4Ohm - Offset: 115mm- 8"/20cm subwoofer
- Power: 150W RMS / 300W Max
- Impedance: 4 ohms
- Polypropylene membrane
- Magnet: High density flux ferrite
- Electro-acoustic design optimized for housings from 9.6 liters.
- Fluid dynamic optimization system that drastically reduces the acoustic distortions created by air compression at high excursions.
- Polypropylene cone and dust cap geometry developed through FEM simulations to reduce low frequency distortion.
- 35mm 4Ω voice coil wound on six layers of pure copper on a high thermal resistance fiberglass support.
- without speaker grille
119,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A22912Delivery Time 11 - 14 Days* -
Hertz DSK 165.3 16.5cm 2-way component speakers 80W, 4Ohm, 50Hz - 23kHz- 16,5 cm 2-way Compo system
- 80W RMS / 160W Max.
- 24 mm PEI Neodymium Tweeter
- 16,5 cm V-Cone® Ferrite Woofer
- Hi Pass crossover ( 3,5 kHz @ 12 dB Oct. )
- Frequency range: 50 Hz ÷ 23 kHz
- Installation depth: 64mm
- Efficiency: 93 dB
105,00 €Incl. 19% VAT. , excl. Shipping CostDelivery Cost 6,49 € in Dtl.A20859Delivery Time 1 - 4 Days*
